Used Coolius 2700 for sale (1,014)

Condition: used, mileage: 3,40,560 km, power: 260 kW (353.50 HP), first registration: 12/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, color: beige, gearing type: automatic, emission class: euro6, total length: 9,790 mm, total width: 2,600 mm, total height: 2,630 mm, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: Schmitz deep-freeze box * Refrigeration unit: Thermo King UT 800 * Temperature recorder * Box side wall: 50 mm * Double-wing doors: 80 mm Feroplast * Storage compartment, high engine tunnel * Axle load measurement device * Front axle load: 8.0 t Rsdpfx Aiozuhlbjrsch * Trailer stabilization program: TSA * Audio system: Digital radio DAB / DAB+ * Equipment package: Comfort * Cab: steel-sprung, Comfort * Sun visor, side window, driver's door * Driver's seat: Comfort, air-suspended * Airbag, driver's side * Equipment package: Visibility * Bi-Xenon headlights * Rear lights: LED * Headlight cleaning system (HCS) * Exterior mirror, right, with maneuvering position * Battery: 220 Ah * Brake connection: Standard and DuoMatic * CB radio * Cockpit: Interactive multimedia * Navigation system * Remote query function: Remote Online * High-pressure air unit * Air horn * Electrical pre-wiring in the cab: 24V / 100 A * Driver assistance system: Turning assistant * Transmission: 12-speed - Type: G 211-12 * Manual lift roof (steel) * Automatic climate control * Fuel tank: 290 liters, aluminum, right * Air deflector, roof (lockable) * Engine brake: enhanced * Wheelbase: 5500 mm * Frame overhang: 2700 mm * Reversing warning: acoustic and warning flashing light (external warning signal) * Tail lift switch * Seats in the cab: Driver's seat with massage function * Exterior sun visor * Additional stabilizer: rear axle / trailing axle * Additional 12V / 15 A socket in the co-driver's footwell * 24V / 25 A socket in the co-driver's footwell * Preparation for 4 surround cameras (display in the onboard monitor) * Preparation for additional headlights * Preparation for additional turn signals * Auxiliary heater (water) * Additional equipment: * Reversing camera * Emission standard: EURO 6D * Axle configuration: 4x2 * Actros 5 * Actros cab: S / M * Approach / front mirrors, heated * Trailer brake: 2-line, connections on the left * Trailer socket: 24V / 15-pin * Exhaust pipe directed to the center of the vehicle * Batteries arranged side by side * Differential lock: rear axle * High-pressure air unit with condensate monitoring * Automatic switching for dipped headlights (light sensor) * Cab: Hydraulic tilting mechanism * Cab: M ClassicSpace, 2.30 m, tunnel 320 mm, cab floor with engine tunnel 320 mm, cab: width 2.30 m, cab variant: M * Storage flap, external, left * Storage compartments with lids behind the driver's and co-driver's seats * Vehicle outline lights: LED * Suspension: Air / Air (full air) * Power windows * Windshield: tinted * Speed limiter * (AdBlue): 60 liters * Comfort locking system * Air intake from the front * Heated air dryer * Engine: 7.7 liters - 260 kW R6 Diesel (OM 936), engine variant OM 936 * Waste heat recovery * Disc brakes: front and rear axles * Key with remote control (2) * Side marker lights: LED, flashing * Seats in the cab: Co-driver's seat * Splash guard, front * Stabilizer: front axle * 12V socket in the co-driver's footwell * Tachograph / EC tachograph * Truck Data Center 7 (fleet management system) * Underrun protection, front * Preparation for toll collection * Preparation for Truck Data Center (fleet management system) * Front axle: curved * Permissible total weight: 18.00 t * Errors, changes and prior sale are subject to change.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function, perforated sheet metal floor, manual cable winch Equipment: - Tilting loading platform - Perforated sheet metal floor - Approach angle: 11° Net: €5,168.07 / Gross: €6,150.00 Article number: MGK230482000.04 Technical data: • Brand: Martz • Model: GT TILTING 480 • Vehicle type: Car transporter • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 469 x 209 x 0 cm • External dimensions (L x W x H): 689 x 215 x 103 cm • Permissible total weight: 3,000 kg • Tare weight: 793 kg • Payload: 2,207 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Lohr steel lashing points, ideal for secure lashing with VDI 2700 8.1 certification • Centrally located between the lashing points: aluminum tread plate floor, non-slip and waterproof • Includes a continuous loading platform that acts as a wedge at the rear • Hydraulically tilting loading platform (11° approach angle) • Very low chassis for a low approach angle • Very lightweight trailer with a robust design • Additionally, 4 lashing eyes in the side floor • Manual cable winch at the front with a pulley for 3 positions • Braked rubber spring axles from KNOTT • Reverse assist • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar, REINFORCED • 13-pole plug • Reversing light Rcodpjzy At Dsfx Airsh • Large-sized safety lighting, can be swiveled away • Integrated rear fog lamp • Rear position lights mounted • Foldable license plate holder, can be driven over • Automatic support wheel mounted _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: used, Fixed Bed Milling Machine VERNIER DB 420 Travel X: 1200 mm Travel Y: 420 mm Travel Z: 600 mm Command HEIDENHAIN Spindle SA40 Spindle speed: from 40 to 2000 RPM Table size: 1600 x 400 mm Horizontal + vertical tilt head Spindle motor: 7,5 KW Feeds: auto X - Y - Z Voltage: 380 V Rcjdpfxozw A Dwo Airsh Width with ends table: 2700 mm Depth: 2500 mm Total height: 2200 mm Weight: approx 4,5 T

