Used Curves for sale (724)

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm Ijdpjin Ub Tofx Adlotl largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, mileage: 3,79,976 km, power: 350 kW (475.87 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, D6G Automatic climate control, A1C Front axle 7.5 t, A1Z Front axle, curved design, A2E Rear axle, bevel gear 440, hypoid, 13 t, B1B Electronic braking system with ABS and ASR, B1F Heater, electronic compressed air supply unit, B2A Disc brakes on front and rear axles, B4A Condensate monitoring for compressed air system, B4M Compressed air tank, steel, B5J Brake and electrical connections, low, C0G Frame overhang 1050 mm, C1W Wheelbase 3700 mm, C5D Access, behind cab, left, C5P Frame, bolted, C6G Steering, power steering twin, C6I Steering assist pump, regulated, C6Q Stabilizer, front axle, C7F Front underrun protection (ECE), aluminum, C7T Integral rear, C8C Rear axle mudguards, 2500 mm vehicle width, C8H Mudguards, 3-part, with EC splash protection, C8I Splash protection (EC), front, C8Y Underbody panel, aerodynamic, D0A Leather steering wheel, D0S Compressed air connection, in cab, D0U Smoke detector, in cab, D1C Driver's air-suspended seat, comfort, D1N Co-driver's functional seat, D2N Seat back, release, driver's seat, D3A Comfort bed, upper, wide, adjustable, D3B Comfort bed, lower, D3M Mattress, PremiumComfort, lower, D3N Mattress, PremiumComfort, upper, D3Q Seat cover, velour, driver's seat, D3T Seat cover, velour, co-driver's seat, center seat, D4S Sunblind, 1-piece, electric, windshield, D4T Curtain, transverse in front of bed(s), D4Z Sunblind, side, driver and co-driver side, D5Z Carpet, engine tunnel, D6C Electric auxiliary heater, D6I Waste heat recovery, D6M Hot water auxiliary heating, We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Isdpfx Adeik D Sdslstl Furthermore:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage.

Condition: used, mileage: 5,50,000 km, power: 350 kW (475.87 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, D6G Automatic climate control, A1C Front axle 7.5 t, A1Z Front axle, curved design, A2E Rear axle, bevel gear 440, hypoid, 13 t, B1B Electronic braking system with ABS and ASR, B1F Heater, electronic compressed air supply unit, B2A Disc brakes on front and rear axles, B4A Condensate monitoring for compressed air system, B4M Compressed air tank, steel, B5J Brake and electrical connections, low, C0G Frame overhang 1050 mm, C1W Wheelbase 3700 mm, C5D Access, behind cab, left, C5P Frame, bolted, C6G Steering, power steering twin, C6I Steering assist pump, regulated, C6Q Stabilizer, front axle, C7F Front underrun protection (ECE), aluminum, C7T Integral rear, C8C Rear axle mudguards, 2500 mm vehicle width, C8H Mudguards, 3-part, with EC splash protection, C8I Splash protection (EC), front, C8Y Underbody panel, aerodynamic, D0A Leather steering wheel, D0S Compressed air connection, in cab, D0U Smoke detector, in cab, D1C Driver's air-suspended seat, comfort, D1N Co-driver's functional seat, D2N Seat back, release, driver's seat, D3A Comfort bed, upper, wide, adjustable, D3B Comfort bed, lower, D3M Mattress, PremiumComfort, lower, D3N Mattress, PremiumComfort, upper, D3Q Seat cover, velour, driver's seat, D3T Seat cover, velour, co-driver's seat, center seat, D4S Sunblind, 1-piece, electric, windshield, D4T Curtain, transverse in front of bed(s), D4Z Sunblind, side, driver and co-driver side, D5Z Carpet, engine tunnel, D6C Electric auxiliary heater, D6I Waste heat recovery, D6M Hot water auxiliary heating, We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! Isdsik D Spepfx Adljtl -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage.

Condition: good (used), Used stainless steel tank Itjdpefbx Hgofx Adljl Article number: 10463 Last application: Cosmetics Volume: approx. 500 liters Type: Standing on 4 legs with forklift tunnel Material (in contact with media): 1.4301 stainless steel Design: Single-walled Bottom: Conical bottom Top: Curved Operating pressure according to nameplate: ATM Tank dimensions: Outer diameter: 880 mm Height of legs: 110 mm Distance from outlet to bottom: 190 mm Overall height: 1595 mm Overall width: 800 mm Overall length: 880 mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Manhole: 355 mm Forklift tunnel

Condition: good (used), Used stainless steel container / transport container / IBC Last application: Chemicals Item number: 10315 Tank cleaned! Volume: 500 liters Type: Standing in a galvanized stacking frame Material (media-contact): 1.4301 / AISI304 Design: Single-walled Bottom: Curved Top: Curved Operating pressure according to nameplate: +0.2 bar Container dimensions: Overall width: 1200 mm Overall length: 1000 mm Overall height: 1000 mm Materials: Inside: 1.4301 / AISI 304 External parts: Galvanized steel Itodpfjd I S Ulsx Adlsl Features: Nameplate: Yes Discharge diameter: 50 mm Discharge type: DN50 Discharge valve: Yes

