Used Corner Crimper for sale (2,673)

Condition: good (used), Year of construction: 2016, operating hours: 16,977 h, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 50 mm, feed rate X-axis: 18 m/min, edge thickness (max.): 3 mm, total length: 6,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 2 glue tanks + 1 glue tank for spare parts Ncjdpfx Aoxxy Rkjdwjl

Condition: used, Year of construction: 2002, functionality: fully functional, HOMAG Optimat KL79 A20/S2 (2002) – Full Configuration The edge banding line is in satisfactory working condition, fully operational and ready for production. Installed Units: • A20/S2 gluing station (edge thickness up to 20 mm) Ncjdpfx Adeycg D Tswel • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz • Compressed air: 8 bar

Condition: excellent (used), functionality: fully functional, mileage: 38,503 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 2,535 kg, maximum load weight: 965 kg, first registration: 11/2020, next inspection (TÜV): 09/2026, emission class: euro6, color: silver, number of seats: 3, number of previous owners: 1, machine/vehicle number: SLS8400, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, tail-lift, truck registration, 229L Stuttgart 9775 Paint colour Iridium Silver MB 9775 A50 Front axle with increased load capacity AI1 Control code rear axle, crown gear 215 AR2 Axle ratio I = 3.923 BH6 Control code hydro aggregate variant 5 BK1 Control code wheel brake configuration 1 C6L Multifunction steering wheel C907 SERIES 907 TRANSPORTER VS30 CB8 Stabilisation Level II CL1 Steering wheel adjustable in tilt and height CW2 Omission of vehicle lowering D03 High roof D50 Continuous partition E1D Digital radio (DAB) E1E Navigation E1G Live Traffic capability E1U USB socket 5 V E2I Auxiliary battery for retrofit consumers, interior E2N Control Pro-Features in NTG6 E36 Separation relay for additional battery E3J Pre-installation switch panel E3M MBUX multimedia system with 7-inch touchscreen F3F Passenger-optimized shift console F68 Heated and electrically adjustable exterior mirrors F907 SERIES 907 TRANSPORTER VS30 FKA Panel van FR8 Reversing camera GD8 6-speed manual transmission ECO Gear H20 All-round heat-insulating glass HH9 Semi-automatic climate control Tempmatic HI1 Climate zone 1 (cold/comfort) IC1 Series C907/C910 Sprinter IE0 Series C907 VS30 RWD IG4 Standard IL5 Left-hand drive IL6 Metallic paint IR4 Wheelbase 3665 mm (BM-forming code) IT4 3.5 tonner J10 Tachometer km/h J58 Belt warning system for driver's seat J65 Outside temperature display JA8 Crosswind Assist JG0 Gearshift indicator JH3 Communication module (LTE) for digital services JI7 Initial running distance maintenance interval 60,000 km K13 Main tank 71 litres KP6 Emission control SCR Generation 3 LA2 Headlamp assistant LB5 Third brake light LC2 LED light strip in load compartment M40 Alternator 14V/200A MI2 Engine OM651 DE 22 LA 105 kW (143 hp) MJ8 ECO start/stop function MP6 Engine version Euro VI MQ0 OBD (On-board diagnostics) Level D OH2 HU Freshup 2 PH1 Master code tail lift Bär Cargolift Q11 Longitudinal member reinforcement RH2 Tyres 235/65 R16 C RX5 Wheel brand Maxion Wheels S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S23 Dual passenger seat SA5 Driver airbag SB1 Comfort driver's seat SK2 Seat occupancy detection driver's seat T16 Sliding door right T77 Grab handle, load compartment sliding door at partition T86 Grab handle on rear right corner pillar V42 Lashing rails side wall at belt rail V43 Wooden floor V85 Smoker package V94 Cable duct on side wall V95 Cable duct at rear portal VA2 Interior panelling load compartment to roof height (wood) VF7 Fabric Maturin black W54 Rear doors, twin-leaf, 270 degrees XG7 Without uprating/downrating 3500 kg XM1 Noise reduction XM4 Acoustic package XV1 Reference weight at least 2381 kg required YK4 Tie-down straps for lashing rails Z1N Approval N1 Z2E Country version EU-EFTA-UK Z4V Production Düsseldorf Z7K Fleet Comfort Package Z7L Fleet Load Compartment Package ZM0 Panel van Njdsyabykopfx Adwjcl