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rcsdjzx Amnspfx Airjh Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Vacuum raster table Edge milling unit along X-axis Year of manufacture: 2011

Condition: used, empty load weight: 6,800 kg, maximum load weight: 32,200 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 05/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 93 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 40 %, color: white, Year of construction: 2020, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, tail-lift, truck registration, Vehicle number for inquiries: 41564 Krone, SD * Year of manufacture: 2020 * ABS, Anti-lock Braking System * EBS, electronic brake system * Tail lift * Air suspension * New tarpaulin * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * Air connection coupling head (red + yellow) * Automatic air connection (Duomatik) * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering device * Storage box/tool box * Suspension: Air * Gross weight: 39,000 kg * Tare weight: 6,800 kg * Payload: 32,200 kg * Permissible gross weight: 39,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 40% -- 40% - Tire size: 385/65 R22.5 Rcsdpfx Aijzwt Dhoreh * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13,620 mm, W=2,480 mm, H=2,780 mm * Internal volume*: 94 m² * Pallet spaces: 34 * Side tarpaulins new * Tail lift: BÄR Cargolift 2500kg * Upon request, we will send you a video and more pictures. Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase/Sale/Rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading/cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists, we will be happy to advise you. Reference no. for inquiries: 41564

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood Rcodpfx Aiszuw Ixsrjh - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Rjdpfxozt Ih Te Airjch Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: used, mileage: 2,58,000 km, power: 309 kW (420.12 HP), first registration: 02/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total length: 9,570 mm, total width: 2,550 mm, total height: 3,500 mm, loading space volume: 37 m³, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,050 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, * Sweeper wall system, Orten Kettliner * DEKRA certified according to VDI 2700 and DIN EN 12642 Code XL * Beverage certificate * Draught beer certificate Redpfjz Al Nmox Airsch * Chemical certificate (IBC) * 4 rows of load securing * 2,000 kg Bär tail lift * Ball and pintle hitch * Liftable trailing axle * Reversing camera * Navigation system * Medium-length cab * Differential lock * Fully air-suspended * Heated seats * 8-speed gearbox * EVB brake (3-stage retarder) * Air conditioning * Cruise control * Heated seats * Euro 6

