Used Counterweight for sale (208)

Condition: new, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 31,000 mm, fuel type: diesel, construction height: 3,100 mm, gearing type: automatic, Equipment: cabin, head guard, KEY FEATURES - Westtech WOODCRACKER® CS 750 Smart (cutting diameter 75 cm) - Protective grille for front windshield - Enclosed mast - Mast scraper for mast extensions - LED headlights on mast and cab - Camera system (cameras mounted on mast front, lateral side, and rear on counterweight) Ndedpfjxtvr Tex Aansf - Advanced radio remote control with saw function and stabilizer control - 40 km/h or 20 km/h versions - Vibration dampers - Support plates with holder EQUIPMENT - Maintenance-free wet disc brakes on front and rear axles - Comfort seat with adjustable weight and armrests - Spacious pressurized cab with air conditioning and heating - Operation via clear 10-inch touchpad and navigation knob - ROPS/FOPS cab with optimal all-round visibility - 360° continuous rotation - 12 V outlet in the cab - Automatic leveling of scissor outriggers - Attachment recognition system - Levelling system on wheels - Lighting according to StVZO regulations - TÜV package + TÜV certification - Customizable maneuvering settings - Fork carriage with 1,200 mm forks FIELDS OF APPLICATION - Safe disassembly of trees in sections - Specialized tree removal in urban areas or residential developments - Maintenance work along roads and routes - Problem tree felling - Tree felling on slopes and embankments - Ideally suited for municipal operations - Removal of storm damage - Traffic and pathway safety EXCLUSIVE: THE MAGNI RTH 6.31 SH / 6.35 SH WITH WESTTECH WOODCRACKER® CS 750 SMART is available exclusively from us, Stefan Ebert GmbH in Burghaun. We are official sales and service partner for Magni telehandlers, Westtech Woodcracker, JCB construction equipment, Mercedes-Benz, and Iveco, and with over 800 used commercial vehicles, one of the largest commercial vehicle dealers in Germany. We deliver the complete Westtech Woodcracker product range for you! On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. For further information, visit our website. Errors and prior sale reserved!

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: Nedou Uvalspfx Aanjdf ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: used, lifting height: 18,500 mm, Year of construction: 2016, Drivetrain Drive: Wheel Weights Empty weight: 3.600 kg Functional Njdpfxsxivwno Aanjdf Lifting capacity: 2.700 kg Identification Serial number: AMC2213 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 4.15x1.1x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,915 h, load capacity: 5,000 kg, lifting height: 4,630 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Technical condition: very good Front tyres type: Superelastic Front tyres condition: 60 - 80% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery year: 2021 Description: Price includes new safety inspection (we only use original Still parts), counterweight freshly painted, battery from 2021 will be overhauled and tested with Kappa test at 90%, suitable charger with plug included. We are happy to organize cost-effective transport for you. Leasing with option to buy is possible! Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, cabin heater, full cabin, full free lift, CE certificate, Ndjdpev Efghefx Aanjf Multilever control

Condition: new, Year of construction: 2025, operating hours: 1 h, Schäffer 2630 Yard Loader New machine, approx. 3 operating hours Equipment: ROPS driver protection canopy Kubota diesel engine D1703M 18 kW / 25 HP Rear counterweight plate Hydraulic tool locking Restraint system Hydraulic fast gear Additional equipment: Counterweight 81 kg Reinforced gear pump Mechanical detent for auxiliary control unit Ndodpexqt Nkofx Aanjf Lighting system preparation LED work light Main battery switch Tow pin + lashing eye Tires 31x15.5-15 AS Euro hitch | Internal no.: 11314119

Condition: new, machine/vehicle number: 207ad28f83705ed0d38a4f174, empty load weight: 3 kg, maximum load weight: 11 kg, overall weight: 14 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis Wechel central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 flush with rear (for 7.15 swap bodies not flush with rear, forklift pockets/frame protrude) Telescopic front support leg 1 pair of front gear support legs, with straight lower section and single-sided operation in FR right Wheel chocks with holder Aluminum side bumpers Steel underride guard Half-shell mudguards Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1500 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle)The axles are shifted to the rear by the forklift bracket, observe load distribution when driving without forklift. Customer risk! (For swap body trailers, driving with a forklift is only permitted in conjunction with a swap body) Forklift bracket as AU 203670 adapted to 7.45 m swap bodies Counterweight at the front between the frames, approx. 300 kg, if necessary, exact check still required Towing device central axle trailer Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required if ordered) Lower coupler drawbar without length adjustment drawbar Axles + suspension SAF drum brake axles of the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-applied parking brake Duomatic connection at the front, with connection line to the engine trolley, in FR-left Duomatic connection at the front, with connection line to the motor vehicle, connection in FR-right EBS, electronic brake system with EBS plug at the front, with connecting cable, in FR-left Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in each case in lowering / lifting position Vehicle - driving stability system Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting on the side, lights mounted in a protected position! 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin plug at the front, with connecting cable, in FR-left Njdpfei Ri Iaox Aanjdf 2 x 7-pin sockets in FR left rear for truck-mounted forklift 1 x 15-pin socket in FR left rear for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reversing light) Additional LED work light(s) at the rear, switched via reversing light Approval / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame

