Used Copy Shaper for sale (755)

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Fpsdpfsz E A T Eox Ap Djn Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Fodpfxexxmf Ie Ap Depn Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 20-14446, wheel width: 1,000 mm, stroke length: 200 mm, Gear shaper with cutter – module 10 – max. diameter 1000 mm – vertical rise 250 mm – stroke 200 mm – equipped with two additional tables of 850 mm and 1500 mm diameter – many accessories and programs for 1-2-3-4 cycles and for spiral cutting. Fpsdpfxoybaz No Ap Djn

Condition: used, Year of construction: 2008, total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, Colour: White Fpsdpfx Aoych Elep Djn Empty weight: 750 kg Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 108/1008-3 - Main motor power [kW]: 4.0 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Milling machine, copy router in very good working condition. Fpjdpfjx Rrtdox Ap Djn

Year of construction: 2012, condition: excellent (used), functionality: fully functional, - Power (kW): KFB 353 = 1.5 - Voltage (V): 400 - Air pressure (bar): 7 - Air consumption (l/min): min. 250 Fpsdpfewzivdjx Ap Djn - Revolution shaft (min-1): KFB 353 = 12,000 - Maximum cross section of the workpiece WxH(mm):190x111 - Milling range L x W (mm): 300 x 130 - Milling depth (mm): 200 - Machine dimensions L x D x H (mm): 3,500 x 820 x 1,650 Dpro2J - Weight (kg): approx. 420 - Workable material: KFB 353 = PVC and aluminum profiles

Condition: excellent (used), functionality: fully functional, Gear shaper Tos OHA50A v, No. 0440253 In very good condition, rated 9/10. Fpjdjzxnuwopfx Ap Den

Condition: like new (used), number 1 Stück LORENZ disc cutting wheel HM: HB10 - F Z2/Z0= 15/60 14 - 44C 46 711/1 Fsdpezupl Asfx Ap Dopn mn3.08 an21° z60

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm Fodpfxsxwl Tzj Ap Depn - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: used, Second-hand HAPFO AP 5000/ME copy lathe for professional use in woodworking. The machine is designed for copy turning of workpieces and is suitable for typical turning and shaping work on wood. Fpodpfx Apozrx Sae Don Technical data: - Centre-to-centre distance: 1,300 mm - Centre height: 250 mm - Motor: 1.4 kW

Condition: new, – 2 manually operated clamping devices – Idle speed: 11,000 rpm – Minimum quantity lubrication system Fjdpfoz E U Uhsx Ap Dopn – Material stop – Documentation – 230 V

Condition: new, Equipment: documentation/manual, – 2 pneumatic clamping devices – Ø 5 mm cutter Fpjdpez D Syfjfx Ap Den – DC motor – No-load speed: 23,000 rpm – Minimum quantity lubrication system – Material stop – Compressed air gun – Documentation – 230 V

Condition: new, – 2 pneumatic clamping devices – Idle speed 11,000 rpm – Mist lubrication system – Material stop Fodpoz Egkzofx Ap Depn – Blow gun – Documentation – 230V

Year of construction: 1997, condition: used, SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L Fsdshz Dlbepfx Ap Dspn - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - S/N 73 - CE rules (year 1997)

Condition: used, Year of construction: 1994, functionality: fully functional, turning diameter: 170 mm, SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI TYPE T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle Fpsdpex Rw Iyofx Ap Don - Year 1994

Condition: used, Year of construction: 2000, functionality: fully functional, turning diameter: 170 mm, turning length: 1,250 mm, number of spindles: 4, Equipment: cabin, SECOND-HAND COPYING LATHE BACCI T4MO - 4 holders for simultaneaus milling Fpedpfx Aox Rx D Nsp Don - Total weight 1.500 kg - Incl. soundproof cabin and extraction - Sanding belts: 4 - Band height: 180 mm - Contact roller Ø: 80 mm - Max. batten length: 1.250 mm - Milling machines standart power: 11kw

Condition: like new (used), number 1 Stück LIEBHERR/LORENZ disc cutting wheel Modul 4 - EW 30° - Zähne 12 - DIN 5480 - new Fsdpezupmaofx Ap Dspn

