Used Cooling Technology for sale (31,817)

Condition: used, Year of construction: 2015, operating hours: 30,631 h, functionality: fully functional, machine/vehicle number: X658622, cooling capacity: 57 kW (77.50 HP), type of input current: three-phase, type of cooling: air, input voltage: 400 V, pressure: 44.5 bar, Equipment: type plate available, Chiller, Trane CGAM 020 model, with protective screen. Gbedezi Aacopfx Aatet

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Gjdpeyf Hlijfx Aatsbt Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Godjwhbnljpfx Aatebt

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Gbjdpeztaahjfx Aatst Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2014, functionality: fully functional, Güntner Axial Fan Condenser. Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vacegres, Hungary (EU). Gbedpfxsygyd Ij Aatst

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours Godpfezudabsx Aatsbt For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Gedpfx Aaerzq Aretebt Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 950 kW (1,291.64 HP), overall weight: 8,300 kg, total width: 2,260 mm, total length: 9,600 mm, total height: 2,300 mm, Equipment: cooling unit, Five Carrier chillers are available, all in excellent working condition. Gbodpjzz Itxsfx Aatst

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 10 kW (13.60 HP), Negative-temperature refrigeration unit with evaporative cooling for negative-temperature chambers, -20°C. Power: 10 kW Operating conditions: -28/35°C Gbodpfx Aaezz N Ttstst In very good overall condition.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: S36-1969, laser power: 60 W, type of cooling: air, total width: 830 mm, total height: 1,055 mm, total length: 1,221 mm, overall weight: 300 kg, We present the Trotec Speedy 360 CO2 laser with a power output of 60 watts, manufactured in October 2020. Equipped with Sonar autofocus technology, this laser is ready for immediate use and is fully functional. The scope of delivery includes: - Trotec Speedy 360 60-watt air-cooled laser and Atmos Duo plus HEPA 230V - Laptop including Win10 and CorelDraw - Aluminum grid cutting table - with pump for air supply - Rulers in mm - with masking tape - Extraction nozzle 75mm - Connection cable Technical data: - Working area: 813 mm x 508 mm - Dimensions: 1221 x 830 x 1055 mm Gbjdszzkg Iopfx Aatet - Laser power: CO2 60 watts - Laser source: CO2 laser, digitally controlled, air-cooled - Air assist: Improves cutting results by blowing away heat and gases - Movable starting point: Enables precise selection of the starting position for laser engraving/laser cutting - Resolution: User-selectable from 100 to 1000 dpi - Connection: USB interface

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Gbsdpsk Eakvjfx Aatjt Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Gbsdpfx Aajfzrgyjtst

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 495 kW (673.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,550 kg, input voltage: 400 V, total width: 2,450 mm, total length: 5,050 mm, total height: 2,750 mm, input current: 170 A, input frequency: 50 Hz, Equipment: compressor, freezer, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Gbsdpfx Aast Tfbqetjt Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Equipment: freezer, lighting, Set: EPTA Costan / Carrier Top Freezer + AHT Miami 250 freezer Deep freezer plug ready multi-purpose deep freezer furniture discounter Costan EPTA / CARRIER Top Freezer 2580 G Modern solution for expanding freezer capacity. Plug-in ready-made refrigerators. Technical data - photo added The freezer unit serves as an extension of the freezer and saves space. Godsz Aaihopfx Aatsbt Used machine - very good condition - tested and fully functional. REFRIGERANT - R290 LED lights. Wooden top cover – optional accessory. Freight costs depend on the weight, the volume and, above all, the distance. The following information is relevant when requesting: Delivery address (postal code and name of the town), but further details require a telephone conversation, so we ask you to inquire about transport costs and other delivery modalities to contact us by telephone. Our contact details can be found under the seller's legal information. Payment in cash, possible upon delivery on site. We sell and export worldwide; due to our very large storage capacity, we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon.-Fri.: 8 a.m.-4 p.m sat.: closed