Condition: new, Year of construction: 2026, functionality: fully functional, Edge banding machine – NB860EC - Machine with 6 edge band magazines and servo feed • Robust machine structure and most of the machine's mechanical parts are machined with advanced CNC machines for greater stability and longer life without deformation; • Combines multiple functions in one machine, including pre-milling, pre-heating, pre-melting, end trimming, servo fine cutting, servo scraping, surface scraping and polishing, spraying, all in one process. • Intelligent PC control, feed guide, belt pressing rollers, fine cutting and scraping are controlled by a servo motor. Corner rounding is adjusted pneumatically. Machine speed 16/20/24 m/min; • Nesting kit design • Fine refilling and corner rounding via HSK25 TECHNICAL DATA Panel length: ≥120 mm; ≥200 mm with rounded corners Panel width: ≥60 mm Min. Panel size: 120× 120mm; 120× 60mm long edge; 200*80 mm short edge Panel thickness: 9-60 mm Thickness C=edge: 0.4-3 mm Feed speed: 16/20/24 m/min Power supply: 380 V; 50 Hz Required air pressure: 0.7 MPa Distance between panels ≥50 Console 2 Dust collection outlet Φ 125 mm*5 Total power: 28 Kw Approximate weight: 3,000 kg Overall dimensions: 5,930*1,050*1,850 mm 6-sided drilling CNC and double workstation ND712DTL The ND712D is designed to have 2 independent workstations of 1200+650 mm, integrating 2 machines into one, thus doubling efficiency with less space required. The integrated, high-rigidity machine body structure gives the entire machine a longer service life and fast, stable machining. The optimized drill layout makes drilling more efficient. TECHNICAL DATA Total power: 52.36 kW Machine size: 7400 * 4,620 * 2,650 mm Power supply: 380V/50Hz 3 phases Air supply: 0.6-0.7MPa Total weight: 7,850 kg Control system: SYNTEC Panel size: Length: 250-2,800 mm / Width: 250-650/1200 mm / Thickness 10-60 mm Maximum travel speed: ( X) Axis /U ) - 135 m/min Y axis - 75 m/min Z axis - 30 m/min Transmission mode X axis - Rack and pinion Y axis - Rack and pinion Z axis - Ball screw Drilling blocks: Top 2+2; Bottom 1+1 Vertical drills (top): 19*4 Horizontal drills (top): X: 3 × 8 + Y: 2 × 8 Vertical drills (bottom): 9 × 2 Maximum drilling diameter: Φ35mm Distance between holes: 32 mm Rotation speed: 5000 rpm Shank diameter: Φ10mm Ncodpfx Aex Uplxsdwsl Main shaft: 4* ER25 Power: 2*3.5kw; 2*5.5kw max. 18000rpm

Year of construction: 2019, condition: used, Please contact ATS Norway for more information Ncsdpfx Asyaxpcedwel Please provide reference number upon request: 22169 Living area equipment: Table with 4 chairs Refrigerator Stove Microwave oven Kitchen counter with sink Upper and lower cabinets Panel heater, 2000 W Bathroom equipment: Shower corner with curtain Washbasin Toilet Water heater Mirror cabinet Panel heater Bedrooms (2 units): 2 wardrobes Bunk bed with mattresses Panel heater Additional equipment: 25 m power cable, 230 V – 16 A, 3-phase (alternatively 400 V) 25 m ¾" water hose 25 m 1" drainage hose 1 hot-dip galvanized staircase There is also an option to purchase a similar unit from 2023.

