Used Ctx 400 for sale (17,653)

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Kodpfx Abeuix Sgocslp Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: new, Year of construction: 2022, Cutting length: 2500 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut fence: 2550 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: electric Display saw blade angle: digital Display cutting height: Digital Display width stop: Digital Ksdpfxoid Igqo Abcelp Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 1000kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: electric Display saw blade angle: digital Kledpfxehpl Uns Abcsp Display cutting height: Digital Display width stop: Digital Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 1000kg

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment Klodpfx Abed N H A Njcjp - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Klodpfx Abjd Rmcmocop Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Kodpfsh Hvk Ajx Abcslp Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, Year of construction: 2007, CNC Turning-Milling Center CTX 410 - Year 2007 Heidenhain Plus IT control - 3-jaw chuck - Driven tool stations - Tailstock Kedpfxjxy Nqcs Abcjlp - Chip conveyor - Coolant tank

Condition: good (used), Year of construction: 1975, throat depth: 400 mm, pressing force: 250 t, table width: 750 mm, table length: 1,000 mm, overall weight: 16,000 kg, ram plate width: 500 mm, ram plate length: 630 mm, Pressure: 250 t Kledpjyvyw Isfx Abcep Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: ready for operation (used), total height: 4,900 mm, total width: 5,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), empty load weight: 85,000 kg, load capacity: 4,00,000 kg, Portaalrichtpers 400 ton Model: GANTRY-400T Voor het gericht van assen, gietstalen producten, gewalste producten, smeedstukken met vrije matrijs, vlak staal maar ook voor het in- en uitpersen van lagers, bussen, krimpringen,... 14 individuele tegendrukcilinders in de tabel - 3 ton dop per cilinder - 100 mm slak per cilinder - Druk 300 kg/cm² - Doorgang tussen de staanders: 3990 mm Werksnelheid – bij max. druk: 2 mm/sec Terugloopsnelheid: 50 mm/sec Sluitsnelheid: 30 mm/sec Max ram adjustment: 1550 mm Kledpfjyt S Uxex Abcsp Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: used, mileage: 2,855 km, power: 420 kW (571.04 HP), first registration: 11/2025, fuel type: diesel, maximum load weight: 16,445 kg, overall weight: 27,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, color: silver, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: air, Year of construction: 2022, Equipment: air conditioning, cruise control, navigation system, onboard computer, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it is converted at the current daily exchange rate. The vehicle location currency is decisive. Axle configuration 6x2 ENA, Predictive Powertrain Control, air-suspended front axle, remote control for air suspension, tire pressure monitoring, frame overhang 1950 mm, wheelbase 4900 mm, M-cab, M-cab, cab width 2.30 m, air horn, MirrorCam, locking system with central locking, automatic climate control, driver's air-suspension comfort seat, reversing warning system, rain sensor, LED tail lights, lane keeping assist, distance assist, attention assist, traffic sign assist, blind spot assist, cruise control, navigation system, Mercedes-Benz OnRoadService, 6x2 ENA. Kodpfxeyvl I Se Abcjlp

Condition: used, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). Kodpfxsywddzj Abcelp Iveco S-Way 400 4x2 Refrigerated Box with Tail Lift Axle configuration: 2 axles, rear-wheel drive, cab version "Active Day" with standard cab, engine: Cursor 9, 400 HP, Euro VIe, 12-speed HiTroniX automated transmission, permissible gross weight 18-20 t, single reduction drive axle, single axle, full air suspension, disc brakes, vehicle set-up ON, wheelbase 6,300 mm, CEE type plates, engine speed 2200 rpm, standard oil dipstick and oil filler neck on the transmission, engine plate, steel rims, standard reverse gears, speed limiter 90 km/h, manually operated cab tilting device, halogen headlights, black decorative film on doors, AD cab with flat roof, front underrun protection for chassis with gross weight over 7,490 kg, first aid kit, plastic bumper, black cab attachments, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, electronic immobilizer and second vehicle key, rear wall storage with 2 compartments, digital EC tachograph 4.1, static passenger seat, air suspension on rear axle, Hi-TroniX 12TX 1810 TD, air suspension on front axle, COC full type approval, 2 wheel chocks, batteries mounted horizontally on the frame, standard air tank plates, alternator 2160 Watt (24V x 90A), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, moderate climate version, standard execution, chassis frame in grey, digital VIN code, APU pressure relief to atmosphere, standard total train braking system, steel air tanks (number depends on suspension and trailer version), standard applications, stabilizer front axle, exhaust pipe to the left, VIN manufacturer index ZCF, emission standard EURO VI E, rear underrun protection omitted, 290-liter aluminum fuel tank, 50-liter AdBlue tank, heated fuel pre-filter with separator, standard transmission mode, ECO-switch for switching from power to eco mode for optimized TCO via fuel-efficient engine and gearbox configuration, VDI interface (Vehicle Data Interface) for telematics services (FMS), version 4.0, gearbox software ECO-Roll (freewheel function), driving style analysis (DSE), adaptive cruise control, lane departure warning system (LDWS), warning triangle as per ECE-27, standard taillights, electronic stability program (ESP), advanced emergency braking system (AEBS), DRIVE T. 315/70R22.5, mechanical roof hatch, fog lights including cornering/turning light, transparent sun visor mounted outside on cab roof, air horn behind bumper (compressed air), ashtray in center console, electrical pre-wiring for tail lift operation according to VEHH standard, front axle weight variant 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg), reinforced rear axle stabilizer bar D 60 mm, battery disconnect switch in the cab, electrically operable, 225 Ah batteries, no jack, 2-cylinder air compressor 630 cc, standard drive height, battery charging socket, terminals, rear axle ratio: i 3.08, trailer socket for 24V operation (15-pin), trailer hitch Ringfeder brand, trailer version for continuous brake system operation, rear cross member, D-value: 130 kN, trailer coupling, 40 mm, ...

