Used Cooling Device for sale (18,030)

Condition: like new (used), Year of construction: 2017, A complete welding system based on the KUKA KR 16 L8 arc industrial robot with KRC4 controller and Fronius CMT welding system. The system includes a KUKA KP1 positioner and a wire feeder with cooling. All main components are from 2017. Fgjdpey Hktnefx Apteg The kit includes a cleaning device and a laser device for automatic torch geometry correction (Rotolab), as well as a Siemens safety PLC. Technical data: Industrial robot: Model: KUKA KR 16 L8 arc HW, Serial No.: 867099, Year of manufacture: 06/2017, Number of axes: 6, Payload: 8 kg, Reach: 2015 mm, Weight: 240 kg Positioner/Rotator: Model: KUKA KP1-HC1000R980, Maximum payload up to 1 t, Serial No.: 152228, Year of manufacture: 06/2017, Weight: 850 kg FRONIUS welding machine: Type: TransPuls Synergic 400 CMT R, Serial No.: 28245623, Output: 400 A, with cooling unit Model: Fronius FK 4000-R FC, Serial No.: 28245627, Power supply: 400 V, Frequency: 50–60 Hz, Current: 0.6 A, Maximum pressure: 4 bar (0.4 MPa), Power: 2 kW, Protection class: IP23 Wire feeder: Model: Fronius VR 7000-CMT 4R/G/W/F++, Serial number: 28245629, Voltage U11: 55 V / 4 A, Voltage U12: 24 V / 2 A, Wire feed speed: 0.5 – 22 m/min, Welding current: – 400 A (100%), Protection class: IP23

Year of construction: 1981, condition: not inspected (used), Feinbau Precision lathe S1-So/KA 40 -WKG 986- Offered here is a fully automatic precision lathe from Feinbau. Technical data: Manufacturer: Feinbau Type: S1- So/KA 40 Year of manufacture: 1981 center height: 134mm Swing over bed: 272mm Max. turning length: 200mm Fjdpfshg Nm Rox Aptsgg Chuck: Ø 110mm (3jaws) quill feed: 140mm (tailstock) Usage: The machine is suitable for boring or reaming cylindrical turned parts. Accessories: Loading magazine for cylindrical turned parts 28mm Ø 40mm long. loading device Internal cooling device

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 Fedou R A Dlopfx Aptsgg machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm Fgjdpfsu Rwauex Aptjg total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 240 SL Year of manufacture: 2004 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Fjdpfezwv S Iex Aptsgg Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is currently in use at our customer's site and will be available from September. We would be pleased to offer the following services: - Cleaning and overhaul of the machine - Commissioning and training - Delivery - Clamping devices - Cooling unit - Transport

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Fedpfx Ajxlkg Aeptsgg

Condition: good (used), Inert gas welding device, arc welding system, MIG/MAG welding system Fgsdjlpi S Nopfx Aptsg -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Year of construction: 2021, condition: excellent (used), 1 x Selmi cooling tunnel Belt width 600mm Belt length 12 meters. * Manufacturer: Selmi Chocolate Machinery Fgjdpfxjzz I Nts Aptjg * Model: TUN1200 * Year: 2021 * Voltage: 380V / 3 Phase / 50Hz * Serial No.: TUN1200001216 * Manufactured in Italy

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Mash and wort kettle inner diameter approx.: 1000 mm Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Frequency: 50 Hz Operation / Control: “Braupilot” HMI control via touch screen Fgsdpfx Ajztwz Aeptsg Material: Stainless steel 1.4301 Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes

Year of construction: 2014, condition: good (used), functionality: unexamined, Description For sale is an industrial DC power supply / direct current power supply, Thumm SNT 20, from a decommissioned system. The unit is designed for high direct currents and is suitable for various industrial applications, testing systems, special machine construction, electroplating, coating, or process systems. Technical data according to the nameplate: Manufacturer: Thumm Type: SNT 20 Device type: DC power supply / direct current power supply Power: 30 kW Mains input: 3AC 400 V / PE, 50/60 Hz Output voltage: 1DC 0–30 V Output current: 1DC 0–500 A Regulation: Constant current / constant voltage Fgodpfxozap T So Aptsg Setpoint input: 0–10 V = 0–100 % for current and voltage Cooling: controlled fan Device protection: short-circuit proof, overload protection, thermal protection, mains monitoring Duty cycle: ED 70 % Year of manufacture: 05/2014 Weight: approx. 100 kg Device No.: 21401682 / 9-24 Condition The unit comes from a decommissioned industrial system. It is sold in its removed condition. We have not performed a functional test. See pictures for the visual condition. Inspection possible by appointment. Scope of supply The DC power supply / module shown in the pictures is for sale. Other identical or similar modules may be available upon request. Price A package price is possible when purchasing multiple units. Notes Sale exclusively to commercial customers. Subject to prior sale and errors. Sale is made without warranty, guarantee, or right of return.

Condition: new, Year of construction: 2026, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, overall weight: 1,550 kg, Equipment: CE marking, documentation/manual, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. Fgodpfx Asr D Nmksptjg You can give our managers a call for additional details! Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt Fgedpfozv Sa Eox Aptog - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V current intensivity 40 A output 15 kw operating pressure 4,5 bar weight 1.600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate Fgedpszbvmhjfx Apteg - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Fgodpjzi T Nhsfx Aptjg Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System Type: Temperature Control Unit for Washing and Elution Solutions Year of Manufacture: 2020 Serial Number: 1003563 Device Number: KK6752 Design: Stainless Steel Skid, Pharmaceutical Construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contact: Stainless Steel 1.4435 / 1.4404 Non-product contact: Stainless Steel 1.4301 Piping System: Orbital welding (pharmaceutical grade) Fedpfsyl Ipcsx Aptegg Fully welded construction As-built isometric drawing available Pressure Data: Leak test using compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and Control Technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit) Flow monitoring Position feedback Motor control On/Off pneumatic valves Pressure sensor measuring range: 0–10 bar Electrical Connection: Control air: 6 bar Automation-capable (PLT nodes fully documented) Main Components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling Medium: Chilled brine (supply/return interfaces available) ───── Dimensions / Weight Construction: Compact skid unit Industrial design for cleanroom/technical areas (Transport and installation dimensions as per layout drawing) Application Area Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Fields of Application: Biotechnology Plasma fractionation GMP production facilities Build / Construction Welded stainless steel frame Low-vibration pump mounting Hygienic piping Full implementation according to P&ID Clear separation between product and non-product areas Service and maintenance access tested Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID diagram check completed Layout drawing check completed Condition Manufactured in 2020 Industrial and pharmaceutical version New, original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout check P&ID check Leak test Sensor calibration Service and accessibility inspection EN10204 factory certificate Material lists (LBM) As-built isometry Component lists (equipment & PLT nodes) Special Features Pharma-GMP compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant construction by BRINOX High-end biopharma standard

Condition: good (used), Year of construction: 2016, total length: 2,500 mm, total width: 1,300 mm, total height: 1,600 mm, overall weight: 927 kg, input voltage: 400 V, power: 2.7 kW (3.67 HP), tank capacity: 1,000 l, Nowicki MA-1000 PSCH Tumbler with cooling The Nowicki vacuum tumbler with a capacity of 1.000 liters with the cooling option (with the cooling unit included) designed for plasticizing muscles, meat parts, small meats as well as poultry carcasses and parts in a vacuum. It ensures high quality of manufactured sausage products Design advantages:  acid-resistant design  precisely selected shape of the drum and tumbler blades system  microprocessor controller  smooth regulation of all massage parameters  maintenance-free vacuum regulation system  multi-stage protection system for the vacuum pump  technological hole  brine intake valve  pulsating vacuum  possibility of massaging in a replaceable (gas) environment  computer system for monitoring device operating parameters Manufacturer: Nowicki Model: MA-1000 PSCH Year: 2016 Fgsdpfx Aozlpa Ijptjg Capacity: 1.000 liter (500 kg.) Power: 400V / 50Hz / 2,7kW Machine dimensions LxWxH: 2.500x1.300x1.600 mm Machine weight: 927 kg.