Condition: new, Catalogue No.: HZ014 – Pre-milling – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Ncodpfxox S Iypo Adwol Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Nsdsyamcwopfx Adwocl Equipment and technical data: Machine with PLC control Feed speed: 12/16 m/min Edge feed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Milling unit, fixed up to 30 mm 1962 Milling unit MOT 5 with multifunctional flush, radius, bevel 1966 Radius scraper 1927 Corner copying 1983 Surface scraper 1964 Buffing unit 1944 Air blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Edging thickness max.: 13 mm Weight: 1,350 kg Machine dimensions: 5,850 x 1,000 x 1,750 mm Location: Röllbach Availability: short-term

Condition: used, machine/vehicle number: 007358, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Ncodpfx Aewlpl Tjdwol Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, mileage: 32 km, power: 100 kW (135.96 HP), first registration: 08/2025, fuel type: diesel, overall weight: 3,225 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 9, total width: 2,275 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 74852---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Windows: Side windows, 2nd row, fixed, right and left including sliding door right and left * Heated rear window, fixed - Interior mirror - Partition with window * Radio: Ford audio system with 13 inch multifunction display and Ford SYNC 4 including navigation - DAB/DAB+ - 13 inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Limited-slip differential, mechanical * Auxiliary heating (fuel-water heating) with remote control including H7 AGM double battery * MTW conversion: RAUWERS PHOENIX SOLARIS special signal bar - electronic siren city/country - Control unit for the special signal system on the center console - Antenna for digital radio - Third beacon at the rear - Schnierle individual seats OTHER EQUIPMENT * 2-stage unlocking for passenger compartment and cargo area (rear door flaps or rear swing door) * Airbag (passenger side) * Airbag driver side * Anti-lock braking system with electronic brake force distribution * Outside mirror housing in vehicle color * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g. B. remaining range) and outside temperature display * Roof console * Double-wing rear door with 180° opening angle (without window) * ESP - hill start assist - safety brake assist - traction control * Electric front windows - with quick-up/down switch for driver and front passenger * Electronic parking brake * Ford Key Free system - including Ford Power start function * FordPass Connect - including live traffic information and WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Floor mats: rubber floor mats at the front * Grab handle, driver and front passenger side * Lockable glove compartment with lid * Interior lighting at the front with delay switch * Automatic air conditioning at the front - with recirculation heating - with R-1234yf coolant Nodpfx Aex Txtijdwjcl * Front headrests * 55 l fuel tank * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED indicators at the front - cornering light, static - high beam assistant * Cargo area lighting (LED) - extra bright * Cargo area floor: vinyl floor covering "Easy Clean" * Steering wheel, Sensico in leather look * Center console, small * Emergency call assistant eCall * Package: Technology package 2 (Limited) - Exterior mirrors with integrated indicators, electrically adjustable, heated and automatically foldable - Audio system 13?? Multifunction display and Ford SYNC - Pre-Collision Assist, camera-based - Fatigue warning - Traffic sign recognition system - Wrong-way driver warning function - Lane assist including lane keeping assist - Parking pilot system front/rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particle filter: Diesel particle filter * Radio accessories: 4 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: Light alloy wheels 6.5 J x 16, 10-spoke design - with 215/65 R 16 tires * Windscreen wiper with rain sensor * Sliding door right * Mud flap rear * Mud flap front * High side paneling * Power steering * Seat belts - Seat belt tensioner and belt force limiter front - Warning system for driver's seat belt not fastened * Seats: Seat package 46 - driver's seat,