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 640 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 67,000 W, total height: 2,591 mm, total width: 2,199 mm, overall weight: 21,000 kg, product length (max.): 6,300 mm, tool weight: 5,000 g, swivel angle B-axis (max.): 360 °, swivel angle C-axis (max.): 360 °, number of axes: 4, This 4-axis Index G 400 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight up to 300 kg. Equipped with a high-speed milling spindle at 6000 rpm and a main spindle speed of 3000 rpm, it offers robust machining capabilities. Consider the opportunity to buy this Index G 400 horizontal turning machine. Contact us for more information. Kledpsx D D Ecjfx Abcjp Main spindle 0102 direct driveMaximum material throughput: 102 mmMaximum speed: 3000 rpmFront bearing diameter: 170 mmVariable hollow shaft motorPower at main spindle D102:Power at 100/40% duty cycle: 53 kW/68 kWTorque: 675 Nm/900 NmWork spindle alignment and switching device D1022.5° increments via indexing discHydraulicly actuated hollow clamping cylinder D102 with analog clamping stroke monitoringMaterial clearance: 102 mmStroke: 48 mmMaximum clamping force (tension/compression): 10,900 dNMulti-clamping pressure deviceClamping pressure adjustable from 8 to 80 bar via a multi-stage parts catalog for the main spindle clamping cylinder. Chuck release movement required for transitioning to a lower clamping l carrier 1 (standard equipment)Cross slide X, Z, turning length 2000 h internal coolant supply and shut-off valve, ball screws D=40 mmin the X-axis, D=50 mm in the Z-axis. Axis drives protected by overload clutches, counterweight in the s X ZWorking travel mm: 320 2000Rapid traverse speed m/min: 20 40Feed force N: 14000 14000X-axis measuring system: Glass scale (absolute)Z-axis: ROQ encoder (absolute)X-Y-Z-B housing (WT1)Turret with AC motor, positioned by spur gears, hydraulically lockedY-axis quill, hydrostatically mounted, lockable via spur gearsBall screw, D=40 mmOverload clutchTravel: 220 mmRapid traverse speed: 12 m/minFeed force: 24,000 NROQ encoder (abs)B-axis drive with AC motorSwivel angle: 360°Tool drive unitwith two clutches:Maximum speed: 6,000 rpmPower (25%) at n= 6,000: 17 kWMaximum torque (25%): 37 NmDisc turret with 12 stations on cross slide 1Tool holder system DIN 69880-40x63Increased repeatability during tool changes due to additional W-slotsMultifunction unit on cross slide 1Maximum speed: 6,000/1,500 rpmGearbox: i=4Torque: 36/144 NmTools: SK50Front bearing diameter: 75 mmInternal coolant feedthrough, disc spring clampingTool carrier 2, right - X, ZTurning length 2000 mm, preferably oncounter spindle machine with internal coolant supply and shut-off valve, turret control via AG motor, ball screws D= 50 mm for Z-axis, D= 40 mm for X-axis. Axis drives protected by overload clutches, counterweight system in ret head oriented to the right towards the counter s X ZTravel mm 210 2000Rapid traverse speed m/min 20 40Feed force N 8600 14000X-axis measuring system: glass scale (abs)Z-axis: ROD encoder (abs)Disc turret with 10 on cross slide 2Tool holder system DIN 69880-40x63Increased repeatability during tool changes thanks to additional W-slotsPositioned by face gearing, hydraulically lockedCounter spindle D102, size 11-DIN 55026/55021 and ISO 702/1Turning length 2000 mmZ-axis slide driven by AC motor and 50 mm diameter ball screwAxis drive protected by overload clutchIn the working position, the slide is held against the stop by the AC motor.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, This 3-axis Mazak VC PRIMOS 400S was manufactured in 2016. This vertical machining center features a table size of 1500 x 670mm, a maximum load capacity of 1300kg, and a spindle speed of 20,000rpm. It includes a tool magazine with 20 places and 2 pallets. Ideal for precision machining, buy this Mazak VC PRIMOS 400S vertical machining center. Contact us for further details regarding this vertical machining center. Machine Benefits Kodoyi El Njpfx Abcjlp Technical Machine Benefits • Rapid feed x-y-z 60 m/min • Table size 600 x 400 mm • Tool magazine 14 positions/ tool shank bt-30 accessories/chip conveyor

