Used Cross table for sale (29,714)

Call

Condition: used, Cross table with stepper motor drive Precision positioning systems UHL Cross table UHL Type KT5-NSOC Serial No. 0008002 table size: 145 x 145 mm Table opening: 75 x 75 mm Overall height: 51 mm Travel: 50 mm per axis Straightness / Flatness: 5 ?m - Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimension (cross table) L x W x H: 265 x 220 x 51 mm weight: 3,5 kg very good condition Bfvk3j9m

Listing

Scheeßel

6,837 km

cross cut saw push table

ASP-Automation Elektronik 3000 - 3 TH

€2,900

Welding table T-slot table with cross slots

Call

Condition: not inspected (used), for fast, exact cross-cutting of several timbers at the same time, which can be placed next to and/or on top of each other, max. travel approx. 3.3 m, total table length approx. 4.15 m, total table width approx. 0.85 m, max. clamping height approx. 160 mm, max. timber width approx. 220 mm, positioning drive with 2 electric disc brakes, positioning slide can be swivelled upwards, with 2 pneumatic clamping tongs with 4 spring-loaded clamping fingers each from above, 10 clamping tines from below, for self-assembly on a cross-cut saw Cgxwupvzdx

Advertise now from €2.99*
10 million buyers are waiting for you

Call

Inform now
+44 20 806 810 84

Advertise now

*per listing / month

Listing

Günzburg

6,760 km

SIEGMUND

Call

Condition: new, Table length 2400 mm table width 1200 mm table height 200 mm Machine weight approx. 1235 kg Equipment: Beyr77k9z9d - 4 feet - basic equipment 650 mm - bore Ø 28 mm - high quality steel S355J2+N + plasma nitriding The slotted table has a hole arrangement in 100 mm grid on the table top and a parallel hole arrangement in 100 mm grid on the sides. Additionally it has cross grooves and M10 threaded holes on the side cheek. Thanks to the cross grooves spaced at 100 mm intervals, you can fasten components with slotted holes in any position. For this purpose, threaded clamping bushes and slot nuts are necessary. This is a fair table with slight signs of use.

Listing

Gerolzhofen

6,761 km

Table extension with cross stop

Aigner

€120

Call

Condition: used, No. 5 Aigner table extension with cross stop - kickback protection used storage place 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee Dlm9xx

Discover more used machines

Cross tables

Cross moving table

Floating cross table

Cross table wolfcraft

Wolfcraft cross table

Mitre saws / chop saws

Cross cut optimization

Cross cut destacker

Packet cross cut

Cross cut

Listing

Barntrup

6,855 km

Table Cross-Cut Saw

STROMAB TR 501

Call

Condition: new, Year of construction: 2023, Saw blade feed pneumatic Djv0ov motor power 7,5 KW crosscut cross section max. 280 x 135 mm, or 360 x 55 mm complete with: * 1 mtr. working table each left and right of the saw blade * beveled plate behind saw cut for removal of trim cuts * 2-hand operating device * front saw blade guard * carbide saw blade Optionally available: * Front guard pneumatic (TR501/P) * Upper guard cutting area (TR501/G) * additional roller table per mtr (with roller 60 mm) * manual stop 60 mm * manual stop 250 mm * pneumatic stop 60 mm * pneumatic stop 330 mm * carbide saw blade * laser guide light 220 V

Listing

Wiefelstede

6,930 km

Cross table linear drive

THK KR x/y 410/310 mm

Call

Condition: used, Cross table controlled, cross table NC, coordinate table, LM guide actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel path: x= 410 mm / y= 310 mm Jvvv29b7 -Dimensions: 650/550/H190 mm -Weight: 28 kg

Listing

Enschede

7,009 km

Cross table 600 x 240 mm

Kruistafel 600 x 240 mm

€650

Call

Condition: new, Year of construction: 2022, CROSS TABLE - Dimensions 600 x 240 mm - Table displacement 400 x 150 mm CALL FOR MORE INFO DUTCHMACH METALWORKING MACHINES V7lwkb ENSCHEDE

Listing

Velen

7,005 km

Heavy-duty column drill with NC cross table

WMT LCT 330

Call

Condition: new, table length 330 mm Muw77s table width 220 mm x-travel 210 mm y-travel 125 mm table height 150 mm T-slots 12 mm weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm

Listing

Soest

7,119 km

IBARMIA B-70

Call

Condition: good (used), Heavy duty column drill with NC controlled STYLE cross table and drilling cycle incorporated into control of table. Spindle take-up ISO-40 C0d8hqisvg

Listing

Wiefelstede

(dealership location)

6,929 km

Cross table

Deckel Typ 400x400

€750

Call

Condition: used, Cross table, cross slide table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel: x 50 mm/y 65 mm -Weight: 60 kg Qk7kxf7ty

Listing

Velen

7,005 km

WMT LCT 600

Call

Condition: new, table length 600 mm table width 240 mm x-travel 370 mm y-travel 130 mm table height 165 mm weight 60 kg dimensions 0,8 x 0,45 x 0,2 mm Bhzu7jcpvq

Listing

Wiefelstede

(dealership location)

6,929 km

Cross table

Charmilles 315 x 315 mm

€950

Call

Condition: used, Cross table controlled, cross slide table, clamping table, clamping plate with T-slots, clamping angle Bedc8vaqxd -Transfer: in the current condition as seen -Y axis: measuring rail is defective -Cross table: comes from an erosion machine -Table surface: 450 x 340 mm -Travel: X 280 mm/Y 170 mm -Dimensions: 1000/1130/H950 mm -Weight: 728 kg

Listing

Velen

7,005 km

WMT LCT 425

Call

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm table height 160 mm T-slots 12 mm weight 45 kg Nwxjr dimensions 0,6 x 0,45 x 0,2 mm

Listing

Wiefelstede

6,930 km

Cross table NC

Walko PNC 500

Call

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm B7zu8l9vrb -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Listing

Velen

7,005 km

WMT LCT 225

Call

Condition: new, table length 225 mm table width 175 mm x-travel 120 mm y-travel 110 mm table height 140 mm T-slots 12 mm Nz2yr weight 17,5 kg dimensions 0,35 x 0,35 x 0,22 mm

Listing

Wiefelstede

6,930 km

robot cross table

Berger Lahr x/y/z 670/360/1260 mm

€1,950

Roof Chain Cross Conveyor Stable

Call

Condition: used, Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces Ckxvjdcalc -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Listing

Geiselwind

6,751 km

SAB DKS 8

Call

Condition: excellent (used), Year of construction: 2007, Stable roof chain cross conveyor with 8 chain strands. Length 4.900 mm. Shot width 1.650 mm. Total width 2.450 mm. Tv8ur2i3 Chain spacing: 600 - 600 - 600 - 500 mm. Full sheet metal. Roof chain drivers interchangeable. Ideal under separator chipper plant or also for creel plant.

Listing

Travnik 18, 1318 Loški Potok, Slowenien

6,421 km

Under table crosscut saw

REINHARDT HRK 800

€4,200

ONO plus VAT

Call

Condition: good (used), Year of construction: 1988, Model HRK 800 Brand Reinhardt Length 2200 Width 1800 Height 7bd7lugqub 1650 Voltage 380

Listing

Steinen

6,950 km

Under table crosscut saw Crosscut saw

JRIMAC by Stoll

Call

Condition: new, Year of construction: 2020, sell 1 JRIMAC under table crosscut saw UKS 750 Cross sections: 50x800 - 170x250mm Saw blade: 550mm working height: 850mm Suction connection bottom and top: 160mm - infinitely adjustable, pneumatic cutting feed - hydraulic. Brake cylinder f. uniform lifting speed - pneumatically controlled workpiece clamping device Bjcmawkcka - cut release via 2-hand control, with protective shield - Roller conveyors and stop systems on request

Listing

Κατερίνη

5,736 km

Cross Elephant

CROSS Elephant

€80,000

EXW ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 2012, Operating hours: 100 h, Functionality: fully functional, The Cross Elephant Beet Washer is equipped to de-stone, wash & chop beet. The Elephant can be used for the dirtiest of beet crops to ensure clean and safe cattle feed and also clean samples for anaerobic digestion. This Washer also has a pre-cleaning feature which helps the water last longer per cycle. The Elephant has the ability to remove 100% of the stones in the beet crop. The water in the Elephant can last a lot longer than most of the beet washing range due to the water cleaning system as the machine works. Drive options include Engine, PTO & Electric. Go7ibcewx