Condition: new, Clamp length , mm Clamp width , mm 0 , Nm Painting aid for painting the sash and glazing bead frame at the same time RU-LH painting aid for glazing bead frames for processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At the 4 corners 1 bracket is placed on each of the glazing bead frames. The positioning is done diagonally and in such a way that the brackets protrude approx. 35 mm from the wood, When pressed into the sash frame, a clamping. The glazing bead frame is ready for painting Positioned at a distance of approx. 20 mm in front of the sash. After drying or before installing the sash the glazing bead frame is flush with the sash pressed and only removed again before glazing. The clamps can then be pulled out again by hand become. Stand frame with support table vertical 85°, adjustable in inclination. 2 pieces compensation frames for different glazing bead thicknesses, operation via foot valve. Price on request plus packaging and shipping Nodpsxpi Efjfx Adwocl Option with extra charge: Package of brackets 26 x 50 mm, 4,300 pieces each EUR 77.00 You can find recordings of the painting aid at the end of the video below! (technical information according to manufacturer - no guarantee!)

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table Nodpfovnh T Nsx Adwscl height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 1.321,00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 22.00 euros 12 mm brackets (package of 3000 pieces): Price 32.00 euros 10 mm staples (package of 3000 pieces): Price 32.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: used, functionality: fully functional, mileage: 5,20,171 km, power: 331 kW (450.03 HP), first registration: 02/2021, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features BigSpace L-cab, Actros model generation 5, wheelbase 3850 mm Engine version Euro VI, D, 449 Hp,330kW (449hp),2200 Nm, Batteries 2 x 12 V/220 Ah, low-maintenance Mercedes PowerShift 3 Transmission, High Performance Engine Brake ADR type class AT Tank,820l+90l AdBlue,left,735x700x2170 alu.,step, Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Driver comfort Automatic climate control, Power windows, all-round Driver's suspension seat, comfort, Multifunction steering wheel Fold-up co-driver's seat, Armrests on both sides, co-driver's seat Smoker package Auxiliary hot water heater, cab Pull-out refrigerator, under bed Flexible shelving sys.,f. stowage above windscreen, Drawers, under bed, Drawer, under dash support Tilting sunroof, electric, Sunblind, side, driver's side, Sun visor, exterior, transparent Luxury bed, top, narrow, Luxury bed, bottom Technical specifications Continental VDO 4.1 smart tachograph Disc brakes on front and rear axle Electronic braking system with ABS and ASR, Stability Control Assist (ESP) Front spring, 7.5 t, 2-leaf Rear axle - air Tyres 315/70R22.5 Drive program fleet, Navigation system Fifth wheel coupling, standard, Jost JSK 37C Axle load measuring device Ncsdpfexyw Szjx Adwjl Heat insulation, additional Safety Cruise control Predictive Powertrain Control Lane Keeping Assist, Traffic Sign Assist Attention Assist Active Brake Assist 5 Technology Multimedia Cockpit, interactive, Preinstallation Mercedes-Benz Truck App Portal, Standard loudspeake Truck Data Center 7 FleetBoard Eco Support, Interface, fleet management system FMS Exterior Fully painted cab LED daytime running lamps, LED headlamps, Foglamps, halogen Headlamp cleaning system, Side marker lights, Ambient lighting Air deflectors, corner panels, Kerb mirror Front mirror, heated, MirrorCam, MirrorCam switch, on bed Locking system, with central locking, 2 remote control keys