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, TESA MH3D DCC coordinate measuring machine (CMM) for sale in very good, well-maintained condition and ready for immediate use. Features: PC-DEMIS Pro for Windows Version 4.2 MR4 Release software (legally transferable) Current calibration and maintenance performed on 09/09/2025 Renishaw MH20i / TP-ES probing system Includes several probe extensions and accessories Including EM1 extension exchange module, L=70 mm (new price 07/2025: €1,255 net) 1x TP20 SF probe module (standard probing force) 1x TP20 EF probe module (high probing force for long probe combinations) Functional HP computer included Calibration and measurement records available Operating manual on CD Additional, functional Renishaw Brown & Sharpe TP-ES probe head Original TESA Star-i probe head (defective) Additional Renishaw MIP probe head (probably defective) Various styli included (see pictures) Condition: Granite table in very good condition Axes run smoothly and precisely No problems with the air bearings Machine has been regularly serviced Used only in a metrology laboratory Immediately ready for production and measurement Typical wear marks present on one side of the guide rail; purely cosmetic and without any technical restrictions Air bearings run smoothly, without jolts, and precisely Calibration is current and within specification Inspection and functional demonstration possible by arrangement. Gjdpfx Aoy Taixoatebt Suitable for quality assurance, incoming goods inspection, manufacturing metrology, toolmaking, CNC machining, or metrology service providers.

Condition: good (used), Year of construction: 2010, total width: 1,100 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 300 kg, For Sale: Dosing Unit from Technology Unlimited Gbjdjzvdgqjpfx Aatjt - Type: Dosing Unit - Brand: Technology Unlimited - Year of manufacture: 2010 - Includes load cells - Pneumatic valve - Vibration sensor Overall dimensions: 1100 mm x 1200 mm x 2300 mm Ready for transport

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Gsdpezwfppefx Aatsbt Type: 91510 Machine number: 8708418 Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gbodpeycvxmofx Aatet Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2008, power: 300 kW (407.89 HP), For sale is a high-performance chiller unit from Cofely, including water treatment, optimized for supplying plastic processing machines (injection molding). The system is in good, operational condition. With the division into two separate water circuits (15°C and 22°C), highly efficient cooling of tools and machine components is ensured. All pumps were renewed in 2023. Technical data: - Year of manufacture: 2008 - Pumps replaced: 2023 - Cooling capacity: 300 kW - Application: Chiller for injection molding production (up to 20 machines) - Temperature circuit 1: 15°C (tool cooling) - Temperature circuit 2: 22°C (machine/hydraulic cooling) - Control: Central control cabinet in container - Evaporator dimensions (L*W*H): 3,500*3,500*4,500 mm Gbjdpsyvy Nwsfx Aatst - Technical center: Installed in a 20-foot container The system is offered ex works (self-collection). Dismantling and delivery can be arranged for an additional charge. Transport and loading can also be organized Europe-wide for an extra fee upon request. Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist. Trade-in or exchange possible! Machinery purchase/sale BUYING/SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell your machine? For further information or to get in touch, please visit our website.