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed Rjdpfsz Dth Rjx Airech • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: new, Year of construction: 2023, power: 7.5 kW (10.20 HP), intake manifold diameter: 300 mm, Exhibition machine, year of manufacture 2023 Technical data DM-300/P-B Motor power 7.5 kW Nominal volume flow 20 m/s, 5089 m³/h Max. air volume flow 6000 m³/h 2700 Pa at 20.5 m/s in dusty conditions Filter area 31.8 m² Filter cleaning: JET cleaning system Residual dust content: less than 0.1 mg/m³ Dust collection volume: 480 liters Sound pressure level: 70 dB(A) Power supply: 400V/50Hz Nominal current: 14.0 [A] 5 m connection cable with 32A CEE plug, 5-pole, with phase inverter Weight: approx. 780 kg Dimensions (L x W x H), max. 3245 x 1030 x 2595 mm Includes extraction nozzle Extraction nozzle with flange, 300 mm (left) Rcodpjz At Nhjfx Airsh With extinguishing system (no water connection required)

Condition: used, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 4,750 mm, fork length: 1,200 mm, total length: 4,320 mm, · Lastabstand, Mitte der Antriebsachse bis zur Gabel: 621 mm Rcodpfx Aijyf N A Dsrsh · Vorderachslast (beladen) / Hinterachslast (beladen) 5970 kg / 820 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 1780 kg / 2510 kg · Vorderspur 1159 mm · Abstand zwischen den Hinterrädern 1176 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2155 mm / 1990 mm · Sitzhöhe 1094 mm · Wenderadius 3405 m · Fahrgeschwindigkeit (beladen / unbeladen) 12 km/h / 24.50 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.47 m/s / 0.46 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.30 m/s · Zugkraft 3100 daN · Steigfähigkeit - beladen 51 % · Festellbremse: Hydraulik bremst durch Druckverlust · Motornorm: Stage V · Motorleistung gemäß ISO 1585: 37 kW · Nenndrehzahl 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 3 - 1826 cm³ · Steuerung Elektronisch · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 200 bar · Ölmenge für Anbaugerät 42 l/min

Condition: used, Manufacturer: Koppens Model: ST14000/600 Condition: Used Serial Number: 35 Stock Number: 3397 Belt width: 600 mm Cooking length: 13000 mm Heating: Steam, 780kg/h (6 bar) Steam pressure: 4 - 8 Bar Power: 3 x 380V, 50Hz, 1.5kW Dimensions: 14400 x 2000 x 2700 mm Rodpjzhmuhsfx Airech Weight: 4850 kg Temperature distribution in 2 zones, electric hoists

Condition: excellent (used), functionality: fully functional, Stainless steel vertical screw conveyor Dimensions: 3600 x 450 x 550 mm Screw diameter: 300 mm Screw pitch: 300 mm Lifting height: 2700 mm Professional, inclined screw conveyor designed for vertical and angled transport of bulk products, fine-grained materials, and food semi-finished products. Thanks to its robust stainless steel construction, the device perfectly meets the standards prevalent in the food industry (HACCP/IFS), enabling the safe transfer of raw materials between process stages such as dosing, grinding, or packaging. Rcjdpfezczr Eox Airoh Its compact design, with an overall length of 3600 mm and a high lifting capacity (2700 mm), makes this conveyor an extremely versatile tool, suitable for meat processing plants, vegetable processing facilities, catering services, and the feed industry. The screw mechanism with a diameter of 300 mm ensures a stable and consistent flow of product, minimizing the risk of blockages and degradation of the raw material during transport.

