Used Copy Frame for sale (9,286)

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Kedpfxoh Uhqyj Aabjdu Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: new, Year of construction: 2023, Pressing area: 3000 mm x 1800 mm Number of manual hydraulic cylinders vertical: 4 Kedpfx Ajiwfhwoabodu Number of manual hydraulic cylinders horizontal: 2 Press pressure: 1500 kg Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 130598, Automatic frame press TYPE FS Press for gluing frames, windows, doors and similar parts. Kdjdpfet Du Sajx Aabsu Year of manufacture 1996 Hydraulics 0-100 bar Pneumatics 0-10 bar Working voltage 380V/50Hz Power 7.5 kW

Condition: ready for operation (used), Table dimensions X/Y: 750mm/750mm, table height adjustment: 100mm, throat depth: 600mm, milling spindle stroke: 140mm, spindle swivel: +/-90°, machine dimensions X/Y/Z: approx. 750mm/1050mm/1600mm, weight: approx. 450kg. An on-site inspection is possible. Kdjdpfx Aew U T Uisabeu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 2,131 h, load capacity: 9,000 kg, lifting height: 3,000 mm, fuel type: gas, construction height: 2,480 mm, motor model: Gas, fork length: 1,650 mm, fork width: 300 mm, overall weight: 17,000 kg, total length: 4,725 mm, total width: 1,550 mm, Equipment: hydraulics, 1 used 9-ton forklift with LPG drive, by Paus, equipped with hydraulic fork positioner and pivoting mast with telescopic boom. ----- Technical data and parts list: see handout. Without packaging; any warranty rights are excluded. Kdedpfx Ajw U Sltjabou If you wish to dismantle the unit yourself, please include this information in your bid. We do not guarantee the accuracy of the technical data, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements listed in accident prevention regulations.

Condition: good (used), 21-26- Hydraulic press KALLESOE (used) Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania) Kodeuctlnspfx Aabedu

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Ksdpfx Aajh U Dtusbjdu Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Kdsdpstqwtdsfx Aabeu Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: new, Year of construction: 2026, functionality: fully functional, on stock! The GAP 100 automatic profile sharpening machine sharpens your gang saws and features a compact, extremely stable design, high functionality and excellent value for money. Highlights Hydro pneumatic return stroke of saw carriage Pneumatic saw blade clamping Precision linear guide for saw carriage Precision spindle height adjustment for saw blade width Fully enclosed protection hood with powerful water-cooling Kdodpfog Uzl Eex Aabeu Feed speed regulator with frequency converter Grinding wheel dressing device Dust mist exhaust Lever control for 3 different tooth shapes Continuous tooth pitch adjustment Speed regulator for grinding wheel Optical signaling device for process status recognition (3-color signal lamp)

Condition: excellent (used), Frame Joiner ALFAMACCHINE ALFA 3 Kjdpfowutf Aox Aabodu Strip width: 6–60 mm Strip height: 6–80 mm Distance between staples up to 80 mm "V"-type staples Operating pressure: 5–7 bar

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Ksdpfxsdwf Dbs Aabjdu

Condition: ready for operation (used), functionality: fully functional, mileage: 6,50,000 km, power: 110.32 kW (149.99 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, overall weight: 7,500 kg, loading space width: 4,000 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, truck registration, Overhauled vehicle, technically very well maintained; requires 2 new batteries. Suitable for small jobs, short wheelbase, beverage transport. Drop-side body with adjustable tarpaulin frame. Kdodpfx Aaew Rq Ekobju

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Ksdpfxjv Tp D To Aabedu Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Year of construction: 2001, condition: ready for operation (used), Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air. Kjdpfxopy Eufj Aabsdu

Year of construction: 1999, condition: ready for operation (used), Copying range U/V: 1400mm/1060mm, table longitudinal movement U: 1500mm, column transverse movement V: 1060mm, headstock vertical movement W: 900mm, max. spindle-table distance: 1025mm, probe adjustment range X/Y/Z: 300mm/150mm/250mm, probe mounting swivel range: +/- 15°, speed: 4000rpm. Including documentation, headstock and spindle. Ksdpjh Tkn Njfx Aabedu

Condition: ready for operation (used), A package with a Brückner stenter frame and additional elements is available: 1) Brückner stenter frame SPR 2, 2) Goller washing machine, 3) ECO-Heat exhaust air purification system for Brückner stenter frame, 4) Foulard with Küsters control unit and hydraulic unit, 5) Pleva SL 2.1 entry straightening unit, 6) RS Scheuchl heat recovery system, 7) Pleva SL 2P exit straightening unit. An on-site inspection is possible. Kodpfsw R U Amex Aabsdu

Year of construction: 2007, condition: ready for operation (used), Saw blade diameter: 400mm, cutting angle: 45°/90°, speed: 2800rpm, motor type: E63S-B3, material range: aluminium/plastic. Documentation available. An on-site inspection is possible. Ksdow R Uy Sspfx Aabsdu

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Kdedpfx Aewd Taleabju

Year of construction: 2016, condition: ready for operation (used), Compressed air supply: 6bar, connected load: 2.7kW, weight: 450kg with documentation and Single-Head Welding Machine Rottler und Rüdiger Roweldo S X7, year of construction: 2016, an inspection is possible. Kdjdpfjgfbqnsx Aabeu

Year of construction: 1983, condition: ready for operation (used), Was used to rework profile rollers for a hot rolling mill, was regularly serviced, with accessories, without spare parts, on-site inspection is possible, no videos available. Kjdpsriwfijfx Aabodu

Condition: ready for operation (used), Year of construction: 2003, Drying type: direct heating with natural gas, working width: 700-1800m, working speed: 3-60m/min, number of drying fields: 5, drying zone length: 15, temperature range: 50-210°C, max. firing heat output: 5x 230kW, processes: appretieren, connected load: 130kW, total length: approx. 25,000mm. Heating control defective (frequency converter), edge cut is not included. On-site inspection is possible. Kdodswcyw Ijpfx Aabsu

Condition: ready for operation (used), Year of construction: 1986, A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible. Ksdpjwhy S Nofx Aabodu

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Kodpfxewu Ez No Aabodu

Year of construction: 1996, condition: ready for operation (used), Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg. Kodpfotxbzxsx Aabsdu

Condition: ready for operation (used), Year of construction: 1986, Working width: 2400mm, Torch: Manufacturer: Maxon, Type: Valupak MF 300, Year of manufacture: early 2000s, Overall dimensions X/Y/Z: approx. 43m/6m/5.5m, Operating hours: 76761h, Control system: Monforts Matex-Color. Including Zimmer coating system and pre-drying system. Documentation available. On-site inspection is possible. Kdedpfx Aajt H Rdkjbou