Used Conveyor Systems for sale (42,334)

Condition: used, Year of construction: 2009, A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute. Technical data baler: Manufacturer BOA Type Impress D130.110.B.5-(5R).1.6 Year of construction 2009 Press power main press 127 tons Specific press capacity 10,7 kg/cm² Working pressure 280 bar Feed channel 1.620 x 972 mm (l x w) Press volume / cycle 4,1 cbm Volume throughput without load up to 865 cbm/hour Cycle time under operating conditions 22 sec. Press stroke 2.900 mm Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving power 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm up to 17 to/h bulk weight of 50 kg/cbm up to 29 to/h bulk weight of 100 kg/cbm up to 37 to/h bulk weight of 150 kg/cbm up to 51 to/h Bale weight up to 1.200 kg Volume hydraulic oil tank 1,850 L SPS controller Siemens S 7 Operating panel SiemensToughscreen Multi Panel Transport dimensions baler approx 12.741 x 2.400 x 3.360 mm (l x w x h) Machine weight baler approx. 50 tons Technical data for the conveyor belt Manufacturer BOA Type 1700 HBS 32° KTH 11000 x 13076 x 1500 Year of construction 2009 Drive power 11 kW Variable belt speed Feed conveyor length 11,000 mm Length of ascending belt 13,076 mm Pitch 32° Useful width 1,700 mm Height of side wall of infeed conveyor, inside 800 mm Height of side wall of ascending conveyor, inside 500 mm Pit dimensions to conveyor belt 14,616 x 3,550 / 2,150 x 1,750 mm (l x w x d) C90M9Le Comments: As you can see from the photos, this machine has some signs of wear that should be repaired and removed before it is used again. A basic maintenance and partial overhaul is recommended. The cylinder tube of the main hydraulic cylinder has a hairline crack and should definitely be replaced. The machine is expected to remain in single-shift operation until end of 2024 and will then be replaced by a new press with conveyor belt. An inspection of the machine during operation, including the use of materials, is possible by appointment. We accept no liability for the technical details or any errors.

Condition: as good as new (ex-display), Year of construction: 2019, Bunker Type BRB 1200 * 5000 Belt width - 1200 mm. Belt length - 5000 mm (shaft distance) Drive power - 7,1 kW Belt speed - 1 - 4 meter/minute - The motor is equipped with a frequency inverter for adjusting the belt speed Ingress Protection - IP-65. Material rubber belt - Type EP500/3, 6+2 Total thickness 8,8mm. Wear resistant. Incline Belt Type TBM 1200 * 8500 Belt width - 1200 mm. Belt length - 8500 mm (shaft distance) Drive power - 3 kW Belt speed - 40 meter/minute Ingress Protection - IP-65. Material rubber belt - Type 400/3, 4+2, in 3 layers with a top and bottom layer, total thickness 8.8 mm, wear-resistant. Fitted with cleats (material is fed up well, there is a risk of contamination) Dnbgywagz Semi-Mobile rugged skid Height: 2560 mm. Width: 2430 mm. Length: 9960 mm. Switchbox Switchbox for bunker belt and incline belt

Condition: good (used), Functionality: fully functional, Roll width: 410 mm, Power: 0.12 kW (0.16 HP), Roll spacing: 60 mm, Axle spacing: 110 mm, Drive type: Motorisiert, Roller conveyor curve/ curve 90 degrees Manufacturer: Soco System Condition: Used Model: Rollers Type: 90°degree Total width outside: approx. 1430 mm Total width inside: approx. 820 mm Total width incl. motor: approx. 580 mm Conveyor width: approx. 410 mm Roller spacing: approx. 60 mm Center distance: approx. 110 mm Roller type: Plastic Material: Steel/plastic Color: Galvanized, light grey, orange Including 2 motors Soco 0.12 KW In stock: 4 pieces Price per piece Do00U7 The conveyor technology has run until dismantling. Condition: fully functional, with signs of use Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry, trade or Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: like new (used), Year of construction: 2020, Operating hours: 18 h, Functionality: fully functional, Selling an almost unused conveyor belt for the injection molding industry. The conveyor belt only ran for 18 hours. It has a fixed speed of 4 meters per minute. The noise does not come from the conveyor belt, it is very, very quiet. The conveyor belt is freshly cleaned! You can hear injection molding machines in the background. Total length: 2500 mm Feed belt length: 1200 mm Climbing belt length: 1300 mm Useful belt width: 350 mm Customs tariff no.: 8479 8997 Cumdc9Pcmc Original invoice enclosed.