Listing

Tatabánya

6,150 km

surface grinding machine

6121-Rotary Table Surface Grinder

€15,000

ONO plus VAT

Call

Condition: good (used), Year of construction: 1993, Rotary table surface grinder, surface grinder, Sumitomo SVR125, used machine Overall dimensions: 4200 x 2300 x 2800 mm Cqlwddmqxk Year: 1993 Weight: 6300 kg Control: Fanuc With emulsion management Power: 44 kW Magnetic table diameter: 1250 mm Magnetic table capacity: 1400 kg Magnetic table rotation speed: 5-25 rpm Grinding wheel diameter: 660 mm Grinding wheel speed: 720 rpm Feed speed: 1-300 mm/min

Listing

De Rijp

7,148 km

Wrapper

Cross Wrap CW6575

Call

Condition: good (used), Year of construction: 2009, Wrapper including 4 conveyors Fabrikant; Cross Wrap Type: 60 square bale wrapper Cyh83px3m8 Build in: 2009 Dimensions: 19,5 x 3m x 3m Engine: 22 kW Electric motors: 3x

Listing

Wiesbaden

6,914 km

Self-levelling cross line laser

Self-leveling cross line laser WÜRTH

Call

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Sta9dc Weight: 485 g

Trust Seal

Through Machineseeker certified dealers

Listing

7,118 km

Bale Opener Line for RDF and MSW

Cross Wrap Oy BO 4000

Call

Condition: used, Year of construction: 2015, Operating hours: 24 h, Technical data of the bale opener line: Bunpcujrrd Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- ?. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Listing

Salzgitter

6,770 km

Various mores

Table with Foilrolls Holder

Call

Condition: like new (used), (Table with the possibility of hanging film rolls) 8t7auwsvfo

Listing

Κατερίνη

5,736 km

Cross Rhino Beet Washer & Chopper

CROSS Rhino

€70,000

EXW ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 2012, Operating hours: 80 h, Functionality: fully functional, CROSS Rhino Machine Beet Washer, De-Stoner & Chopper mainly for beet use. Can also be used for potato cleaning & chopping, or other agroindustrial product. Bii2jqw92gr

Listing

Roller conveyor with chain cross conveyor

Karlholmsbruk

6,477 km

Rip and cross saw REMA DMLK 30

Roller conveyor with chain cross conveyor

Call

Condition: used, Roller width: 1200 mm Roller conveyor with chain cross conveyor for board pack transportation - Roller width: 1200 mm, - Chain rail length: 3,7 m, - Total chain rail amount: 7 pcs. Cx3282vnpa - Chain conveyor with air suspension.

Listing

Rip and cross saw REMA DMLK 30 Rip and cross saw REMA DMLK 30

Kłodawa

6,452 km

Rip and cross saw REMA DMLK 30 Rip and cross saw REMA DMLK 30

Call

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net Blomrmqleg dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Listing

Karlholmsbruk

6,477 km

Chain cross conveyor

Call

Condition: used, Length: 2,7 m Width: 6 m Rgo2fsbb Height: 1,1 m Electric motor: yes

Listing

Karlholmsbruk

6,477 km

Chain cross conveyor for boards

Call

Condition: used, Chain cross conveyor for boards - 7 rails, - Electric motor: 1,1 kW. 9fmw0gfwhd

Listing

Karlholmsbruk

6,477 km

Roller conveyor with chain cross conveyor

Call

Condition: used, Roller conveyor with chain cross conveyor Can be used after resaw. - Electric motor: 1,1 kW Roi37 - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Listing

Karlholmsbruk

6,477 km

Board pack lift

Lifting table Kraus AX

Call

Condition: used, Year of construction: 1998, Length: 5 m Wide: 2 m Board pack lifting table with hydraulic station and control system. - length: 5 m Pzmszy - wide: 2 m - lifting capacity: 2 tonns - year of manufacture: 1998

Listing

București

5,510 km

Rotary table

2200x2200mm

€7,500

Table Type Boring and Milling Machine

Call

Condition: good (used), Year of construction: 1980, Rotary table 2200X2200mm Cafdsath7 Made in France