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. Ncedpfewqcrqjx Adwol - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: used, Year of construction: 2020, total length: 6,000 mm, total height: 1,670 mm, total width: 1,410 mm, Weight: 2.200 kg Price: On request - Year: 2020 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20.082 Ncedpfxox Hfyij Adwol - Number of units [pcs]: 10 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Fine milling unit - - Tools available: Yes - └ 8th unit type: Corner rounding unit - - Tools available: Yes - └ 9th unit type: Radius scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Power [kW]: 16.2 - Transport dimensions: 6000mm x 1415mm x 1670mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total length: 5,200 mm, total height: 1,740 mm, total width: 1,500 mm, Weight: 970 kg - Year: 1998 - Documentation available: No - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Glue unit - - Tools available: Yes - └ 2nd unit type: Pressure rollers - └ 3rd unit type: Cap unit - - Tools available: Yes - └ 4th unit type: Rough milling unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes Nedpjx H Rivofx Adwjcl - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Transport dimensions: 5200mm x 1500mm x 1740mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, Machine includes: Pre-milling, pre-heating, pre-melting, pressing, fine trimming, end cutting, corner rounding, cutter scraping, flat scraping, buffing Heavy duty machine body and most mechanical machine parts are proceeded by advanced CNC Nodpfexd Ubbsx Adwecl machines for higher stability and longer service life without deforming; Merges numerous functions in one machine, including pre-milling, pre-heating, pre-melt gluing system, snipping, end trimming, fine trimming with servo, corner trimming, scraping with servo, surface scraping and buffing, sprayers, edge banding work can be done in one process. Intelligent PC control, infeed fence, tape pressing rollers, fine trimming and scraping are servo adjust. Corner rounding pneumatic adjust. Machine Speed 16/20/24m/min; Nesting kit design, pre-drilled nesting hole friendly Fine trimming and Corner rounding by HSK25

Condition: used, functionality: fully functional, mileage: 3,99,517 km, power: 346 kW (470.43 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with high roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e. Gearbox MAN TipMatic 12.26 DD. Advanced Emergency Brake Assist (EBA). Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Co-driver's seat, not sprung, length and backrest adjustment. Nodpeybayrofx Adwjcl Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2 fifth-wheel coupling. Main wheelbase, 3,900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Road speed limiter, adjustable, limiter (engine speed regulation). Technology MMT infotainment system, Advanced Basic. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed.

Condition: used, functionality: fully functional, mileage: 4,18,689 km, power: 346 kW (470.43 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with high roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e. Gearbox MAN TipMatic 12.26 DD. Advanced Emergency Brake Assist (EBA). Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Co-driver's seat, not sprung, length and backrest adjustment. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2 fifth-wheel coupling. Main wheelbase, 3,900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Road speed limiter, adjustable, limiter (engine speed regulation). Technology MMT infotainment system, Advanced Basic. MAN TeleMatics. Exterior Front headlights, LED. Ncjdpfeybaylox Adwsl Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PVC Çift Kafalı Üretim Makine Set, • Enables the production of 80 - 120 windows in an 8-hour working environment. • Our set offers fast production capability to customers with different machine options. • Available in 380 Volt or 220 Volt versions. • Compliant with CE (European) standards. • Door-to-door delivery prices to any destination worldwide. • References available from our previous customers in your country. MACHINE CONTENT • SC 400 Aluminum & PVC Double Head Cutting Machine (Ø500 mm saw option) Nedpfx Adorfyzfjwscl • SC 100 PVC Double Corner Welding Machine (0.2 mm welding capability) • SC 501 Aluminum & PVC Handle Slot Drilling, Channel Milling, and Water Drainage Machine • SC 301 Aluminum & PVC Bead Cutting Machine • SC 211 Aluminum & PVC Mullion Preparation Machine (2 blades) • SC 601 Automatic Corner Cleaning Machine You can increase your production capacity with different machine options. Please contact us for the catalogue.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: PVC TEK KAFALI ÜRETİM GRUBU, • Enables production of 40 - 60 windows in an 8-hour work environment • Our set, which offers the most competitive price for the customer through various machine options • Available in 380 Volt or 220 Volt versions • Compliant with CE (European) standards • Door-to-door pricing for worldwide delivery • References from existing customers in your country MACHINE CONTENTS • SC101 S Single Corner Welding Machine • SC 211 Aluminum & PVC Mullion Processing Machine (2 blades) • SC 301 PVC Bead Cutting Machine or SC 301 S Aluminum & PVC Bead Cutting Machine without mold (applicable to 12 different beads) • SC 401 Aluminum & PVC Under-Cutting Saw (includes Ø450 mm saw blade) • SC 501 PVC Handle Drilling, Grooving, and Water Drainage Machine or SC 502 S Aluminum & PVC Handle Drilling, Grooving, and Water Drainage Machine (High-Frequency Motor) Nsdpfx Aerc H Hfsdwjcl • SC 601 PVC Corner Cleaning Machine (3 blades)

