Frame press

Hess Express

Condition: used, Year of construction: 1993, used, in excellent condition Brand: Hess Model: Express Year of manufacture: 1993 Machine no.: 100914/28 Cylinders per press element: 2 - 110 mm stroke Credpjxuv N Usfx Addsk Number of press elements horizontal: 3 Number of press elements vertical: 3 Working width: 2500 mm Working height: 1350 mm Press depth: 600 mm Pneumatic Height adjustment: electric Space requirement approx. 3600 x 800 x 2450 mm Weight approx. 1200 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg Csdpfexgpaqox Addsrk

Condition: excellent (used), HESS EXPRESS Corpus Press, S/N 100954/32/1994, Year 1994 – Ref. No. 105123 Working Range: Width min. 250 – max. 2500 mm Height min. 250 – max. 1350 mm Depth max. 600 mm Installation Dimensions: Width 3580 mm x Height 2375 mm x Depth 790 mm - Central motorized height adjustment via push button - Automatic locking via trapezoidal spindle - Manual width adjustment via ball bearing slide carriage - Slide carriage with pneumatic central locking (3-position lock) - HESS hole grid system with 50 mm spacing - Continuous support bed as complete counter bearing - All pressing units with 2 pressure cylinders each - Central height adjustment of all vertical pressing units via pressure beam - Separate control of vertical and horizontal pressing units via one hand control valve each - Pressure adjustment from 4–10 bar according to diagram - Height adjustment using mm scale - Width adjustment using 50 mm scale - 4x vertical and 2x horizontal pressing units, each with 2 pressure cylinders, 1000 kp (approx. 10,000 N) pressing force per unit at 10 bar, 110 mm stroke, horizontal pressing units with quick couplers - Electrical connection: 0.55 kW, 380 Volt, 3/N, 50 Hz - Pneumatic connection: R 3/8", max. 10 bar Pressing units combined into pressing corners, left pressing corner consists of pressing unit and counter bearing, mechanically guided during height adjustment and always in position; right pressing corner consists of vertical and horizontal pressing units, can be positioned differently on both axes within the combined corner using guide rails, lower horizontal pressing unit height-adjustable; all pressing components are interchangeable. Condition: See attached photos, technically in excellent condition Payment: Net cash before loading Delivery time: Short-term, by arrangement Delivery: EXW Inspection: Possible at any time by prior appointment Subject to prior sale and errors. Csdewvqp Ijpfx Addsrk

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Codpfxod Exwgj Addjrk Number of drilling spindles 1 Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8 Crjdpokw H Ekjfx Addek

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Credew Dc Nispfx Addsk Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: good (used), Year of construction: 2002, operating hours: 5,900 h, functionality: fully functional, machine/vehicle number: 74343, working width: 1,350 mm, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, Bütfering Optimat SBC 313 wide belt sander, already dismantled and stored on site Wide belt sander Year of manufacture: 2002 Crsdpfx Asqvl D Hoddsk Model: Optimat SBC 313/QCE/Classic - with 3 units (description available in the photo) - top sanding Working width: 1350 mm Abrasive belt width: 1370 mm Abrasive belt length: 2620 mm Cross belt width: 150 mm Cross belt length: 4700 mm Further details can be found in the photos

Condition: new, Year of construction: 2024, planing width: 630 mm, TECHNICAL DATA Planing width 630 mm Crsdpfx Adeqffvgedok Feed table length 1620 mm Feed table length 1170 mm Total table length 2850 mm Cutterblock speed 5000 rpm Extraction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 1400 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Electromotive adjustment of the feed table via push-button Hollow and pointed joint adjustment on the feed table Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested

Condition: used, Year of construction: 1991, Cutting length 3100 mm Credpjr I E Hcefx Addjk Cutting height 45 mm Motor output 1,8 kW dimensions 4000 x 500 x 920 mm weight 450 kg

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Edge sanding machine with integrated dual conveyor feed system for solid wood parts, veneered edges, and curves, featuring oscillation of the entire sanding unit. Processing of solid and veneered edges either manually or with automatic feeding: - On the veneer sanding side, along the two stop plates (with infeed stop including integrated extraction slots and fine adjustment according to removal scale) onto the elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two deflection rollers), with infeed stop extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid wood sanding side against the continuous, glide-backed sanding belt support, table size 1180 x 325 mm including miter fence with scale. - On the front side with an optionally quick-mountable semicircular table (with dust extraction holes) against the rubberized belt drive roller Ø 90 mm, support radius 300 mm. - On the drive roller, optionally with a quickly mountable auxiliary cast iron table (with dust extraction holes) 400 x 500 mm on an oscillating spindle for use of sanding drums Ø 25, 30, 40 and 45 x 100 mm for external and internal curves, with spindle safety cover. Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented construction), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, oscillation stroke programmable from 10 - 90 mm, control box integrated in frame, constant belt tension with length compensation, belt tracking adjustable, safety guard, dust extraction via two extraction hoods, flexible hoses and common internal pipe to 150 mm connection, recess in frame for easy transport with pallet or forklift, belt width 150 - 200 mm, belt length 2000 mm, working height 830 mm (solid sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the frame, two parallel transport belts 50 mm wide, spaced 250 mm apart on the underside, 20 mm wide top pressure rollers, 0.55 kW (0.75 HP) motor, continuously adjustable speed 3 - 15 m/min. Cedpew Tfx Dofx Addork COMFORT version Kündig UNIQ-S Including table extension UNIQ/UNIQ-S/Flash Including upper extraction duct UNIQ without slide Including semicircular table for belt drive roller UNIQ-S Availability: short-term Location: Flörsheim