Used Emcoturn 342 for sale (340)

Condition: used, Year of construction: 1995, turning length: 460 mm, turning diameter: 440 mm, spindle bore: 65 mm, Control: Siemens 810T Iedsxw Rhkepfx Aanetr Turning length: 460 mm Turning diameter: 440 mm Tool holder: VDI 30 12-position turret (6 driven stations) Spindle bore: 65 mm

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Itjdpou Ibihsfx Aanor Technical details shown in attached pdf document. Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2011, EMCOturn E45 CNC lathe with C-axis Year: 2011 turning diameter 220 mm turning length 310 mm control Siemens 828D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg Accessories/options: - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup - footpedal - tailstock - parts cather - 3-jaw hydraulic chuck - coolant tank Itedpfjxvcrxox Aanor Runned hours: 8173 Under power in our warehouse!

Condition: used, Year of construction: 1983, Please contact ATS Norway for more information Please provide reference number upon request: 20640 Specifications: Itodpfxewp Etze Aaner 1983 model Hours: with reservations Tires (see pictures) Manual attachment 4x4 Bucket Total width: 1.8 m Hydraulic outlets front and rear Trailer hitch Ready for delivery Description:Lundberg 342 Wheel Loader from 1983.Sold with a bucket.Owner says the brakes are bad on it.Ready for delivery. Own weight: Model: 342

Condition: good (used), PLC controller, Siemens Simatic Net CP Profibus, communication processor Manufacturer: Siemens, Simatic Net CP Profibus Ovp -Type: 6GK7 342-5DA02-OXEO CP 342-5 S7-300 Profibus 12MBAUD -Number: 2x Profibus available Itodpjhy T Hwofx Aaner -Price: per piece -Cardboard dimensions: 150/130/H50 mm -Weight: 0.3 kg/pc.

Year of construction: 2001, condition: reconditioned (used), CNC turning and milling center EMCO ET332 MC with the following equipment: Itsdpfx Aoi Ik Aneansr - 2 turrets with driven tools VDI25 - 1 slide (top) X and Z axis - 1 carriage (bottom) X axis - Main spindle with hollow clamping cylinder 45mm passage and C-axis - Counter spindle with Z axis, partial hollow clamping cylinder and C axis - Emco front loading system - chip conveyor - Oil mist extraction (electrostatic) - Machine was partially overhauled

Condition: ready for operation (used), Heidenhain QSY 190F EcoDyn SN: 25 342 980 C, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this item. Please ask for price separately! Iodou T Uviepfx Aanjtr

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Iedpfx Aajwmzhpjnotr Collets Various tool holders

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Itedpfsw Rrvwjx Aaner Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Year of construction: 1996, condition: repair required (used), Desiccant air dryer in need of repair. Suitable for hobbyists or as a parts donor. Model CTT 342. Power: 39 kW. Year of manufacture: 1996. Iedpfx Aasxtvcfjnotr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: M1617, working width: 4,200 mm, sheet thickness steel (max.): 25 mm, overall weight: 40,000 kg, power: 40 kW (54.38 HP), bale length: 4,350 mm, TECHNICAL DETAILS Sheet width: 4200 mm Sheet thickness: 25 mm Pre-bending: 20 mm Bale length: 4350 mm Total power: 40 kW Roller dimensions Top roller diameter: 430 mm Bottom roller diameter: 435 mm Side roller diameter: 360 mm MACHINE DETAILS Machine dimensions (LxWxH): 9700 x 2500 x 2400 mm Machine weight: approx. 40,000 kg EQUIPMENT - Hydraulic counter bearing Isdpfx Asv E Nt Ssanotr - 1 exchangeable top roller (305 mm diameter)

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Itsdpjww Hx Isfx Aanor

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 50 mm Isded Txg Aopfx Aanotr -piston rod: 20 mm (connection M16 x1.5 thread) -Price: per piece -Number: 5 pieces -Dimensions: 260/65/H65 mm -Weight: 1.6 kg/piece