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Rcodpfx Aiezf Eh Usreh Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2006, laser power: 4,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, overall weight: 11,500 kg, total width: 5,300 mm, total height: 2,000 mm, product length (max.): 9,800 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 3030 was manufactured in 2006. It features a working range of 3000 mm in the X direction and 1500 mm in the Y direction, with a maximum positioning speed of 60 m/min. The machine is equipped with a TRUMPF CNC path control based on Siemens SINUMERIK 840D. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 3030 CO2 laser cutting machine we have for sale. Contact us for further details. • Max. positioning speed: 60 m/min (parallel to axes); 85 m/min (simultaneous) • Drive type: Maintenance-free three-phase AC servomotors on X, Y, Z • CNC control: TRUMPF CNC path control based on Siemens SINUMERIK 840D • Minimum programmable travel step: 0.01 mm • Positioning accuracy: ±0.1 mm • Average position dispersion: ±0.03 mm • Compressed air consumption: • With TLF 2000–3200: 31 m³/h (516 l/min) • With TLF 4000: 42 m³/h (700 l/min) • Laser power options (cw) and max. structural steel thickness: • TLF 2000: 2000 W / 12 mm • TLF 2700: 2700 W / 15 mm • TLF 3200: 3200 W / 20 mm • TLF 4000: 4000 W / 20 mm • Electrical connection and fuses (50 Hz / 400 V): Redpfx Aijzf H Aaorjch • TLF 2000: 63 kVA / 100 A • TLF 2700: 71 kVA / 125 A • TLF 3200: 73 kVA / 125 A • TLF 4000: 88 kVA / 160 A Additional equipment • Dust extractor • Control cabinet • HF generator • Cooling unit

Condition: used, mileage: 2,66,810 km, power: 213 kW (289.60 HP), first registration: 11/2013, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 11/2026, gearing type: automatic, emission class: euro5, loading space volume: 3 m³, loading space width: 2,350 mm, loading space length: 3,200 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, all wheel drive, crane, * Sun visor Rcjdpfszpca Nsx Airsh * ABS * Cruise control * Power windows * Power-adjustable mirrors * Mirror heating * Fog lights * Rear window * 3rd seat * Front axle differential lock * Rear axle differential lock * Transfer case * Steel bumper * Orange rotating beacon * Air intake on top * Exhaust behind the cab * Trailer coupling * 2-line air connection * Hydraulic connection for trailer * Municipal vehicle * Radio * Rear view camera * Hill start assist * Heated windshield * Service booklet maintained * Driver's air suspension seat * Off-road driving program * Snow chains * 12-speed * Suspension: leaf spring/air * Payload: 7420 * Continuous brake: engine brake ----Special superstructure: Crane: Palfinger PC 2700 B, maximum lifting capacity 2 t, foldable, 3-stage hydraulic extension, right/left operation. Load diagram: lifts 1.5 m - 1.7 t, 2.7 m - 0.95 t, 3.8 m - 0.66 t, 5 m - 0.5 t ----Superstructure: Meiller 3-way steel, front panel raised, spring-relieved sideboards left + right, lashing eyes.----Mounting plate for snowplow (detachable) with hydraulic and electrical connections, additional headlights, additional hydraulic connections on the right. Vehicle is service booklet maintained, last service performed in 11/24 at 237,000 km! For sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations are our general terms and conditions (see imprint).

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, shelf length: 2,700 mm, load capacity: 600 kg, frame height: 9,000 mm, Jungheinrich MPB pallet racking – over 1,000 frames and several thousand beams We offer for sale a very large quantity of used Jungheinrich MPB pallet racking. Available components: Frames: heights from 3000 mm to 10,000 mm, over 1,000 units, various height and load-bearing capacity options. Rcsdpfxezrnnke Aireh Beams, 2700 mm long: load capacity 3 x 500 kg, load capacity 3 x 600 kg, load capacity 3 x 800 kg. Beams, 3600 mm long: load capacity 4 x 500 kg, load capacity 4 x 600 kg. A total of several thousand beams are available, allowing for the preparation of both individual racking rows and complete warehouse installations. It is possible to purchase entire batches or selected quantities. Upon request, we will prepare a configuration tailored to the warehouse height, the type of pallets, and the required number of pallet spaces. We also offer: dismantling and assembly of racking, transport, preparation of a layout plan, selection of additional components and safety features. Please contact us to obtain a detailed offer, an up-to-date list of available components, and photographs.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA Robot KR 240-2 2000, Serial Number 910453, Industrial Robot including Control Cabinet 57278 The KUKA KR 240-2 robot is a 6-axis robot arm with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications for the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, polishing, material handling, palletizing, and remote TCP. Specification: Manufacturer: KUKA Model: KR 240-2 2000 Type: Robot Arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Serial Number: 910453 Control Cabinet: 57278 Year of Manufacture: 02/2008 Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the quantity, weight, and desired delivery conditions. Rjdpfx Ajzmqq Rsirech Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Forwarding costs available upon request – please specify delivery address.