Condition: new, Bar Transferred Conveyor Systems Bcztonqkax These are conveyors which provide to be manually or automatically transferred among required processes until completion of the surface finishing and painting processes after the product to be painted is hung to the conveyor. Application of the processes can be carried out automatically based on the demand and the project. It provides a considerably high space and energy saving compared to continuous conveyor systems used in the facility where full automatic systems are operated. Based on the product weight, closed type Cardan and IPN rails can be used. • These conveyor systems, which have a wide range of carrying capacity, can move manually or semi-automatically vertically and horizontally, allowing the bar transport between processes. • This system provides higher efficiency in smaller installation spaces with low fuel consumption. • It works in the Power & Free conveyor logic, but is less costly and semi-automatic. • It is easier to hang heavy items on the moving bar with the elevator unit that can be integrated into the system.

Year of construction: 2016, Condition: used, Functionality: fully functional, On offer is a draining belt from the company Transportanlagen Ryll Bj.2016 the belt has a length of 310cm and a width of 80 the height is currently from 70cm to 130cm (inclination adjustable) total length of the system is 370cmx160cm. The belt runs on 400V and the speed is infinitely adjustable. More on request. Cash payment or prepayment. Biln8Sjolgc Sale only to traders, no guarantee, no warranty

Condition: new, POWER&FREE CONVEYOR SYSTEMS Overhead Power & Free Conveyors have free trolleys that are driven by power chains and carriers that transport the material to a given location. Nf8Ir The carriers are attached to the free trolleys and are normally engaged to the power chain by an attached pusher dog assembly on the free trolley. The pusher dog can be disengaged by a cam action in either the free trolley or the chain dog, caused by accumulating behind another free trolley or by engaging a stop blade. The chain continues to move while the carrier becomes temporarily stationary until the free trolley becomes re-engaged with the chain. Applications Accumulating Assembly Bias & Trias Banking Carrier Indexing Elevation Changes Production Rate Variation Sort Start/Stop Storage Transfer Advantages: High strength alloy castings increase life span Stainless steel chain pusher dog Modular designed conveyor components Stops are simple, compact and corresponding to industry standard Computer or programmable control systems Not possible in standard hanger conveyor systems: • Automatic stop and start of the system with the support of switches and sensors • Transferring the transported material to different directions with the help of the scissors on the rails. • Transport at different speeds in different parts of the conveyor • You can easily perform its controls with the PLC control system integrated on the system. • As long as possible, our designs are made by our expert engineering team with the principle of saving more time for your production, establishing an economical system that requires the least maintenance.

Condition: new, Cardan type conveyors are trolley models consisting of 4 bearing groups moving in a closed rail. These types of conveyors are indispensable on lines with their vibration-free movement, automatic lubrication feature and good appearance. Cardan type drive unit is overhead caterpillar type or lateral gearing torque safe. Pitches between the chain hangers are 400 mm and its multiples. Through central lubrication unit on the system, chain bearings automatically perform lubrication process as desired time interval. Torque limiter is used in order to protect the conveyor system when the drive units are compressed and forced. The bearings mounted on the chain are capable of operating at 250°C. The conveyor chain tensioning system can be performed as spring or screwed. The cardan conveyor rail is particularly bent from the sheet. In long-line conveyor systems, more than one drive unit is used and in such systems, a synchronous operation is provided between the drive units. There are three types as Light Type - Medium Type - Heavy Type based on the need. • Cardan type conveyor is based on moving the cardan chain in three axes on the cardan rail. • Cardan Type Drive unit as: Top caterpillar type or Side gear with torque safe system. • The pitches between chain hangers are 400 mm and its multiples. • Thanks to the central lubrication unit on the system, the chain bearings automatically lubricate at the desired time interval. • Torque limiter is used to protect the system from jamming and forcing of the drive units to protect the conveyor system. • The bearings mounted on the chain are capable of operating at 250 degrees. • Conveyor chain tensioning system is made with spring or screw. • Cardan conveyor rail is specially bent from sheet metal. • In long line conveyor systems, more than one drive unit is used, in such systems a synchronized operation is provided between the drive units. Bcztmbg7Ap • There are three types according to the needs.

Year of construction: 2005, Condition: not inspected (used), Scraper conveyor: 5m Width: 0,55 m Height: 0,5m Inner width: 0,38m Carrier divide: 500mm Belt incline: 30° Drop height: 2,5m with swivelling slewing ring without engine Nlegh

Condition: excellent (used), ROLLER CONVEYORS & LENGTH STOP SYSTEMS 2000mm Cmvcoyuh

Year of construction: 2016, Condition: excellent (used), ROLLER CONVEYORS & LENGTH STOP SYSTEMS RO 2m + RLK 2m Y7Cry8Br

Condition: excellent (used), Year of construction: 2012, Wöhrmann Box transport system. Used but in very good condition. Can only be sold complete. Bgqr7G9Hfak Everything made of stainless steel and of very good quality. For more information please call us. Bos Technical Support import-export packaging machines. Sorteermachine eiersorteermachine gradingmachine sortiermachine sortieranlage eierverpackungsmachine Moba, Staalkat, Prinzen, Rational, Kletec