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: FULL CNC MAKİNE PARKURU, • Enables production of 200 - 220 windows in an 8-hour working shift. • This set provides customers with rapid production capability thanks to various machine configurations. • Available in 380 Volt or 220 Volt options. • Compliant with CE (European) standards. • Door-to-door delivery prices to any location worldwide. • References available from previous clients in your country. • You can choose different machines from our catalogue and create custom combinations. • All machines are covered by a 2-year warranty. Njdpfx Adsrfy Idewocl MACHINE LIST • SC 4000 S Fully Automatic Servo Motor Double-Head Aluminum & PVC Cutting Machine ( Ø550 mm saw blade) • SC 5000 S Aluminum & PVC 3-Axis CNC Milling Machine • SC 521 S Triple Water Drainage Opening Machine with High-Frequency Motors • SC 100 Double-Head Welding Machine • SC 6000 S CNC Corner Cleaning Machine (2 Axis) • SC 211 Aluminum & PVC Mullion End Milling Machine • SC 301 S Aluminum & PVC Glazing Bead Cutting Machine (No Mould Required) • SC 902 S Hydraulic Aluminum Corner Crimping Machine • SC 801 Air Compressor (500 Litre) Please request our catalogue for further details. We can provide worldwide door-to-door delivery.

Condition: used, mileage: 27,877 km, power: 100 kW (135.96 HP), first registration: 10/2024, fuel type: diesel, overall weight: 3,225 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,978 mm, loading space length: 3,002 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0945. RR24958 ----EQUIPMENT * Airbag (passenger side) * Towbar preparation kit – Electrical preparation set for towbar – wiring harness, 13-pin socket and trailer module for retrofitting a towbar * 70-litre fuel tank * LED headlights – LED high beam – LED low beam – LED daytime running lights including integrated front LED indicators – static cornering light – automatic high beam assist * Cargo area floor: hardwood * Cargo area protection package "Express Line" – Multifunction cargo floor made of hardwood with anti-slip coating incl. 3 integrated airline rails and lashing eyes – Airline rails on right and left side walls, at medium and high position, incl. lashing eyes – Full-height interior side wall cladding – additional mounting points for racking systems or further accessories * Technology Package 5 – Exterior mirrors with indicators, electrically adjustable, heated and foldable – Audio system, 13 – Multifunction display, Ford SYNC 4 with navigation – Blind Spot Assist incl. Cross Traffic Alert, reverse emergency brake assist – Pre-Collision Assist, camera and radar based – Driver drowsiness alert – Wrong-way warning – Lane keep and lane change assist – Traffic sign recognition – Front/rear parking sensors – Adaptive cruise control – Intelligent speed limiter – Reversing camera – Sensico leather-look steering wheel – Safety and ESP * Socket: 12-volt connection in the cargo area (D-pillar) * 2-stage unlocking for passenger compartment and load compartment (rear doors or rear wing door) prevents locking of open doors * Transmission: 6-speed manual * Anti-lock braking system with electronic brakeforce distribution (EBD) * Driver's airbag * Exterior mirrors electrically adjustable and heated * Exterior mirror housings made of black-grey plastic Ncjdpfx Aexhaplsdwel * Battery: H7 AGM single battery * On-board computer with consumption and mileage data (e.g. range) as well as outside temperature display * Roof: flat * Roof console * Rear double-wing doors with 180° opening angle (without windows) * Rev counter * Third brake light * Electronic safety and stability program (ESP) – Hill start assist – Emergency Brake Assist (EBA) – Traction control (TCS) * Front power windows – with quickdown/-up function for driver’s side * Electronic parking brake * FordPass Connect – including live traffic data and 5G WiFi hotspot – Information on current vehicle status or location and remote control of selected vehicle functions via the FordPass app – Current real-time traffic information (in conjunction with navigation system) – WiFi hotspot (up to 5G/LTE, for up to 10 mobile devices) – For more information on FordPass Connect please refer to * Heated windscreen * Grab handles, driver and passenger sides * Glove compartment with lockable lid * Front interior lighting with delayed shut-off * Automatic climate control in front – with recirculation heater – with R-1234yf refrigerant * Front headrests (3) * Paint: solid color * Cargo area lighting (LED) * Steering wheel: plastic steering wheel * Small centre console * Emergency call assistant (eCall system) for automatic or manual emergency call in case of an accident * Diesel particulate filter * Radio accessories: 4 speakers * Tyre pressure monitoring system (TPMS) * Windscreen wipers with rain sensor

