Used Copy Device for sale (11,636)

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Guedpfx Asxxmf Ieg Sjh Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Guedpjib D H Refx Ag Ssh Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: used, Year of construction: 1985, used in excellent condition low mileage cleaned functionally tested partially refurbished Manufacturer: Flott Type: 484001 Year of manufacture: 1985 Machine no.: 31840024 Manual copying device Fixed tailstock Four-jaw chuck Drill chuck mm: 125 Speed stages: 500 - 750 - 1125 - 1700 - 2500 Guodpfsz Np Irjx Ag Sjh Center distance approx. mm: 1200 Center height approx. mm: 240 Motor kW: 1.5 Space requirement approx. L x W x H mm: 2100x800x1100 Weight approx. kg: 350 Total connection value kW: 1.5 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, CATALOGUE NUMBER: 7650 Technical data: - max. working length: 1500mm - max. working diameter: 250mm - milling (disc milling cutter): 7.5kW - spindle – 2800 rpm, 3kW - spindle speed: 700/1200/1500/2000 rpm - grinding unit: 0.75kW - hydraulic motor: 3kW - total power: 17.75kW - air consumption: 6-8 bar - infeed for square stock up to 150x150mm - dust extraction port diameter: 100mm, 160mm - transport dimensions (L/W/H): 4350x2300x1980mm Gedpfx Aoztrfceg Sjuh - weight: approx. 3000kg ADVANTAGES: - manufactured in Germany - automatic hydraulic copying device - original technical documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 13930 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment via fine-threaded spindles, adjustable from the front and rear. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Gjdpfezfwm Njx Ag Ssuh Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid Four-jaw steady rest Four-jaw chuck 125mm Copying tools, center punches, hexagonal drive dogs, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition from a small carpentry shop. The machine was obviously not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this supplier".

Condition: used, functionality: fully functional, overall weight: 3,000 kg, operation weight: 3,000 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space volume: 18 m³, loading space width: 2,000 mm, loading space length: 3,000 mm, loading space height: 3,000 mm, Year of construction: 2022, operating hours: 2,000 h, machine/vehicle number: K22092001, ## Complete Nitrogen Generation System – Generator + High-Pressure Booster + Chiller For sale: a complete industrial nitrogen generation and high-pressure supply system, designed for use with high-power fiber laser cutting machines. The system allows nitrogen to be generated on-site and supplied to the laser at the required high pressure, significantly reducing dependence on liquid nitrogen deliveries. ### Complete system includes: * Nitrogen generator * High-pressure nitrogen booster * Industrial chiller / cooling system * Control system * Filtration and necessary system components ### Technical specifications: Nitrogen generator Gedpfjzv T Absx Ag Souh * Nitrogen purity: up to [99.99%] * Nitrogen capacity: [30 Nm³/h] * Outlet pressure: [8 bar] * Automatic operation High-pressure booster * Maximum nitrogen pressure: [200 bar] * Capacity: [25 Nm³/h] * Designed for continuous industrial operation * Suitable for fiber laser cutting applications Chiller * Cooling capacity: [XX kW] * Designed for cooling the nitrogen booster/system * Industrial continuous-duty design ### Application The system was used for supplying nitrogen to a high-power fiber laser cutting machine. Suitable for laser cutting of: * Stainless steel * Aluminum * Carbon steel and other materials where high-pressure nitrogen cutting is required The equipment is sold as a complete system. Condition: Used, fully functional Location: Lithuania Availability: Immediately available The system can be inspected and tested on site. More photos, videos, and detailed technical specifications are available upon request. Worldwide transport can be arranged.

Condition: used, Technical details: base plate: 210x110 mm Guedpeu Nuq Iofx Ag Sjh weight of the machine approx.: 60 kg space requirements of the machine approx.: 0,7x0,52x0,5 m copy device for grinding machines for grinding wheel forming ( profile device) details: - adjustment travel upper table longitudinal=60mm (manual) - transverse travel = 20mm - under frame=approx. 60mm ( lockable) - template table size 310x150mm perfect used condition *

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Tool presetting machine / used Manufacturer: Garant Type: VG1 Year of manufacture: 11/2022 Gedpfx Agez Sb Drs Ssuh Serial number: XXXXX • 15-inch touchscreen, intuitive and user-friendly operation via icons • With calibration equipment on the base plate • Digital camera with 24x magnification • Quick adjustment of both axes (X / Z) individually or simultaneously • Fine adjustment of both axes (X / Z) • Spindle with 4 x 90° indexing and spindle brake • Roundness and flatness error of the spindle max. 2 µm • With SK50 base adapter + HSK-A63 + VDI-30 adapter Technical data: • H x W x D: 1,060 x 400 x 860 mm • Weight: 150 kg • Measuring range X/Z: 400/500 mm • Includes label printer

