Used Cross Conveyors Feeders for sale (17,890)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Manufacturer: Metaltec Year of construction: 2001 Fjdpfx Aajit Nkpobsgh Power: 0.5KW Weight: 300kg Mesh permeability: 7 mm Size: 500*1200*220mm Choice for two factions.

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Fgodpfxexg Hanj Aabsh Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Condition: good (used), Year of construction: 2010, HORIZON CROSS FOLDER AFC 746F · Ser. No. 001001 · Year of production 2010. · 6 pockets + 2 knives + additional pocket (side) +press stacker - paper weight: 40-250 g/sqm - stack height palette feeder: 1.200mm - sheet size: max. 738x1.100mm with palette feeder min. 210x297mm Fgjdepl Ufvspfx Aaboh

Condition: used, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Fgodpfx Aexmk Ddeaboh Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: excellent (used), Year of construction: 2005, Connection values: Single phase, AC 50 ... 60 cycles Voltage switchable 200/220/240 V ± 10 % Power consumption: 110 W Heat emission: 95 kcal/h Fedpfoxmhhyox Aabogh Application: Form depth 3…12 1/2" // Form width 148…470 mm Paper weight: Single webs 45…170 g/m2 // Multiple sets 125 ... 300 g/m2 Stack height up to ca. 300 mm The machine worked together in production with MICRO-FORMS LABELLER 18S (Sticks labels on sheets) // Ref. No.: 40016.25

Condition: excellent (used), functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 150 mm, cutting length (max.): 352 mm, total width: 800 mm, total length: 4,150 mm, total height: 1,300 mm, saw blade diameter: 330 mm, overall weight: 600 kg, type of input current: three-phase, disc diameter: 330 mm, rotational speed (max.): 2,800 rpm, BLITZ 330-L double mitre saw for wood, aluminium Specification: • Condition – used, after inspection/service • Manufacturer – BLITZ • Model – 330-L • Main motors – 2 x 1.5 kW and 2,800 rpm • Pneumatic head control • Max. cutting length – 352 cm • Min. cutting length – 38 cm • Max. cutting cross-section – 100x150 mm (at right angle) • Max. blade diameter – 330 mm • Spindle axis – 20 mm • Miter cutting range – from -45 to +45 degrees (right, left) Fgsdpfx Ajxl Eadoabeh • Vertical workpiece clamps • Weight – approx. 600 kg • Overall dimensions – 415 x 80 x 135 cm (L x W x H) Additional information: • Very good, factory technical condition • Photos shown reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Fodpfx Aaeuiwqhsbjgh Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: good (used), Year of construction: 1985, functionality: fully functional, Heavy-duty log cross conveyor ( was behind a debarking line ) year of construction approx. 1985 4 conveyor lines, motorized length approx. 8m width 4,35m Height approx. 1.8m ( will be delivered disassembled ) Fgodpsuthh Hsfx Aabsh in good condition

Condition: good (used), Saw blade Ø 500 mm, cutting height approx. 160 mm, cutting width approx. 550 mm, saw motor 3 kW, upper saw section swivelling for bevel cuts with locking mechanism, cutting depth adjustment via spindle ratchet, with new 500 mm Ø CV saw blade Fgsdovl E Niopfx Aabjh

Condition: used, total height: 1,550 mm, total length: 1,400 mm, total width: 1,100 mm, - Max. saw length [mm]: 6000 - Max. saw height [mm]: 230 - Input table length [mm]: 6000 - Options: Automatic pusher system - Documentation available: No - Transport dimensions: 1400mm x 1100mm x 1550mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fgsdpoxixh Ajfx Aabjh Glenn Smeets

Condition: like new (used), Fully mechanized line for splitting and cutting (Masterflex+Paul) consisting in: - transverse conveyor for 2 packages - automatic destacking and singularization installation with slat recovery with conveyor included Fgsdpfx Ajkt I Uyeaboh - transverse conveyor for circular feed piece by piece - trolleys on the rail for circular feeding - circular Masterflex provided with 4 movable blades, axis to axis, free passage width of 1,000 mm, cutting height 100 mm - 2 motors of 50 KW, 4 releases electrically controlled by joystick, provided with a control panel - timber evacuation conveyor provided with a waste separator (edges and hems) - waste conveyor + automatic waste cutting pendulum - parts recovery conveyor with return to the operator for repair - transversal conveyor with singularization for feeding optimizer Paul - optimizer Paul model, passage width of 1,000 mm, cutting height of 100 mm, equipped with marking station for defects, with laser (without chalk) - sorting line by optimizer with 20 ejectors. Installation is in a very good working condition.

Condition: used, Year of construction: 2006, overall weight: 92 kg, hopper volume: 6 l, The Motan material separator can only be used in conjunction with an bypass compressor. The bypass compressor is not part of the offer. Payment: 100% prior to delivery Fedpfjit Ru Asx Aabegh Manufacturer: Motan Type: HLB 06-1-A010-0 Condition: gebraucht CONVEYING DEVICE: Abscheider Conveying capacity: - Hopper volume: 6 l Connection diameter: 40 mm (Materialleitung) Total installed power: - Other equipment: Spannung: 24 V Bedienungsanleitung: deutsch GENERAL DATA: - Total weight: 9,2 kg Total size L x B x H: 28 x 23 x 63 cm

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Fgedpfx Aetu Hy Eeaboh Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: used, Cross table with handwheels Table size: 300 x 200 mm Travel in X: 160 mm Travel in Y: 240 mm Construction height: 141 mm - Spindle pitch 4 mm (4 mm travel per handwheel rotation) - Rotatable by 340° - Dovetail guideway - 2x T-slots in the clamping surface, 14 mm Weight: 38 kg Good condition Fgsdpfx Aasxf Uxisbjh

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Fgedpsw Sy T Hefx Aabeh Storage location: Nattheim

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. Fgjdpfoxl Dnajx Aaboh OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars • Cutting frame profiles to size The machine is additionally equipped with a transverse feed/magazine for components.