Condition: as good as new (ex-display), Year of construction: 2020, Functionality: fully functional, Machine/vehicle number: L332648, Total length: 660 mm, Total height: 1,440 mm, Total width: 610 mm, Type of input current: AC, Overall weight: 150 kg, Input voltage: 230 V, Warranty duration: 6 months, Input frequency: 50 Hz, Laser power: 400 W, Ambient temperature (min.): 20 °C, Ambient temperature (max.): 25 °C, Worktable width: 170 mm, Worktable length: 170 mm, Power: 0.5 kW (0.68 HP), We would like to inform you about our special discount offer for an used DWS029 XC version 3D printer from DWS (Digital Wax Systems). The offer is based on a first come first serve policy. Boa90Skoi This printer was delivered to a Thai customer in 2020.06 The customer did not use it a lot and sold it back to us because he did not have enough 3D orders. It was refurbished 2023-10 in Italy at DWS with a new laserbox (still in warranty until 204.10) The printer has all accessories (Labtop, ????) and can be bougt for 40,000 Euro FOB Bangkok. Main Features Very high resolution and precision Fully digital and automated workflow Increased productivity Reduction of costs and production times Complies to Industry 4.0 TTT System - Tank Translation Technology that optimizes the wear of the resin tank Low maintenance costs Specs Technology: Laser Stereolithography Working Area: 170 x 170 x 200 mm Laser Source: Solid State BlueEdge® Slice Thickness: 10-100 microns (depending on the type of material used) Scanning Method: Galvanometer Software: Nauta®+ and Fictor® included Input File Format: .stl, .slc, .nauta, .fictor, .mkr, .3dm, 3ds, .ply, .obj, .lwo, .x Machine Size: 610 x 660 x 1400 mm Weight: 150 Kg Operating Temperature and Humidity: 20°-25°C / 60% Power Supply: AC 230V / 50 Hz Electrical Consumption: 500W PC Minimum Requirements: External PC & 16" screen included Windows 11 pro, 3 GHz processor, 24 GB RAM I/O Interfaces: 1 USB port - 1 Ethernet TCP/IP port Connectivity: 1 Active internet connection If you are interested just contact me for further details. Sample prining can be done.

Condition: excellent (used), Year of construction: 2018, Operating hours: 500 h, Functionality: fully functional, The ProJet 860 is the largest in its series of powder 3D printers from the American manufacturer 3D Systems. The max size of the printed object can go up to 50 cm (dimensions: 23 hight, 38 width, 50 length). The machine uses white powder mix and produces objects in gypsum in full colours. Very suitable for figurines and architectural models, among other items. Dpqwqh

Condition: good (used), Input voltage: 380 V, Conveyor belt, conveyor, Adjustable conveyor belt B8Wfvf7Z Conveyor belt, conveyor, Adjustable conveyor belt, Used machine Manufacturer: Mass International s.r.l Model: NC003009 Dimensions: 3200 x 980 x 1440 mm 380 V - Height and inclination are adjustable - Portable, equipped with wheels - Belt size: 3300 x 750 mm; horizontal side: 1740 mm; inclined side: 1380 mm - Lamella distance: 520 mm

Condition: ready for operation (used), Year of construction: 1996, The object of my auction is a belt conveyor of length 4.5m tape width 0.65m Possibility of transport. Möglichkeit des Transports. Udwihbjoad

Condition: ready for operation (used), Year of construction: 1999, Priced to go, we need space on the floor Nxmz3J0R3Z Max sheet size 1400 x 1640 Open flute ready pressure belt

Condition: good (used), Functionality: fully functional, Recipe scale Model: Defender 3000 Xtreme W with Gebert Systems Model: RezeptaLibra 1.17 Gogaho Stainless steel frame mobile 230V connection Dimensions: 450 x 750 x 1500 mm, WxDxH Used appliance cleaned More bakery machines in stock

Condition: used, Belt conveyor IDL000790 - length: 3100 mm, - width: 380 mm, - electric motor: 0,25 kW. Iswb20E

Condition: new, Conveyor belt length: 22,000 mm, Conveyor belt width: 3,750 mm, Overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. G0Kevhyy Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: ready for operation (used), Year of construction: 1996, The object of my auction is a beltline length of 10.2m tape width 0.5m Possibility of transport. Möglichkeit des Transports. Udwdsa7Ror

Condition: used, Belt conveyor IDL000789 - length: 9 m, - width: 800 mm, C93Amyi - electric motor: 0,75 kW.

Condition: ready for operation (used), Year of construction: 1996, The object of my auction is a beltline length of 3.2m belt width 0.65m Possibility of transport. Möglichkeit des Transports. Udv7Bngp3L

Condition: ready for operation (used), Year of construction: 1996, The object of my auction is a belt conveyor of length 6.5m tape width 0.35m Ubttpxc0Up Possibility of transport. Möglichkeit des Transports.

Condition: ready for operation (used), Year of construction: 1996, The object of my auction is a beltline length of 4.7m tape width 0.3m Ubtrudxvt2 Possibility of transport. Möglichkeit des Transports.