Condition: good (used), Year of construction: 1966, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, container rotating device, welding rotating device type 406/2 G -Load capacity: kg -Roller spacing: 290 - 1100 mm -Rollers: Ø 225 x 300 mm -Rolling speed: 0.24 to 1.30 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos Gjdpfxjz Ruwuj Ag Ssuh -Transport dimensions: 1380/1110/H900 mm / 940/660/H900 mm -Weight: 706 kg / 463 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, The Koch company’s material suction unit is available; the price is for one unit. All units are equipped with a level sensor, a material lock, and a funnel. There are 13 units in stock. Godoz Nxlmjpfx Ag Ssuh Voltage: 24 V DC Height: 595 mm Weight: 12 kg Discharge connection: Nominal size: 40 mm Base size: Z5/Z12/Z24 Level sensor Material lock

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Gusdjz N Smdepfx Ag Sjh

Condition: excellent (used), Year of construction: 2020, ZOLLER EZset 350 – Professional CNC Tool Setting and Measuring Device – 2020 For sale is a professional ZOLLER EZset 350 measuring device, manufactured in 2020, designed for the precise setting, measurement, and inspection of cutting tools used in CNC machine tools. The ZOLLER EZset 350 is an industrial tool measuring system for offline tool measurement, enabling accurate determination of tool length, diameter, and geometry before machining. The device reduces CNC machine setup times, minimizes setting errors, and increases production efficiency. Technical data * Manufacturer: ZOLLER – Germany * Model: EZset 350 * Year of manufacture: 2020 * Type: CNC tool setting and measuring device (Tool Presetter) * Z-axis measuring range: up to 350 mm * Measuring system: optical, with camera * Control: computer-based with touchscreen * Software: ZOLLER pilot / Drive Snapshot 1.4 – according to the markings visible on the device * Computer panel: MOSTRON PPC3-13 * Device order number: EZS350C1T-00141 * Identification number: PMT0221 * Panel power supply: 12–24 V DC Device functions * Measurement of cutting tool length * Measurement of tool diameters * Inspection of CNC tool geometry * Setting of tool corrections * Optical measurement of cutting edges * Measurement of tools before mounting in the machine tool * Support for tool wear monitoring * Reduction of CNC machine downtime * Increased repeatability of settings Equipment shown in the pictures * ZOLLER EZset 350 measuring device * Integrated optical system * Computer panel with touchscreen * Tool holder / spindle for mounting tools * Work table with frame * Pneumatic system with pressure regulator * Label printer * Additional printer located under the table * Power and connection cables shown in the pictures Application Godpoz Si S Dofx Ag Souh The device is intended for use in: * CNC machining centers * CNC milling and turning machines * Tool rooms * Precision manufacturing plants * Automotive and aerospace industries * Tool preparation and quality control departments Technical condition The device is used, manufactured in 2020, and is in good visual condition. The device has a calibration mark dated 29.08.2024, valid until 29.08.2025. The set is equipped with a dedicated computer panel and measuring accessories. Inspection and testing of the device are possible by prior arrangement.

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Guodpfx Asz Ixkxeg Sjh Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Drive: 3 kW Roughing spindle Finishing spindle Locking arm Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: good (used), Year of construction: 2020, functionality: fully functional, The conveyor unit from Koch is for sale; 7 units are available. The price is per unit. Supply voltage: 230V Power: 0.65 kW Weight: 3.4 kg Conveyor connection: NW -30mm Gusdpfxjz Nxfas Ag Sjh Minimum air pressure: 4 bar

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Gsdozphdtspfx Ag Seuh Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum lifter from Schmalz for handling flat materials with a suction cup. Maximum lifting capacity: 125 kg. Gedpfxoz Nplks Ag Ssuh Schmalz model: MOD-VM-BASIC-125/250, BB-VM-BASIC-600-HI Adjustable suction cup, maximum dimensions: 1600 x 750 mm Suction cup diameter: 220 mm Vacuum pump: EVE-TR 4 AC 3 Operating lever Mounted on a stand with 4 wheels.