Year of construction: 2008, condition: excellent (used), machine/vehicle number: NE151/91, 1x Mobile traveling crane Column-mounted slewing jib crane Traveling crane Ndjdpferwkahjx Aansf Type Vetter Mobilus 2,5-3.0 BJ 2008 Payload at full outreach 250 KG / 0.25 tons Overall height: approx. 2.75m, outreach: approx. 3m Hook height: approx. 2.15m, lower edge of boom 2.3m Column with counterweight incl. chain hoist, cable tow and accessories with Demag DC chain hoist Weight complete approx. 2700 kg Connection to 400V, swivel range 360 Very good condition, fully functional. Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale See pictures Shipping by forwarding agency or pickup

Condition: used, Year of construction: 2023, operating hours: 5 h, fuel type: diesel, color: blue, power: 10 kW (13.60 HP), mileage: 5 km, Equipment: additional headlights, all wheel drive, cabin, rubber tracks, standard shovel, Gekko Network KG in Gersthofen - your supplier for vehicles of all kinds. You can reach us by phone, email or in person. Model CX15CP Technical parameters: Weight kg 1520 Bucket capacity m³ 0.025 Bucket width mm 380 Boom length mm 1560 Arm length mm 793 Tank capacity l 20 Hydraulic accumulator capacity l 13 Hydraulic system : Oil pump model DHP0010 Maximum oil pump pressure MPa 17 Hydraulic pump flow rate l/min 28.5 Performance: Rotation speed ipm 10 Travel speed km/h Gradeability 25 % Ground pressure kN 25 Bucket breakout force kN 9.6 Boom impact force kN 8.5 Engine: PERKINS Rated power kW / rpm 10.3 / 2400 / 14.7 / 2200 Maximum torque N - m 51.8 / 51.8 Number of cylinders 3/3 Air cooling Ndsdpfjklwvcjx Aanof Working range: max. digging radius mm 3225 max. digging depth mm 1650 max. digging height mm 2740 max. unloading height mm 1970 max. height of raised dozer blade mm 170 max. depth of lowered dozer blade mm 220 Boom swing angle 50 ° left / 70 ° right Dimensions: Wheelbase mm 950 Rail length mm 1290 Distance mm 405 Counterweight swivel radius mm 850 Width mm 1055 Track width mm 180 Rail height 320 mm Length mm 3160 Height (without / with roof) mm 1570/2200 Please note that some of the vehicles in our range may be in our external warehouse and are not directly available for viewing on site. In any case, please contact us in advance atOur complete offer is available on request. Construction machinery, Other construction machinery Year of construction: 2021 Operating hours: 8 Environmental sticker: -- All-wheel drive equipment Are you looking for other construction machinery or equipment? Please do not hesitate to contact us.

Condition: used, mileage: 10,350 km, lifting height: 35,000 mm, Year of construction: 2023, operating hours: 994 h, Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Functional Lifting capacity: 19.640 kg Identification Serial number: 1190603 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Ndsdpfxovbaqgj Aanjf Transport dimensions (LxWxH): 9.99x2.55x3.95 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Fine boring head, spindle tool, boring head, bridge tool, fine boring head boring tool, boring spindle, boring bar Holder for bridge tool = SECO - epb GRAFLEX (Made in France) type A731 200 Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-010 Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500 Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-600 Tool holder: GRAFLEX holder size G7 = Ø 46 mm Machining diameter: 200-280 mm Ndedpeqgpb Eefx Aanjf Adjustment accuracy: 0.01 mm Machining depth without extension: max. 140 mm - Adjustment by micrometer spindle and vernier (in steps of 0.01 mm, graduation 2.5 µm, to the diameter) - Cutting insert holder for Route cutting insert with approx. 10 mm edge length Total tool length with extension and mounting spigot: 184 mm Weight complete: 11.5 kg Very good condition, as good as new - probably unused