Listing

Wien

6,310 km

TOS WHN 13 CNC

Call

Condition: used, Year of construction: 1991, spindle diameter 130 mm x-travel 3500 mm y-travel 2000 mm z-axis 1250 mm w-axis 800 mm b-axis 360 ° output 85 KVA table-size 1800x1800 mm table load 12 t spindle taper ISO 50 table rotation 360x0,0001 ° Binyuicm097 spindle motor 37 kW spindle turning speed range 1500 U/min feed range 4-8000 mm/min electrics - voltage/frequency 400 / 50 V/Hz weight of the machine ca. 35 t dimensions of the machine ca. 7x7x6 m

Listing

Bacău

5,494 km

table boring mill

Shibaura BT 10b

Call

travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, spindle speed (min.): 13 rpm, spindle speed (max.): 1,000 rpm, total height: 300 cm, total length: 500 cm, total width: 320 cm, input power: 11 kW (14.96 PS), table length: 1,250 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,100 mm, Condition: excellent (used), Year of construction: 1988, Spindle: Spindle Taper: ISO # 50 Spindle diameter: 110mm K38quxenht Spindle Speed: 12.5 - 1000RPM Spindle Travel: 700mm Headstock Travel (Z axis): 1000mm Table: Table dimensions: 1250 x 1100 mm Table Cross Travel: 1000mm Table Longitudinal Travel: 1000mm Power: Main motor: 11 kW Rapid Feed motor: 1.5kW Total Power Supply: AC380/ 50A Overall dimensions (LxWxH): 5000x3200x3000mm Machine weight: 10000 kg

Listing

Radom

6,026 km

Hard cover assembly table

Fastbind Casematic H32 PRO

Call

Condition: good (used), Fastbind Casematic H32 PRO hard cover assembly table Very good condition, ready to work. This is the best-equipped table from the Fastbind brand offer. Technical data: Max. working area: 740 x 370 mm Max. dimensions of the finished cover after opening: 700 x 330 mm Max. dimensions of the finished cover when closed: 330 x 330 x 40 mm Max. bending length: 700 mm Power supply: 230V Machine dimensions: 550 x 840 x 200 mm Weight: 34 kg Bigmk797koy Equipment: – table with suction – backlight – module for wrapping the wrapper

Listing

Hisar, Bursa Yalova Yolu No:7, 16600 Gemlik/Bursa, Türkiye

5,179 km

DOUBLE TABLE CNC VERTICAL MACHINING MACH

AKIRA A 650

€30,500

EXW Fixed price plus VAT

Call

Condition: used, Year of construction: 2007, AKIRA A-650 FANUC Oİ-MC DOUBLE PALLET X AXIS 600 Bgacp9h0lri Y AXIS 300 Z AXIS 400 ATC ARM TOOL CHANGE (24 PACK MAGAZINE BUT THERE ARE LACKS) WITH CHIP CONVEYOR

Listing

Blintendorf

6,445 km

Rotary table grinding machine

WMW VEB SFSR 1000

Call

Condition: ready for operation (used), Year of construction: 1975, VEB Maschinenfabrik "John Schehr" Meuselwitz Type:SFSR 1000 table size 1000mm Bimoazpgawn Segment head Further information including hydraulic unit and suction unit

Listing

Halberstadt

6,724 km

CNC - Table boring mill

UNION BFT 93/5-2

Call

Condition: used, Year of construction: 1998, Ref. -No.: 10354 Manufacturer: UNION Type: BFT 93/5-2 Year of construction: 1998 Retrofit: 2000 Biobedl79te Type of control: Digitale Steuerung 2D Control: HAIDENHAIN TNC 135 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 1600 mm Y-Travel: 1250 mm Z-Travel: 1475 mm Spindle stroke: 710 mm Table Dimensions (Lengthxwidth): 1250x1400 mm Spindle Speed: 1600 RPM Drive Capacity - Spindle Motor: 30 kW Total Power Requirement: 35 kW

Listing

Volkach

6,769 km

Jogger table

Müro A3

Call

Condition: used, Year of construction: 2005, offer consists of: Müro jogger table 43x43 ST - 43 x 43 Isrqoai - power: 230V, 50Hz, 70W, 0,8A - weight: 35kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Listing

Emskirchen

6,733 km

Folding Machine - 16 Pages Cross Fold

Heidelberg Stahlfolder KD 78-4-KZ

Call

Condition: used, Year of construction: 1999, machine/vehicle number: 103638-258036, Falzmaschine / Folding Machine Heidelberg Stahlfolder KD 78-4-KZYear 1999 - Serial-No. 103638-258036 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 3 Schwerter links/rechts Auslage / 2. Station 3 knives left/right delivery Stehendbogenauslage / Delivery Stacker Stahl SBP 46 Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals includedOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Cb0n9cyf7w On Stock Emskirchen / Nürnberg - Can be test