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, MG MORI DMC 1150 V Year of manufacture: 2020 Machine type: CNC vertical machining center Travel distances X-axis: 1,150 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 42 m/min Direct linear scales in X / Y / Z Work table Table size: 1,460 × 750 mm CNC control HEIDENHAIN TNC 640 3D control DMG MORI ERGOline Control 19" screen Main spindle DMG MORI speedMASTER Tool interface: HSK-A63 Speed range: 20–20,000 rpm Spindle power: 35 kW / 25 kW Torque: 130 Nm / 86 Nm Values specified at 40 % / 100 % duty cycle Active spindle cooling Tool magazine 60 tool positions Gbjdszzm Dpjpfx Aatjt HSK-A63 Chain magazine Carousel Dual gripper Direct manual tool loading into the magazine Coolant / MQL Internal coolant supply Coolant through the spindle MQL 40 bar Paper band filter Tank capacity: 600 liters Chip conveyor Machine bed flushing Extended machine bed flushing Additional flushing bar on the right side wall Flushing volume manually adjustable Flushing gun for chip removal Enclosure roof Workpiece measurement technology Infrared measuring probe HEIDENHAIN TS 460 Automation DMG MORI PH 150 Pallet loading and unloading system Handling system with pallet magazine Round magazine 2 servo axes: X-axis Magazine table Z-axis pneumatic Gripping arm / fork IPC with touch panel DMG Automation Jobmanager OMRON package Graphically supported operator guidance PROFIBUS interface Automatic loading door on the right side of the machine PROFIBUS communication during the loading cycle 2-channel safety circuits Electrical automation interface version 4.0 4-color signal light Pallet system PH 150 basic round magazine: 10-position System expanded to pallet size: 500 × 500 mm In this configuration: max. 4 pallet storage locations Handling weight expanded to max. 250 kg per pallet incl. load EROWA zero-point clamping system EROWA UPC pneumatic zero-point clamping system Connection coupling on the table 2 active pneumatic lines Pneumatic release via 6 bar system pressure Pressure increase to 7.5 bar EROWA MTS clamping system Zero-point clamping station EROWA MTS Adapter plate: 410 × 410 mm 4 clamping elements Pitch: 250 × 250 mm Pallets 4 × EROWA MTS pallets Pallet size: 498 × 498 mm Pitch: 250 mm Incl. clamping studs and coupling Surface smooth Material: Aluminum The complete photo gallery is provided exclusively upon request. A sale to dealers is currently not possible. The complete order confirmation via DMG MORI will also be sent to you upon request.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Gbodpfx Aswmm U Usatjt

Condition: good (used), Year of construction: 2013, 1 used robotic welding system Gbedpfx Aasz Aac Uotot Manufacturer: Yaskawa with 2 robots, WIG AC and DC welding systems from EWM, spot welding tongs from Dalex, and 2 swiveling fixture systems Year of manufacture: 2013 Suitable for welding housings made of steel, stainless steel, or aluminum Technical specifications: Robotic welding system – specification / equipment Robotic welding system Dimensions W x D x H: 16,000 x 6,000 x 2,500 mm - S7 control for the fixture Double welding cell with 2 maintenance doors and 2 loading stations - opaque enclosure Robots / Positioners 2 Motoman 6-axis welding robots 1 x 50 kg version 1 x 165 kg version - extended design 2 x bases 1 x control unit with DX operating panel - Master - Slave 1 x mobile base with 2 parking stations 2 stations - rotary tables with integrated pneumatics for "clamp on" function Centrally programmable in sync via 1 robot controller Media connections for compressed air and electrical signals in the positioner Design and construction of a base frame for part holding Welding and clamping table S 4 3,000 x 1,500 mm with tool set 2 Digital I/O card for welding equipment EWM WIG welding system Tetrix 422 DC - RC Item no.: 520000050019 For automated and robotic applications Inverter DC welding machine Standard interfaces for automation (start/stop, pilot voltage, current flow), optional interfaces TETRIX RINTX11, industrial bus interface TETRIX BUSINTX11, documentation interface PCINT X10 (+ software Q-DOC 9000), and monitoring and documentation system WELDQAS Controllable parameters with interfaces: 256 jobs (welding tasks) with 16 programs each in program mode, as well as wire feed speed, correction of arc length and arc dynamics via pilot voltages, etc. Connection options: remote control, optional interfaces for automation, documentation, and PC connection Output 5 - 420 amps 420 amps 60% duty cycle - 40 °C 360 amps 100% duty cycle - 40 °C Mains connection 400 volts (-25% / +20%) Dimensions 654 x 576 x 374 mm Additional cost for AC/DC version – 1 unit EWM WIG cold wire feeder Tetrix Drive ROB Item no.: 520000040018 Quantity: 2 units Lightweight, compact wire feeder for mounting on a robot or fixture 4-roll drive Water cooling connection Control with digital incremental encoder Push Pull capable Separate button for wire retraction, gas test, and wire threading Setting and saving parameters centrally via the welding system control Wire feed speed 0.1 to 5 m/min Wire feed steps 0.01 m/min Weight 6.5 kg Dimensions 345 x 230 x 250 mm Left-opening design ABITIG WH torch system Swivel neck technology Push Pull drive for precise wire feed Water-cooled Output 400 amps Torch holder and changing station with pneumatic locking Design and construction of a part holder for an aluminum rear panel Resistance welding equipment / other components Resistance welding equipment for robots consisting of: - Medium-frequency inverter power source - Transformer with 250 kVA rated power - X-welding tongs High-performance water cooler Design and engineering Documentation such as machine design and parts lists in a simple format in German CE declaration Welding fume extraction system with piping