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing Klsdpfx Abeyg I Ihjcop • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Year of construction: 2015, condition: ready for operation (used), This Zoller smile 400 optical measurement machine was manufactured in 2015. It features a 24V power distribution system, a lighting module Z100-L, and a high-precision spindle SK 50 with a runout accuracy of 0.002 mm. It also includes a 17" panel PC, USB camera with integrated LED lighting, and a servo motor with encoder. Consider the opportunity to buy this Zoller smile 400 optical measurement machine. Contact us for more information. • 24V power distribution with fuses • USB motion controller • ZOLLER measuring instrument control • 11th generation 17" panel PC • Printer for TH labels • Printing width from 25 mm to 108 mm • Membrane keypad for "smile2" with 3 buttons • High-precision spindle SK 50 • Runout accuracy 0.002 mm • Accessory kit for clamping unit "smile" • USB camera with optics and integrated LED incident light • Transmitted light "pilot" DLR / V-series • Servo motor with encoder and pinion • Software version: Pilot 1.14.18.0 Kljdpfxsx Tkbls Abcsp

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,252 h, spindle speed (max.): 4,000 rpm, spindle motor power: 17,500 W, controller manufacturer: SIEMENS, controller model: 840D SL, number of axes: 2, This DMG CTX 450 V3 horizontal turning machine was manufactured in 2014. It features a Siemens 840D SL CNC control, a 12-position VDI 40 tool turret with driven tools, and a high-torque main spindle. The compact design includes side chip discharge and a heavy-duty hydraulic tailstock. Ideal for high-precision turning, it also has a bar machining capability with a maximum bar diameter of 65 mm. Contact us for more information about this machine. • Control: Siemens Sinumerik 840D SL with ShopTurn; Ergonomic SlimlinePanel; Ethernet and USB data transfer; graphical support; ProgressLine & PlanOnLight; electronic cycle-time and part-count display Klsdpjx E Eaaefx Abcsp • Tool system: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); possibility to mount 6 BT toolholders on turret periphery • Measuring systems: Direct measuring systems on X and Z with air-purge protection • Spindle & workholding: Main spindle 17.5 kW / 370 Nm (40% ED), up to 4000 rpm; bar machining through spindle; max. bar diameter 65 mm; chuck with through-hole clamping mechanism • Tailstock: Heavy-duty hydraulic tailstock, programmable with two selectable feed speeds • Axes/guides: Linear guides on all axes, width 45 mm; rigid machine bed; high positioning accuracy • Footprint/chips: Compact footprint; chip discharge from the side • Lighting: Integrated LED work area lighting • Coolant: High-pressure coolant pump 12 bar; manual coolant flushing gun 5 bar Additional equipment • Chip conveyor (included)

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,361 h, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 410 mm, This 3-axis CHARMILLES ROBOFORM CT 400 was manufactured in 1996. It features X-axis travel of 450 mm, Y-axis travel of 320 mm, and Z-axis travel of 410 mm. The tank dimensions are 1195x800x400 mm, supporting a maximum workpiece weight of 800 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM CT 400 machine we have for sale. Contact us for more information. • Maximum workpiece weight: 800 kg • Tank length: 1195 mm • Tank width: 800 mm Kjdpfx Ajx Uzb Eobcslp • Tank height: 400 mm

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) Klsdpsx D E Dyjfx Abcop • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Additional equipment • PCU 50 • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Counter spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools • Preparation bar loader Machine Benefits Technical Machine Benefits • In the event of sale, some tool holders, including driven tools, would also be sold. Extra Information The machine was completely dismantled, cleaned, checked for all functions, and overhauled by Eichten Werkzeugmaschinen GmbH in December 2023 before it was put into operation. It is therefore technically in perfect condition. Kedpfsx D R Hgox Abcelp