Condition: used, blade length oben 211/unten 180 mm plate thickness max. 6 mm round bar steel max. 13 mm weight ca. 19 kg Sturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm. With compound action. Cuts sheet metals and round steel bar. Colour: Red-brown Njdjxbtrmspfx Aansdf

Condition: new, machine/vehicle number: 745183e095a8a43501797c66c, axle configuration: 2 axles, first registration: 12/2022, tire size: -, Further information Tandem platform trailer Type TPS 180 Standard building material with forklift bracket Weights and dimensions: Total weight: 18000 kg Ndsdondwdhepfx Aanof Unladen weight (basic version) approx.: 4600 kg +/- construction tolerance Payload approx.: 13400 kg Drawbar load: 1000 kg Overall length approx.: 9925 mm Overall width max.: 2550 mm Overall height approx.: 3150 mm Interior length approx.: 7750 mm Interior width approx.: 2480 mm Platform height approx.: 1200 mm Towing height approx.: 380 mm Towbar length approx.: 2150 mm Chassis central axle trailer Fine-grained steel welded construction Outer frame slightly slanted new design with Load-Lock profile for tensioning strap attachment 1 pair of gear support legs at the front, with straight lower section and single-sided operation in FR right 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Quarter-shell mudguards 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Please note! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1900 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle) The axles are shifted backwards by the forklift bracket, observe load distribution when driving without forklift. Customer risk! Note! Forklift bracket! Carrying a forklift truck can lead to a considerable reduction in the drawbar load. Front counterweight required! On wet and slippery roads, an additional ballast weight provided by the customer or a load of at least 2 tons at the front of the bulkhead is required; the speed must then be reduced and adapted to the roads and driving behavior. The truck must always be secured with chains while driving. The distance between the lift mast and the body must be max. 45 mm or the vertical forklift tines must be in contact with the forklift pockets at the end. We assume that the towing vehicle has no steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Towing equipment for central axle trailers Towing bar with tested 50 mm towing eye, forwarding version (not suitable for trucks with tail lift) Towbar under-coupler Folding bracket with spring support on the drawbar, for guiding the connecting cable to the truck Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension with lift & lower valve 1st axle automatic lift axle with proximity switch, for lift axle (only for driving with forklift) Wheels and tires 385 / 65 R 22,5 according to manufacturer's choice Steel rims factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Vehicle stability system Duomatic connection at the front, with connecting cable to the motor vehicle, connection in FR-right EBS, electronic brake system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, LED multi-chamber lights, amber LED lighting on the side, LED lic

Condition: used, Year of construction: 2025, operating hours: 53 h, SUNWARD SWE20F Year of manufacture: 2025 Approx. 53 hours (may increase due to demonstrations) Operating weight: 1.94 t Engine: Yanmar 3-cylinder diesel engine 3TNE88 Japan Power: 13.4 kW/2200 rpm Telescopic undercarriage: 99–132 cm wide Foldable dozer blade 2 travel speeds Articulated boom (can work directly against walls and hedges) Long dipper arm, digging depth 238 cm Load-holding valve Pump: Kayaba Japan 2x proportional joystick controls LED headlights Radio with SD/USB 2x auxiliary hydraulic lines (for grab/hammer/shear) 1x quick coupler hydraulic lines With genuine counterweight—unlike replicas, which only have a sheet metal cover in the rear, risking machine tipping 4 years remaining warranty according to manufacturer's policy Including MS01 30 cm and 50 cm digging buckets 1 m fixed ditch-cleaning bucket Price: €19,500.00 net Optional: 1 m hydraulic ditch-cleaning bucket for an additional €500 net. All information without guarantee. Ndsdoxmua Aspfx Aanjf Take advantage of this unique opportunity to get a professional-grade machine at an unbeatable price. Sunward is among the world’s 20 largest excavator manufacturers. Viewing possible at any time by appointment. Trade-in of your used machine possible. We are your authorized Sunward dealer for the following regions: District of Wittenberg, District of Nordsachsen, District of Leipzig, City of Leipzig, District of Elbe-Elster, District of Oberspreewald-Lausitz, City of Cottbus, District of Spree-Neiße, District of Oberhavel, District of Barnim, District of Märkisch-Oderland, City of Frankfurt (Oder), District of Oder-Spree, District of Dahme-Spreewald, District of Teltow-Fläming, District of Potsdam-Mittelmark, City of Potsdam, City of Brandenburg, District of Havelland, City of Berlin.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,585 h, machine/vehicle number: HHKHK607CE0000762, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, steel tracks, Year of manufacture: 2023 Njdpjxl R Iyofx Aanjdf Operating hours: approx. 1,585 Engine: Cummins B6.7 Power: 129 kW (175 HP) at 2,000 rpm Emissions standard: EU Stage V Operating weight: approx. 22,100 kg Adjustable boom: 5,700 mm Stick: 2,400 mm Stick safety valves Boom safety valve Central lubrication system (Beka Max) Bucket linkage available 2-way hydraulic lines Proportional control LED work lights Adjustable boom: 5,680 mm Rearview camera Hi-Mate telematics system (mobile version) Roadliner tracks (600 mm) Air-cushioned, heated operator seat Proportional joystick Standard safety railings Laminated front window 7 mm Fuel pump Piping for quick coupler Bucket/grapple mode switch No slew lock Hydraulic oil VG46 Rain cover 360° LED warning beacon Counterweight Standard Hyundai key