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine - 2050mm x 3050mm x 220mm High precision - milling and drilling with extremely high speed and quality. As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball-spindle drive on all axes offer you the highest precision, accuracy and speed - and all this with a pleasant price-performance ratio. Due to the structure with a high solid steel base frame approx. 4 t, a high static rigidity of the machine is achieved, so that the processing of solid wood and different metals is possible without any problems. The sophisticated position and distribution of the 35mm linear rails and guides and the associated massive portal with its vibration-damping properties characterize our CNC milling machines in particular. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly effective and backlash-free with the ball screw from German quality production and thus offer a feedback-free drive to meet even the highest demands. The superior, freely programmable CNC control enables flexible intervention by means of a touchscreen under all production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this CNC control you can create your milling data or import CAD/CAM data and then process them independently of a computer. The tool changer (up to 16 tools), the all-aluminum vacuum table, various tool/workpiece cooling solutions, the automatic lubrication system for all axes and other ingenious details round off this milling system. With the PFEIFER technology skycnc WK series you get a reliable and powerful large portal milling system for your applications. On request, we can supply the corresponding CAD / CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems or ArtCAM Pro / ArtCAM Insignia software in German / Russian etc. on request. - Drive system: high-precision ball screw on X and Y axis and Z axis from high-precision German production - Working speed: 15 m/min - xyz working area/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum tracks): 2000 x 3000 x 30 mm - xyz repeat accuracy: 0.02mm - XYZ Accuracy: 0.01mm - Compatible with Software Type3, ARTCAM, MASTERCAM, FeatureCam, etc. Gbjdpfsbnpgxox Aatot - Formats: ISO standard G-code, FANUC compatible - Addition: Spindle motor / Tool changer / Vacuum table according to customer requirements - Warranty: 1 year - Spindle power: from 5.5kW (other spindle powers optional) - Spindle speed: 6000 - 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine places - PDSP control RTU / MTU (Remote Terminal Unit) - Power input: AC400V±10% 50Hz - Power consumption 10-15 kW (depending on equipment) - Dimensions: 4500 (L) X 3100 (W) x 2500 (H) mm - Weight: 4000kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 131 kW (178.11 HP), type of cooling: air, aircooled Chiller MTA Gbjdpfx Aajyuvppjtet Cooling cap.131 KW (47 refr.tons), 2 circuits with each 2 scroll compressors, Direct expansion evaporator, with integrated pump and tank R 410a tested,ready for operation

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,764 h, functionality: fully functional, machine/vehicle number: 6640-105136, load capacity: 235 kg, arm reach: 2,550 mm, controller model: IRC5, repeat accuracy: 0.05 mm, number of axes: 6, TECHNICAL DETAILS Load capacity: 235 kg Reach: 2,550 mm Repeatability: ±0.05 mm Axis 1: +170° to -170° Axis 1 optional range of motion: +220° to -220° Axis 2: +85° to -65° Axis 3: +70° to -180° Axis 4: +300° to -300° Axis 5: +120° to -120° Axis 6: +360° to -360° Axis 6 standard rotation range: ±96 revolutions MACHINE DETAILS Controller: IRC5 Operating hours: 29,764 h EQUIPMENT Manipulator Godpfx Aezxqcwjatsbt IRC5 controller cabinet All cable sets Teach pendant