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, number of axes: 3, This 3-axis Werth Scope-Check 400 was manufactured in 2013. It features a measuring range of 400 mm in the X and Y axes, and 300 mm in the Z axis. The machine is equipped with a tactile probe system and operates on Windows 7 Professional. If you are looking to get high-quality measurement capabilities, consider the Werth Scope-Check 400 CMM machine we have for sale. Contact us for further details. Ksdpfx Absym Ai Tscelp • Optical measuring accuracy: • MPE E1: (1.5 + L/250) µm • MPE E2: (1.9 + L/250) µm • MPE E3: (2.9 + L/100) µm • MPE PS/2D (OS): 1.1 µm • MPE PS/2D (OT): 1.9 µm • Tactile measurement: • Probe system: TP200 / SP25 Kit 1 • MPE E3: (1.9 + L/250) µm • MPE P: 1.9 µm • MPE THN: 2.5 µm • MPE THP: 2.5 µm • Operating conditions: • Temperature range: 20°C ± 1 K • Temperature gradient: 0.5 K/h • Electrical: • Voltage: 115–230 V AC • Frequency: 50–60 Hz • Maximum current: 10 A • Software: WinWerth • Operating system: Windows 7 Professional 64-bit • Notes/condition: • SM25-2 module for tactile measurement is missing • Small chip in the glass plate (does not affect functionality)

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Kodpfx Ajx D Efqjbcolp • Max stroke rate: 350 1/min • Max material width: 60 mm • Standard center ram force: 20 KN • Standard center ram stroke: 45 mm • Air pressure for pneumatic clutch: 6 BAR • External dimensions of the machine (WxHxD, without protective cabin): 2000×2000×900 mm • External dimensions of the control cabinet (WxHxD): 1000×2200×600 mm • Drive: Asynchronous main spindle motor 10.6 kW / 71.3 Nm @ 760 rpm • Reduction ratio: 1:5.09 • Clutch: Unit brake (mechanical) / clutch (pneumatic) • Power: adjustable from 20 rpm to 350 rpmMachine under power Additional equipment • NC roller feeder (feeding length freely programmable) Dimensions Machine Depth 2450 mm

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: FANUC, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm Klodpoybbiujfx Abcep • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: approx. 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Axes • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 202 mm, travel distance Z-axis: 450 mm, spindle motor power: 12,000 W, total height: 1,730 mm, total width: 1,563 mm, overall weight: 3,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D powerline, product length (max.): 4,000 mm, number of axes: 3, This 3-axis Gildemeister CTX 310 was manufactured in 2003. It features a maximum turning diameter of 246 mm and a turning length of 445 mm. The machine is equipped with a spindle power of 12 kW and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 310 horizontal turning machine we have for sale. Contact us for further details. • Availability: 2 units available • Spindle • Nose: FL 140 h5 • Max torque: 115 Nm (153 Nm at 40% S6) • Bore: 69 mm • Chuck diameter: 170 mm (optional 210 mm) • Bar capacity: Ø 50 mm • Working range • Swing over bed: 500 mm • Max turning diameter: 246 mm • Max turning length: 445 mm • Distance between centers: 600 mm • Turret and tools • Turret type: VDI 30 • Tool stations: 12 Kljdpsympcaofx Abcop • Driven tools speed: 4200–5000 rpm (depends on control: Fanuc/Siemens/Heidenhain) • Driven tools power: 3.3–4.4 kW • Feeds and axis data • Rapid traverse (X/Z): 24/30 m/min • C-axis rapid: 100 rpm • Feed force (X/Z): 450 daN • Resolution (X/Z): 0.001 mm • Bed • Inclination: 45° • Material: Cast iron • Electrical and auxiliary • Supply voltage: 400 V (±10%), 50 Hz • Total installed power: 24 kVA • Hydraulic system pressure: 50 bar • Coolant tank capacity: 175 liters • Control systems (options): GE-FANUC 21i-TB, Siemens 840D, Heidenhain 4290 E Additional equipment • Chip conveyor (both units) • Extraction unit (one unit)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 54,526 h, screw diameter: 35 mm, This Arburg 520 H 1500-400 was manufactured in 2013. A hydraulic injection moulding machine with a closing force of 150t and a screw diameter of 35mm, it operates on 400V 3∼, 50Hz with a total connected load of 89kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. • Operating voltage: 400 V 3~, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 90/69 A Kedsx D Rk Eepfx Abcelp • Total rated current: not specified • Total connected load: 89 kW • Optional: Geiger Handling

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) Kledpfx Abjx D Hgvecep • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)