Year of construction: 2006, condition: used, We are selling a PVC production line consisting of the following equipment: ROTOX: ZGS314 - double-head miter saw AS1960 - automatic reinforcement screwing machine Fpedpfoz Hw Erox Ap Dsn FWS381 - automatic three-spindle water slot/drain slot milling machine SAF166 - automatic/pneumatic end milling machine KF349 - four-spindle copy router SZK502 - double-head welding machine EPA470 - corner cleaning machine FMS643 - sash assembly station SEK701 - single-head automatic welding machine LA396 - electronic length stop system GLA403 - glazing bead saw, simultaneous cutting of two PVC window frame glazing beads at a exact 45-degree angle BLACKSEA TS3067 - triple-spindle water slot (drainage) milling machine

Year of construction: 2022, condition: good (used), Year of manufacture: 2022 Serial number: 3849016657 Reference: 431030-9040-000 Previously serviced/supplied by Mikroskop-Center.de, Germany The system is in very good cosmetic condition and has been set up and tested for digital imaging. The Axiocam 305 Color camera is recognized by ZEISS ZEN software and live imaging is functional, as shown in the pictures. The microscope is configured for both transmitted light and fluorescence applications and is suitable for cell culture, biological research, routine microscopy, and fluorescence imaging. Configuration includes: - ZEISS Axio Vert.A1 inverted microscope - ZEISS Axiocam 305 Color digital camera - Fluorescence illumination module - Fluorescence filter positions: Fpsdpfx Aoz Eztdsp Den - DAPI - GFP - Cy3 - BF / Brightfield - ZEISS LD A-Plan 5x / 0.15 Ph1 - ZEISS LD A-Plan 10x / 0.25 Ph1 - ZEISS LD A-Plan 20x / 0.35 Ph1 - ZEISS LD A-Plan 40x / 0.55 Ph1 - Phase contrast system - Mechanical specimen stage - Binocular observation head - Lenovo ThinkPad laptop - ZEISS ZEN 3.14 / ZEN Lite installed - Camera connection cable - ZEISS accessories and documentation shown in the pictures

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel KF 3 S type Copy Milling Machine Very good condition Fedev E Rw Sepfx Ap Djpn

Year of construction: 2010, condition: excellent (used), ALUMA PANTO 10 MILLING AND COPIING MACHINE Fodpfx Apspag Ins Djpn MILLING AND COPIING MACHINE ALUMA PANTO 10 YEAR 2006 MILLING AND COPIING MACHINE ALUMA PANTO 10 YEAR 2006 PANTOGRAF TWO-AXIS x AND y MILLING MACHINE FOR MILLING FOR ALUMINUM DOOR HANDLES AND HINGES

Year of construction: 2019, condition: used, functionality: fully functional, overall weight: 5,425 kg, machine/vehicle number: 3037, Scodix Ultra 202 – Refurbished Counter reading: Foil copies: 1,731,153 Total copies: 3,459,082 Specifications: Power supply: 400 VAC, 3P+N+PE; 63A x3; 50/60 Hz; SCCR: 10kA Made in Israel Year of manufacture: 12/2019 Weight: 5,425 kg Dimensions: 7880 x 1790 x 1979 mm Foil roll width: 50-500 mm Maximum foil roll diameter: 30 cm Fpjdpez Imi Nsfx Ap Djn Number of rolls that can be used simultaneously: 4 Layer thickness: 5 - 250 microns Maximum layer thickness: 700 microns Basis weight: 135-675 g/m² Resolution: 2540 x 450 dpi Maximum format: 545 x 788 mm Minimum format: 297 x 420 mm Maximum image area: 748 x 504 mm The machine is fully functional. The machine is available in Essen. Transport can be negotiated individually.

Condition: used, Year of construction: 1995, functionality: fully functional, Comec FT-CD-CA-650 end-milling machine Fjdpfx Aoz D H Ecop Dopn Number of milling heads per side: 1 Length of workpieces: approximately max/min 650-220mm Automatic material feeding from a feeder Operation based on templates

Condition: new, – 2 manually operated clamps – Ø 5 mm cutter – DC motor – No-load speed 23,000 rpm – Material stop Fpjdpfx Apsz E Dczs Den – Documentation – 230V

Year of construction: 2004, condition: used, Speed: 12,000 revolutions per minute Pneumatic material clamping via foot switch Minimum quantity spray device Milling area: 300 x 120 mm Hub: 115 mm Fedpezyapcjfx Ap Depn Weight: approx. 200 kg