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Itodpfjg Rcf Ssx Aanjr

Condition: like new (used), Year of construction: 2018, Technical Data: • Swing diameter over cross slide: 430 mm (max. turning diameter 220 mm) • Turning length: max. 670 mm • Spindle bore (clearance diameter): 45 mm • HS spindle interface DIN 55026 A2-5 • Main drive power: 13 kW • Max. torque: 78 (100) Nm • Speed range: 0–6300 rpm • Counter spindle interface: DIN 55026 A2-4 • Number of tools: 12 driven tools, max. speed: 0–6000 rpm • Tool holder: VDI 25 • Pressure boost station E45 for central coolant system; centrifugal pump 14 bar; lifting pump min. 1.5 bar • Chip conveyor: hinge belt conveyor, discharge height 1200 mm • Swing loader Emcoturn E45 with loading and unloading system; 2-finger parallel gripper / 90° rotating module • Belt conveyor for RT parts feeding: length 1300 mm / width 567 mm; chain pitch 27.1 mm (1800L) • Control: Siemens 828 D ⸻ • Connected load: approx. 46 kVA Iedpfxewl Uu Ho Aanjtr • Voltage: 400 V / 50 Hz • Weight: approx. 4,300 kg • Space requirement: approx. 15 m²

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: M 73 175, feed length X-axis: 320 mm, feed length Y-axis: 60 mm, feed length Z-axis: 2,100 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 3,150 rpm, spindle speed (min.): 45 rpm, quill stroke: 160 mm, quill travel distance: 420 mm, quill diameter: 90 mm, position of the milling head: vertikal, type of input current: three-phase, table load: 3,000 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Wanderer CNC extruder screw milling machine Control: Siemens, type Sinumerik 3M/4C Swing diameter: 200 mm Workpiece length: 2,500 mm Drive power: 20 kW Tool holder: SK50 Itjdpfowbzvvsx Aanor Workpiece clamping device: 3-jaw chuck (Forkardt F315)

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Itjdped Ty Agjfx Aanor -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 232/65/H65 mm -Weight: 1.45 kg

Year of construction: 2012, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Itsdpfjg Rcf Iox Aaner

Condition: good (used), Technical data for the side panel: Shelving system: SSI Schäfer Type: R 3000 The scope of delivery includes: 01x side panel, used Designation: SWI 3422 for upright depth: 400 mm for frame height: 2,278 mm Material color: sendzimir galvanized Dimensions: 2.275 x 280 x 0.6 mm Weight per unit: 3.83 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Itsdpfxstul Ifj Aanjr General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: ready for operation (used), Maho 4022 226 3420 board, used, minor signs of wear, 100% functional, scope of delivery as per photos Itjdpfji Ebztsx Aanor

Condition: new, Siemens 1FK7034-2AK7 1-1RH2 synchronous motor, serial number: YF PD610915901, unused, 100% functional, scope of delivery as per photos Itodpfxoxdqukj Aanjr

Condition: ready for operation (used), Danfoss VLT FC-102P75KT4E20H1 XGXXXXXSXXXXXAXBXCXXXXXDX Frequency inverter HVAC Drive P/N 131F0342 SN 038910G241 75kW(400V) / 100HP(460V),used, minor signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iodsrv Rkrjpfx Aanjtr

Condition: ready for operation (used), Movomatic 15342.1240 module, serial number as per photo, used, minor signs of wear, 100% functional Ijdpfx Aaoi Eb Skjnotr

Condition: ready for operation (used), Siemens 6GF3420-0AA20 code reader, serial number as per photo, used, minor signs of use, 100% fully functional, scope of delivery as shown in photos Isdpfx Asxagthsanotr

Condition: new, Heidenhain LIP 501C -1240 1.0U KF0, glass scale, . 334908-20 , SN:8342004 , unused in opened original packaging, 100% functional, scope of delivery as per photos Itedei Ean Topfx Aanor