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Rcodpezqgllsfx Aireh Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: used, maximum load weight: 12,240 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2016, loading space length: 7,750 mm, loading space width: 2,490 mm, loading space height: 2,200 mm, loading space volume: 43 m³, total length: 10,066 mm, total width: 2,550 mm, total height: 3,675 mm, Year of construction: 2016, Equipment: ABS, tail-lift, * Orten Kettliner superstructure * Double-wing door at the front for through-loading into the truck * Loading area dimensions: 7,750 x 2,490 x 2,200 mm * DEKRA certified according to VDI 2700 and DIN EN 12642 * Beverage certificate * Draught beer certificate * 4 rows of load securing * 2,000 kg Bär loading platform * SAF axles * Disc brakes * Air suspension Rjdpfozq Irtsx Airoch * ABS

Condition: good (used), Year of construction: 1985, functionality: fully functional, Chalet construction machine for log house production Year of manufacture: 1985 Manufacturer Norway / Finland Workpiece height max. 200 mm Workpiece width max. 250 mm 1. Face groove milling unit Cutter diameter max. 220 mm Cutter width max. 60 mm Rcodpfxov Dxn Ao Aireh Motor 2.2 kW, 2900 rpm Pneumatic feed 2.Drilling unit Clamping diameter max. 16 mm Drill diameter max. 16 mm Motor 1.1 kW 1450 rpm 3.Horizontal milling unit Cutter diameter 210-240 mm Cutter width 40-100 mm 2 motors each 2.2 kW, 2900 rpm Vertical milling unit Cutter diameter 210-240 mm Cutter width 40-120 mm 2 motors each 2.2 kW, 2900 rpm Hydraulic feed, hydraulic unit with 3.0 kW with 2 x 4 pneumatic workpiece clamps Pneumatic pressure 7 – 10 bar Air consumption Nm³/h 8 Operating voltage 380 V, 50 Hz Dimensions Machine width 2700 mm Machine depth 1830 mm Machine height 2180 mm + hydraulic unit L x W x H = 0.8 m x 0.36 m x 0.8 m Weight 1,500 kg

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Rcodpfx Asxddvnsireh Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: new, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,750 mm, total length: 5,100 mm, · Hersteller Manitou · Modellname MC 30-4 ST5 · Antriebsart Diesel · Bedienertyp Sitzen · Max. Tragkraft 3000 kg · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 626 mm · Standard mast reference of the machine FVD 33 · Vorderachslast (beladen) / Hinterachslast (beladen) 6650 kg / 790 kg · Bereifung Pneumatisch · Reifengröße, vorn 12,5/80-18/12 SL R4 · Reifengröße, hinten 27x10-12 SKS · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 Rsdpfx Aisxd Hvqorjch · Vorderspur 1159 mm · Abstand zwischen den Hinterrädern 1176 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2155 mm / 1990 mm · Sitzhöhe 1094 mm · Gabelträger DIN 15173 A/B 3A · Gang· breite für Palette 1000 x 1200 quer 5461 mm · Wenderadius 3435 mm · Fahrgeschwindigkeit (beladen / unbeladen) 12 km/h / 24.50 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.47 m/s / 0.46 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.30 m/s · Zugkraft 3100 daN · Steigfähigkeit – beladen 46 % · Festellbremse Hydraulik bremst durch Druckverlust · Nennleistung Verbrennungsmotor 37 kW · Hersteller / Motor Modell / Motornorm Kubota / D1803 CRT E5B / Stage V · Nenndrehzahl 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 3 - 1826 cm³ · Steuerung Elektronisch · Ölmenge für Anbaugerät 42 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 79 dB