Condition: ready for operation (used), functionality: fully functional, Description: A complete compression testing station, consisting of a 20T hydraulic press from RYS and a professional measuring system from AXIS, including a ZEMIC strain gauge. The equipment comes from a SHILOH production plant that is being decommissioned in Bielsko-Biała. It was used for force insertion tests, strength tests, and quality control. The set includes: RYS FR-5019 hydraulic press – 20T AXIS force meter – PEAK, PRINT functions, units in kg/N/lbs ZEMIC load cell (strain gauge) – range 2000 kg Blocks, fixtures, and tools as shown in the pictures Analog pressure gauge Hydraulics and hoses Godjz Rvywjpfx Ag Ssuh Table height adjustment on bolts Applications: Force insertion tests Laboratory testing Quality control and R&D Assembly and disassembly of components Design workshop / toolroom

Condition: used, Year of construction: 2010, RINALDI NANOMATIC 380 S copy router, designed for milling, drilling and contouring operations on aluminium, steel and PVC profiles. The machine is equipped with an ISAC control panel, pneumatic profile clamping, side supports for long workpieces and an adjustable material-positioning system. CE marked. Manufacturer: RINALDI – Fratelli Rinaldi S.r.l. Model: NANOMATIC 380 S Year of manufacture: 2010 Technical specifications • Installed power: 3 kW • Tool speed: 1,000–13,000 rpm • X-axis travel: 360 mm • Y-axis travel: 145 mm • Z-axis travel: 140 mm • Spindle-to-table distance: 45–185 mm • Clamping capacity at 0°: 140 × 105 mm • Maximum tool-holder collet diameter: 10 mm • Operating pressure: 6–7 bar • Air consumption: 20 Nl/min • Suitable materials: aluminium, steel and PVC Electrical specifications • Voltage: 400 V • Phases: 3 + N • Frequency: 50 Hz • Current: 7.5 A Dimensions and weight • Machine dimensions: 1,700 × 950 × 1,550 mm • Dimensions with side supports: 5,000 × 950 × 1,550 mm Godpsz Rvdvjfx Ag Ssuh • Weight: 400 kg Ideal for window and door manufacturers and companies specialising in the professional machining of aluminium, steel and PVC profiles.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Gsdpfxozz Aqle Ag Ssuh Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation, we can ship the machine to your address.

Year of construction: 2004, condition: used, functionality: fully functional, For sale: Peripheral equipment for plastic injection molding. The grinders, mills, and temperature control units were in operation until 03/2026 and have been replaced by a new machine park. 3 units Wanner grinders, Compact series C17.26, year of manufacture 2006 2 units Kurtz grinders, SR 173, year of manufacture 2002 9 units Kurtz K-mills, SR 171, year of manufacture 2003 Gjdpfsz Hvgbex Ag Souh 10 units Wieser mills, WG-SR 170/110, year of manufacture 2003 1 unit Colortronic M102L sprue grinder, year of manufacture 2006 20 units HB-Term temperature control units, HB-CW 90, year of manufacture 1999 1 unit Wittmann temperature control unit, Tempro 1 TP 140, TS001537/001, year of manufacture 2000 1 unit Wittmann temperature control unit, Tempro basic 140, TS002073/001, year of manufacture 2000 3 units Wittmann temperature control unit, Tempro 2, year of manufacture 2000 Conveyor belts as shown in the picture Operating manuals available Complete purchase of all items preferred; individual purchase possible by agreement.

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings Gusdpez Slmwofx Ag Seh • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a leak testing device from the brand JW Froehlich in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: JW Froehlich • Model: MPS-200 • Testing method: Relative pressure measurement. Optional measurement methods: pressure drop, pressure increase, overpressure, underpressure. • Testing pressure range: approx. -0.8 to 6 bar • 6.5" color monitor with touchscreen and Windows operating system • Year of manufacture: 2014 • Documentation: Leak testing seminar • Condition: Used, functional Shipping costs via freight forwarder: approx. €90 If interested, a leak calibrator LK-20 is also available! International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from the location 42855 Remscheid, free on board. Gjdpoz I Db Aofx Ag Seuh Errors in technical data and prior sale are reserved.

Condition: excellent (used), Model: 4M/65E Condition: Very good Godpfxexz Tfao Ag Sjuh Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: used, Year of construction: 2024, Fluke DSX 8000 in good condition. Gusdpfxez I Sxpe Ag Sjh

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Gusdpfx Agez Slkps Seh