Condition: used, cutting width max. 610 mm Cutting height max. 150 mm Saw blade diameter 600 mm Motor output 9,2 kW turning speeds 2750 U/min Required air-pressure 7 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw ----- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. Fgjdpfovnv U Usx Aabjh The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 600 mm, Z=132. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: 420x150/520x100/610x30 mm Saw blade motor power: 9.2 kW Saw blade diameter: 600 mm Saw blade type: HM Z=132 Saw blade rotation speed: 2750 rpm Air consumption per cycle: 7 Nl Intake nozzle: 2 x 140 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, Year of construction: 2007, overall weight: 115 kg, hopper volume: 6 l, The Motan material separator can only be used in conjunction with an bypass compressor. The bypass compressor is not part of the offer. Payment: 100% prior to delivery Fsdpfx Aoiacrmjabsgh Manufacturer: Motan Type: Metro HBS06-1ABA-AAA-A-A Condition: gebraucht CONVEYING DEVICE: Abscheider Conveying capacity: - Hopper volume: 6 l Connection diameter: 40 mm (Materialleitung) Total installed power: - Other equipment: Spannung: 24 V, neuer Filter + Filterhalter CONTROL: Multifunktions-Panel METRO HBS Bedienungsanleitung: deutsch GENERAL DATA: - Total weight: 11,5 kg Total size L x B x H: 34 x 38 x 70 cm

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Dimter OPTICUT 204R OPTICOM ASSIST control – programming in CZ/DE/EN Programming – by classes, quality, marking cut, length cut – full optimization Very simple programming Full documentation – operating manual, parts catalogue, pneumatic and electric schematics Maximum cutting length 4000 mm (extendable up to 6700 mm) Maximum cutting height 100 mm Maximum cutting width 260 mm Saw blade diameter 500 mm Feed speed 180 m/min Number of sorters – 4 (expandable up to 10) Saw lift – pneumatic Cutting accuracy +/- 0.5 mm The machine is powered and available for testing The machine is like new, 100% complete and fully operational! Fgodpfx Aexgdwdoaboh We can arrange transport within the EU.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 80 mm, cutting width (max.): 150 mm, saw drive: 5,500 W, power: 5.5 kW (7.48 HP), total height: 2,000 mm, total length: 20,000 mm, power of the servo motor: 5,500 W, total width: 2,000 mm, type of input current: three-phase, extraction connection diameter: 140 mm, compressed air connection: 3.5 bar, overall weight: 2,500 kg, Optimizing cross-cut system GreCon type 1004 with infeed cross conveyor with outfeed conveyor with 10 ejectors with chain Technical specification: Fjdpswy Np Usfx Aabsgh Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 2500 kg SICK LUT camera chalk recognition quality and length recognition and sorting station

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Fgjdpfjvu Hd Tex Aabeh Stop systems on re...

Condition: used, cutting width max. 330 mm Cutting height max. 150 mm Saw blade diameter 550 mm Motor output 7,5 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 550 the semi-automatic chop saw ----- - Maximum cutting area 220x150/330x50 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 7.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 550 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: 220x150/330x50 mm Saw blade motor power: 7.5 kW Saw blade diameter: 550 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Fodpfsvnv T Rox Aabogh ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, cutting width max. 375 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW turning speeds 2800 U/min Required air-pressure 6-8 bar Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 500 fast semi-automatic chop saw ----- - Maximum cutting area Option A: 220x125/310x50mm Option B: 350x80/375x50mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 5.5 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. Fgjdpfx Asvnv U Ioabeh HM circular saw blade, diameter 500 mm, Z=108. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: Option A: 220x125/310x50mm Option B: 350x80/375x50mm Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, Number of milling spindles 2 St. fence 1 St. workpiece ja yes STEGHERR Cross rung milling machine, Type KSF-mini ----- Including stop ruler with measuring scale and sliding stop. Tools included. Specialized jointer for the efficient production of cross-mustard joints. The KSF-mini cross-mustard jointer is the product of STEGHERR's extensive experience in building these specialized jointers for cross-mustard joints. With the KSF-mini, all common cross-mustard joints can be produced quickly and precisely. Even profiled joints can be machined on the KSF-mini. Precise routing is achieved because the workpiece is machined on three sides in a single clamping operation. The tool is driven by two three-phase motors; the workpieces are clamped pneumatically. The profile cutter is designed for the joint width. The saw blades that perform the flattening can be adjusted to the dimensions of the profile cutter using spacers. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V, 50 Hz Pneumatic pressure: 6 bar Included: Fjdpfswi Upfsx Aabjgh ----- Table base Foot switch Tools as shown in the pictures: 1 profile cutter 3 saw blades (corresponds to a 10 mm web width) Fence ruler with measuring scale and sliding stop as shown in the pictures. Installation dimensions approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical specifications according to the manufacturer, without guarantee!)

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Fgsdpev Uq Tlsfx Aabjh Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)