Condition: used, Year of construction: 1996, Labelling machine for neck, body and back labelling of glass bottles. Additional title: neck-, body- and back labeling Capacity: 40000 Fl/h Length: 2600 mm Width: 2800 mm Height: 2700 mm Formats: various label tables 0.5L NRW, 0.33L Vichy, 0.33L Euro Running direction: left -> right Rcodpfxow Taugo Airsh Operation / Control: Simatic OP7-Panel, Krones KES 5 Position: free standing

Condition: used, maximum load weight: 29,947 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 04/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, total length: 13,830 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Strong Light Curtain Side Semi-Trailer Fifth Wheel Height: 1145 mm Side Loading Height with Lifting Roof and Internal Height 2700 / 2610 mm Side Loading Height without Lifting Roof and Internal Height 2700 / 2560 mm Neck Height: 120 mm Overall Length: 13,830 mm Platform Internal Length: 13,620 mm Overall Width: 2,550 mm Platform Internal Width: 2,480 mm Internal Width Between Stanchions: 2,480 mm Internal Width Between Longitudinal Beams (without lifting roof): 2,480 mm Internal Width Between Longitudinal Beams (with lifting roof): 2,430 mm Axle Spacing: 1,310 mm Kingpin to 1st Axle Distance: 6,390 mm Technically Permissible Gross Weight: 42,000 kg Technically Permissible Axle Load: 9,000 kg Technically Permissible Fifth Wheel Load: 15,000 kg Accuracy: +/- 4% n.d. External Height: 4,000 mm Unladen Weight: 6,053 kg Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel area. Welded construction, weight-optimized, made from high-strength S700 steel Air suspension Side underrun protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Floor made of 30 mm phenolic resin plywood, load capacity 7.5t plus steel chequer plate at rear approx. 270 mm deep Steel lamp carrier Lashing rings - 19 pairs, 2T each Rubber bumpers at rear Rigid rear underrun protection Steel rear underrun protection Axles and Suspension Rcsdpfx Aiow N Ua Noreh Number of axles: 3 Rigid axles No axle lift on 3rd axle BPW disc brake axles 3x9000 kg, 22.5 ECO PLUS 3 clamp BPW ET=120 1st Lift axle Fifth wheel height: 1145 mm Landing Legs SAF Hercules two-speed landing gear, full load Fenders PVC fenders – 1 shell, 2 front, 2 rear Rims 6x aluminum rims 22.5x11.75 ET-120 ALCOA DURA BRIGHT Tyres 6x tyres 385-65-22.5, manufacturer optional Other Chassis Equipment Warning panel mounted on rear underrun protection Bozamet 32 pallet box Two chocks with mountings Body Internal height: 2,700 mm Top boards – 4 rows 1st row: aluminum side boards, H=100 mm, 8 pcs. Lifting roof (0, +50) Side curtains with 18 curtain tensioners, side curtain 900 g/m² Aluminum front wall Front wall collision protection (plywood), H=1,500 mm 2nd row: aluminum side boards, H=100 mm, 8 pcs. 3rd row: aluminum side boards, H=100 mm, 8 pcs. 4th row: aluminum side boards, H=100 mm, 8 pcs. Quick-release curtain tensioner at front Curtain tensioning device at rear Sliding roof, both sides openable, EDSCHA HYBRID Rear wall with aluminum double wing doors Brake System/Pneumatics Aluminum air reservoir Brake system (Knorr, Wabco, Haldex), manufacturer optional RTR automatic self-leveling (Standard brake system Wabco or Knorr with H-S valve) Chassis Paintwork Chassis painted in RAL 3002 (Carmine red) KTL coating Curtain Colour Side curtain colour Roland 3015 ~ RAL 3002 (red) Other Equipment Paintwork Two-sided paintwork (powder coating) for front wall, doors, and corner posts Additional paintwork in RAL3002 (Carmine red) Electrics 2x 7-pin + 1x 15-pin connections with EBS connection, without connecting cables to the tractor unit Hella LED EASYCONN lighting Markings Partial contour marking with Wielton logo Partial contour marking, side white Partial contour marking, rear red Wielton warning stickers Labelling in German Certificates/Homologation XL Certificate Beverage Certificate All details are subject to change. Errors excepted. Subject to prior sale.