Condition: ready for operation (used), power: 15 kW (20.39 HP), empty load weight: 5,200 kg, Punching line for flat iron and corners - CNC controlled (Siemens Sinumerik) - With CNC automatic length feeding system: 7000 mm - 4 punch stations 100 Ton – Cap: Ø 50 in 20 mm thickness - Movements: X=7000 mm, Y:760 mm - Max width: 750 mm - Max height: 20 mm in flat steel or 240 mm in U / I beams corners Punchingcapacity: 4 x 100 Ton each Dia x sheetthickness: Ø 39 x 20 mm / Ø 58 in 13 mm / Ø 90 x 8.5 mm Strokes/min: 10 -> 100 str/min Work level: 1075 mm Nsdpfx Aoycmppodwocl

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: GG220N-15839, overall weight: 4,950 kg, input current: 92 A, input voltage: 400 V, year of last overhaul: 2025, For sale: double edge machine with 2 x 10 cup wheels and corner deburring function. This is a single machine with a maximum working width of 2500 mm. The machine is still connected and can be tested at any time. Nodpoxzgrtsfx Adwjcl

Condition: used, mileage: 4,32,893 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, traction control, trailer coupling, permissible total weight: 18000kg, leaf air suspension, retarder, digital tachograph, trailer coupling: on end cross member, ring spring, on end cross member frame, fifth wheel coupling: 150mm height, JOST JSK 42 K0 2 inch, shunting coupling: ring spring 6451 on end cross member, on end cross member, ring spring, on end cross member frame, electronic braking system EBS, brake assistant, electric stability program ESP, traction control ASR, Climatronic, additional heating: 6kW, comfort seat driver/passenger, driver/passenger seat air-suspended, armrest driver, heated driver seat, automatic headlights: with light sensor, headlight range adjustment, MAN Media Truck Advanced, MAN SmartSelect, sound system, lane departure warning, rain sensor, multifunction steering wheel, adjustable steering column, driver lumbar support, roof hatch: electric glass roof hatch with darkening and mosquito net, roof spoiler: 600 mm, Fog lights, outside mirrors electric and heated, curb mirror electric and heated, immobilizer: electric, central locking. with remote control, tinted glazing: tinted door windows, tinted laminated safety glass windscreen, rear differential lock, underrun protection: front, sun visor: in front of windscreen, twin tires: on rear axle, aero package, cool box, rotating beacon: rotating beacons on cab roof, right and left, LED rotating beacons yellow (individual LEDs light up in a cascade - all around), axle load indicator, work lights: halogen work lights white, hill start assist: MAN EasyStart, LED daytime running lights, 1x15-pin connector, cup holder, Efficientline package, Efficientroll, high beam assistant, cornering light, telematics system: MAN Telematics, light sensor, smartphone app integration, speed limiter: adjustable driving speed limiter (FGB), limiter (engine cut-off), electronic 89 km/h + 1 km/h tolerance (engine cut-off), anti-spray, trailer brake connection: Wendelflex with standard coupling on trailer side, MAN EasyContr control panel Ncedpfx Aov Htpyedwol