Year of construction: 2026, condition: like new (used), Binder KB 720 E7 from 2026. Device in like-new condition with a 2-year spare parts warranty. PRODUCT DESCRIPTION A high-performance, versatile champion among cooled incubators for microorganism cultivation: the KB model provides highly precise incubation even at full load, hot air disinfection, and can be easily programmed for weekend refrigeration mode. The new KB incubator consumes up to 40% less energy compared to the previous model. KEY FEATURES Temperature range: 0°C to 70°C Proven APT.line™ preheating chamber technology Up to 40% energy savings compared to previous model Energy-efficient cooling thanks to modern inverter refrigeration unit Cooling with environmentally friendly R-600a refrigerant Door heating to prevent condensation Robust housing design with HIT sandwich technology Interior made entirely of stainless steel Inner door made of safety glass with metal oxide coating Two stainless steel wire shelves 3 access ports with silicone plugs Free-standing unit with durable, twin casters and front brakes Easy programming of a second set temperature value Fgsdpfx Ajy R T Hfsptsg Internal data logger, measurement values in open format readable via USB Independent class 3.3 temperature safety device (DIN 12880) with visual and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB

Year of construction: 2003, condition: ready for operation (used), This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Additional equipment • Scaffolding with cladding • Work tank // Flood tank 1 // Condensate tank // Flood tank 2 • Continuous distillation • Automatic sliding door • Water separator • Bogie without cover • Storage with drive • Drying cooler • Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device • HD - IFW Circulation filtration including chip rinsing • 6 baskets included Fodpfxezzn Hxj Aptogg Machine Benefits Technical Machine Benefits • Control panel • Ultrasound (1 rod transducer) • Heating fb2 • Hgz 028 cooling unit • Reinforced cooling (hgz 064 cooling unit and cooling coils in fb1, fb2, desti. ) • Filling/emptying device for fb2 • Dummy for fb2 • Preservation equipment • Single filter for fb1 // filtration for fb2 • Automatic feeding Extra Information Machine still under power

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Fsdpfx Ajzb Dr Sjptogg Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC Fodpfx Apsy Rmdwotegg WATER LEVEL SENSOR AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Condition: used, Year of construction: 1980, workpiece length 2700 mm swing dia. 630 mm clamping length 2700 mm stroke position adjustment 40-130 mm grinding wheel diameter 1000 mm weight of the machine ca. 18,5 t dimensions of the machine ca. 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools steady rest jaws diverse irrigation nozzle (workpiece cooling) washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Fjdpfsyukdzex Aptogg Your Markus Hirsch Team

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Fjdpfst Hwqqox Aptogg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1998, Technical Data: Grinding Area (incl. grinding wheel width 50 mm): 700 x 320 mm Grinding Height: 400 mm Longitudinal Stroke: 740 mm Cross Stroke: 270 mm Clamping Surface of the Table: 1000 x 250 mm Distance Table to Spindle Center: 650 mm Max. Table Load: 400 kg Infinitely Variable Spindle Drive: 6 kW Max. Grinding Wheel Dimensions: ø300 x 60 x 127 mm Coolant System: 170 l Weight – Total Equipment: 4600 kg Features: - Fully electronic multi-axis control system, Brand NE (Manufacturer: Schleier) - Brushless AC servo and spindle drives - Manual feed of CNC axes via movable electronic handwheel, axis selection, rapid traverse +/- as well as digital increment display integrated into handwheel - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication - Enclosed work area - Oil collection pans - CE marking Accessories: - 6x grinding wheel flanges incl. grinding wheels - 3x grinding wheel flanges - 1 extracting device for grinding wheel flange - 1 balancing arbor Fgsdpfx Ajxvy Hgspteg - 1 set of leveling plates and screws - Extraction unit - Extended vertical column for extraction unit

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Fgsdpfozc D Aaex Aptsg Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Year of construction: 2023, condition: used, control Siemens voltage 400V, 50Hz V current intensivity 40 A operating pressure 4,5 bar total power requirement 15 kW weight 1.500 kg In our assessment, the machine is in like-new condition. Fedpfozbvivsx Aptogg Technical Features - Dimensional inspection of the cooling plate using measuring heads - Automatic label application - Siemens control Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.