Used Cross Conveyors Feeders for sale (15,965)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Prjdjzp H R Espfx Alweb Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Board cross conveyor Psdpfx Asza Dvzelwerb Length: 8m Electric motor: 1.5 kW

Condition: good (used), functionality: fully functional, Sturdy, mobile roundwood and timber cross conveyor. Psdpozum Uuefx Alwjrb Equipped with 5 chain strands. Electric drive for mobility. Track width 1.60 m.

Year of construction: 2026, condition: like new (used), various vibratory conveyors / vibratory feeders Predpfxszzdvvs Alwob

Condition: used, functionality: fully functional, Well-maintained, inclined cross conveyor from Esterer, originating from a small sawmill. Drive via geared motor. 6 chain strands. Spacing: 2300 mm - 1500 mm - 1200 mm - 1000 mm - 1200 mm. Conveyor length approx. 3000 mm. Chain pitch 80 mm. Psdpfx Aljzw Epcswjrb

Condition: used, Multisaw cross feeder Pedpfx Asnwnpqolworb

Condition: used, Cross Conveyor: - total length: 7000 mm - total width: 2300 mm - feed motor power: 0.75 kW - trimming saw for material - saw motor power: 2.2 kW Pedpfxjxu E E Ej Alwjrb - max. saw blade diameter: 350 mm - cutting height: 80 mm

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Prsdpjrg Nzqsfx Alwjb

Year of construction: 2001, condition: good (used), functionality: fully functional, Pinomatic cross conveyor for a planing and sawing line Year of manufacture: 2001 Manufacturer: Pinomatic OY Type: POS 9+10 S/N: P1033 Motor-driven cross conveyor with 7 chain hoists Arm length: 6000mm Cross conveyor width: up to 4000mm (adjustable) Pedsv S Hfxjpfx Alwsrb Height: 900mm 6 fixed chain hoists 1 adjustable chain hoist Voltage: 230/400VAC

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Prsderg Nzxepfx Alweb Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Length: 315 cm Belt width: 150 cm Distance between scrapers: 31 cm Prodpfx Alezdux Tewsb Scraper height: 5 cm Drive roller diameter: 11 cm Side rail height: 11 cm Overall height: 24 cm Belt for food processing Stainless steel Manufacturer: Haith Please see my other listings.

Condition: used, Cross conveyor, 4-strand Prjdpfx Alozx Eh Uoweb Conveyor length: 2.3 m Width: 4.2 m Location: Germany, near Lake Chiemsee.

Year of construction: 2019, condition: like new (used), Board cross conveyor for sale. Six controls. Distance between controls 0.85 m. Width 4, 40m. Length 2.80 m. Drive, motor reducer 1.5 kw. In full working order, after repair. Predpfx Ajnl Dvlslwob

Condition: used, Tape dimensions: Length: 1600 mm Width: 1200 mm Drum diameter: 115 mm External dimensions: Width: 1900 mm Podpfxezdrbxj Alwjrb Length: 2750 mm Height: 580 mm Feeder displacement using a pneumatic actuator over a distance of approximately 1000 mm. The stated price applies to one unit. Please see my other listings.

Condition: like new (used), Machine ready for operation, equipped with a drip tray conveyor with a perforated belt. Can be used as an inspection conveyor, made of acid-resistant stainless steel Inox. Pedpsytm Ndofx Alwjrb

Condition: excellent (used), CATALOGUE NUMBER 7899 Technical data: - inlet cross-section of the chipper: 410mm x 180mm - shaft width: 430mm - shaft diameter: 400mm - number of knives: 2 pcs - screen size: 60x60mm - top: driving shaft, toothed - bottom: 2 driving shafts, toothed - length of the infeed conveyor: 2180mm - width of the infeed conveyor: 400mm - auto-reverse (adjustable) - main motor: 30kW - feed motor: 2 x 2.2kW - machine dimensions (L/W/H): 4300x1600x1100mm - weight: approximately 2000kg ADVANTAGES: - Polish production - Auto-reverse (adjustable) - With infeed conveyor - DTR documentation - Used chipper, very good condition Net price: 69900 PLN Net price: 16256 EUR, depending on the exchange rate of 4.30 EUR Prsdpfx Aezu R Urelwjb (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Robust cross-conveyor for round timber Predpfxozq T Ade Alwob For sale is an extremely robust cross-conveyor for logs, taken from a professional sawmill operation. Features: Heavy-duty industrial design Double chain conveyor Short conveying distance Fast and reliable transport of round timber to the log carriage Solid and durable steel construction Immediately available The system is in good, functional condition and can be inspected under power by appointment. Please submit a fair and realistic offer.

Year of construction: 2010, condition: used, Length: 406 cm Width: 60 cm Working width: 56 cm Sideboard height: 8 cm Overall height: 21 cm Prodpfx Alozdnm Dsweb Roller diameter: 11.5 cm Power: 0.65 kW Food-grade conveyor belt Stainless steel Manufacturer: Haith The stated price is for one unit. Please see my other listings.

Condition: used, Year of construction: 2016, Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Prodpfxek Abhhe Alweb For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed pull shaft, top and bottom - shaft motor: 0.78/1.1kW - electric automatic reversing (with adjustable settings) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm Prsdozruc Uspfx Alweb - belt feed, forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES – German-made – with conveyor belt feeder – automatic reversing – used shredder, very good condition Net price: 76,900 PLN Net price: 17,884 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt 2 levels type EZT with guide rollers -Speed: frequency controlled -Drive: 2x SEW Eurodrive -Conveyor belt length: 1400 mm -Belt spacing: 410 mm -Cross carriage: roller spacing 1000 mm -Number: 2x conveyor belt available -Price per piece -Dimensions: 1450/1550/H920 mm Prodpfx Aetrhm Ajlweb -Weight: 358 kg/pc.

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left Psdjrg Nzuspfx Alwsrb 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Stable roller conveyor with hydraulic lifting and lowering cross conveyor. Conveyor length to stop 6.0 m. Total length 7.10 m. Roller length 1,600 mm. Roller diameter 200 mm. Built-in lifting and lowering cross conveyor with 6 chain strands, can be raised and lowered hydraulically. Completely re-stored before decommissioning. Pedpjt A U Dyefx Alwjrb

Condition: used, For sale: a 3-meter conveyor belt, ready for operation. ✅ Length: 3 m ✅ Belt width: 0.5 m ✅ Transportation can be arranged ✅ Large selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt to meet your needs. Pjdpfoyy Uiasx Alwsrb

Condition: excellent (used), Discharge height: 3100 mm Feed height: 1870 mm Prjdpfx Ajy D Dtcolwob Belt width: 590 mm Cleat spacing: 250 mm Cleat height: 35 mm Total height: 3950 mm The machine is ready for operation Please check my other listings.