Condition: used, mileage: 2,78,061 km, Year of construction: 2009, Drivetrain Drive: Wheel Weights Empty weight: 72.000 kg Functional Lifting capacity: 150.000 kg Identification Serial number: 068506 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Michellin Carrier engine: - Upper engine: - Upper hours: 15701 h Ndedpjw D N Rgefx Aansf Counterweight: 46800 Transport dimensions (LxWxH): 16.2x2.85x3.95 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Ndjdpfx Aajr Nfvmjnef Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Nodscblc Sepfx Aanodf Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: like new (used), Year of construction: 2015, Takeuchi TB 228 mini excavator year of production 2015 TECHNICAL PARAMETERS Parameter Value Operating weight 2,770 kg Maximum digging depth 2,875 mm Ndodpjtwwufjfx Aanef Maximum dumping height 3,190 mm Maximum reach 4,850 mm Arm length 1,445 mm Rotational speed 10 rpm Traction force 2,873 kg Lifting capacity 530 kgPOWER Parameter Value Make / Model Yanmar / 3TNV82 EPA Tier 4 emission standard Cylinders / Capacity 3 / 1.3 L Gross power (SAE J1995) 18.1 kW (24.3 hp) Net power (SAE 1349) 17.5 kW (23.5 hp) Nominal speed 2,400 rpm Fuel tank capacity 53.0 L Fuel consumption (65% full load) 3.0 L Electrical system 12 V / 40 A ELECTRICAL Parameter Value Coolant temperature and fuel level indicator Yes Audible and/or visual signals Yes 12-volt system with 40-amp alternator Yes Work lights Arm, side cover Engine heating Yes Hour counter Yes Trip alarm Yes Chassis and frame Parameter Value Two-speed drive with automatic shift Yes Heavy-duty dozer blade Yes Cast iron protective counterweight Yes Rubber tracks with a width of 300 mm

Condition: used, Year of construction: 2025, sheet width 2020 mm plate thickness 2.0 mm distance between columns 2100 mm angle adjustable from - to 130 Grad total power requirement manuell weight of the machine ca. 1850 kg. range L-W-H 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight Nedpfxsxab S Ss Aanjdf - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Nedpfx Aaoxk Tzgjnodf

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, Drivetrain Drive: Wheel Ndodpfxjtr H Sxj Aanjf Weights Empty weight: 29.900 kg Identification Serial number: 783703 Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: new, sheet width 1050 mm plate thickness 2,0 mm distance between columns 1050 mm down holder 1 Stück fence Tisch 80 - 480 mm fence Breiten 0 - 600 mm table-size 1300 x 600 mm work height max. 760 mm total power requirement manuell kW Ndedpfx Aoxabdheanof weight of the machine ca. 413 kg. range L-W-H 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Identification Ndjdjvbanlepfx Aanef Serial number: 783801 Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 1,94,799 km, lifting height: 44,200 mm, Year of construction: 2011, Drivetrain Drive: Wheel Weights Empty weight: 33.000 kg Functional Lifting capacity: 40.000 kg Identification Serial number: WMG3208H8CZ000936 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Njdpewht U Dsfx Aanjdf Counterweight: 0 Transport dimensions (LxWxH): 8.7x2.5x3.6 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 2,21,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Ndodpfx Ajwwqbyoanof Weights Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.3x2.4x3.45 Additional information Please contact PFEIFER GROUP for more information