Listing

Radom

6,026 km

Folding machine

Horizon Cross Folder AFC-492

Call

Condition: good (used), Horizon Cross Folder AFC-492 folding machine Machine in very good condition, ready to work. Technical data: Maximum format: 490 x 648 mm Minimum format: 105×174 mm Paper weight: 35-160 gsm Max working speed: 20000 sheets/h Weight 700kg 2x folding cassette, with mowing function 1x electronic cutter for cross-folding Electronic counter with the function of packaging, displaying the current speed of work. Smooth speed control on the inverter. Soundproofing covers. Electronic delivery with smooth regulation of sheet delivery. The machine comes with a creasing kit. Squeegee feed plus end-of-sheet feeder. Bef3xni Tools, additional elements and documentation included. Structure mounted on wheels for easy movement

Listing

Kreis Bergstraße, Deutschland

6,882 km

Linear Table 340 x 220 mm -Stroke 115 mm

SCHNEEBERGER unbekannt

€480

Hydraulic table-top single-column press

Call

Condition: used, No. 2178 1 used linear machine table make SCHNEEBERGER working: table top 340 x 220 mm, needle cage bearing linear guides, table top adjustment 115 mm, 3nyi9ghqt spindle pitch 4 mm scale division 0,05 mm, base plate 220 x 260 mm. Clamping possibility on/in the table top through 4 x M-10 thread, distance 120 x 280 mm

Listing

Mörsdorf

6,664 km

VVB Zeulenroda 7-8 t

Call

throat depth: 190 mm, pressing force: 8 t, table width: 220 mm, table length: 340 mm, Condition: used, Hydraulic table-top single-column press made by VVB Zeulenroda Technical data: Pressing capacity approx. 7-8 tons Table size 220 x 340 mm throat 190 mm 7fhrqyr Stroke 250 mm Installation height 350 mm Ram diameter 90 mm External dimensions L x W x H 700 x 400 x 2000 mm Weight approx. 800 kg used, in good condition

Listing

Karlsbad

6,891 km

Laser table marking machine

DECKEL-MAHO SAUER LASERTEC 40

Call

Condition: used, Year of construction: 2001, x-travel:400 mm Qzhdl y-travel:300 mm z-travel:500 mm table clamping surface::400 x 300 mm table load:50 kg semi-automatic operated:LASERSOFT 3D laser capacity:100 W total power requirement:27 kVA weight of the machine ca.:2,5 t dimensions of the machine ca.:3 x 3,5 x 2,8 m CNC engraving/texturing/labeling/contouring-laser maschine, approx. 9.000h "machine on", approx. 5.500h "laser on"

Listing

Volkach

6,769 km

Criss Cross delivery unit

Horizon CR-14

Call

Condition: used, Year of construction: 1996, offer consists of: Criss Cross delivery unit suitable for: Iqek73teb Horizon AC-8000 Horizon AC-6000 Horizon MAC-8 - Sheet Size: max. 148 x 210 mm to 318 x 410 mm - Pile Sheet: max. 120 mm - Criss Cross Mechanism: Cam mechanism in sync with collating signal from collator - Power: 100 V/60 W Connected to AC-6000, AC-8000S or AC-8300 - Dimensions: 570 x 500 x 380 mm - Weight: 20 kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Listing

Δέλτα 570 08, Ελλάδα

5,712 km

DOUBLE CROSS CUTTING MACHINE A COSTA

A COSTA RIGHI MAMMOTH

€21,500

Back table cover Polar 92 EM

Call

Condition: repair required (used), CROSS CUTTING LENGTH min 800mm max 2500mm Biloefdp0h8

Listing

Emskirchen

6,733 km

Polar 92 EM

Call

Condition: used, Back table cover Polar 92 EM-Online-Video-Inspection by Skype-Video-  -We would be very pleased with your visit - more machines on Stock-  Dmhxdt -Available Immediately - Can be inspect-  -On Stock Emskirchen / Nürnberg - Can be test-

Listing

Augsburg

6,711 km

Aluminum vacuum table with vacuum pump

Briwatec Rubin 135 H

€500