Condition: good (used), Used stainless steel transport/storage container Last use: Foodstuffs Article number: 10365 Volume: 800L Type: Standing on four legs with forklift tunnel Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Bottom: Curved Top: Curved Container dimensions: Manhole: 395mm Outer diameter: 960mm Inner diameter: 940mm Isded N Nr Ispfx Adljtl Cylindrical height: 680mm Distance from outlet to bottom: 170mm Overall height: 1750mm Overall width: 960mm Overall length: 960mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Features: Nameplate: yes Outlet: DN50 DIN11851 Outlet valve: Disc valve

Condition: good (used), Used stainless steel transport/storage container Last use: Foodstuffs Article number: 10369 6 units Volume: 1000 L Type: Standing on four legs with forklift tunnel Material (in contact with the medium): 1.4301 / AISI304 Design: Single-walled Bottom: Curved Top: Curved Operating pressure according to nameplate: +1.0 / -0.15 bar Container dimensions: Manhole: 390 mm Outer diameter: 1000 mm Inner diameter: 980 mm Cylindrical height: 1010 mm Distance from outlet to bottom: 200 mm Total height: 1830 mm Total width: 1000 mm Total length: 1000 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Nameplate: yes Outlet: DN50 DIN11851 Isdpfxsd Rnkyj Adljtl Outlet valve: Disc valve

Condition: good (used), Used stainless steel pressure vessel Article number: 10398 Volume: 400 liters Type: Standing on rollers with forklift tunnel Material (in contact with the medium): 1.4404 / AISI316L Manhole: 410mm Design: Single-walled Bottom: Conical bottom Top: Curved Operating pressure according to nameplate: +2.2 bar Vessel dimensions: Outer diameter: 750mm Distance from outlet to bottom: 120mm Overall height: 1840mm Overall width: 900mm Overall length: 750mm Features: Nameplate: Yes Itsdpfed R Hfdex Adlel Outlet type: Camlock

Condition: new, RT200-02-320-RH-20-4, RT200, Taktomat drum curve rotary table with motor Iodpferazk Rox Adletl Model: RT200-02-320-RH-20-4 Type: RT200 Condition: New

Year of construction: 2020, condition: new, Brand new OEM unit with 4 servos. Itodpfxsn Ry T So Adlsl For printing XXL size items (such as engine covers, even curved products) Year 2020 0 Work hour With warranty Electrical: 400V/ 10A Please check out our other listings as well.

Year of construction: 2017, condition: used, 90 degree curved conveyor belt Itjdpfx Adet Sbgtelol Measurements in the photo album

Condition: good (used), Year of construction: 1981, Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine Isdpfx Asb A Hfqsdlstl For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Condition: used, Year of construction: 2003, Curved roller conveyor belt Overbeck Kempen, 45° Belt width 840mm, with drive Year of manufacture: 2003 Price: €3,900 Contact person: Mr. Rainer Eckerle Isdjbh Sbnepfx Adlstl

Condition: new, functionality: fully functional, overall weight: 39,000 kg, tire size: 385/65R22.5, Equipment: ABS, MENCI SEMI-TRAILER WITH “SQUARE” TIPPER BODY - SA850R Volume: 45.4 m³ Dimensions: 9,200 x H 2,000 mm Floor: 6 mm Rear Floor: 8 mm Unladen Weight: 6,650 kg GVW: 39,000 kg Description, Version & Accessories - 3rd steering axle SAF with disc brakes Ø430 (ET120) 2/2 - 1st axle with automatic lifting - CRAMARO hermetic electric tarpaulin type C (2023) with cover - Stainless steel toolbox 90x50x50 cm Iodpfxevzh T Ae Adlstl - Toolbox 90x50x25 cm - Complete ADR kit + A & R plates - Pressure gauge - Electric motovibrator operated by remote for cover system - PROMETEON 385/65 R 22.5 tyres - Steel rim 385/65 R 22.5 OFFSET 0/120 - Remote control for CRAMARO tarpaulin - Additional rear LED work light - Painted hubs - Full LED rear lighting - TPMS (Tire Pressure Monitoring System) - Hub color: RED RAL 3020 - Tarpaulin cover color: BLUE RAL 5002 - Tarpaulin height at bows H=300 mm - Cover with ADR tarpaulin - 3 access steps - Anti-wear triangles Chassis in steel, body in alloy Standard Configuration: - Steel chassis - Pneumatic suspension with manual height adjustment valve - Jost landing legs with oscillating curved base - Brake system with EBS 2S/2C and load-sensing valve - Electrical system according to A.D.R. regulations - Aluminum air tanks, pneumatic quick suspension release device - Tipping system with front 5-stage telescopic cylinder - Pneumatic parking brake - Descent safety valve, double-acting piston hydraulic system with gate valve - Front ladder and removable ladder over the mudguards - 2 towing eye holes on rear underrun protection bar hinge FINANCING OR TAILORED LEASING OPTIONS AVAILABLE ON SITE. From 24 up to 96 installments, also with zero down payment. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY–FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES, INCLUDING: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-Trailer - Refrigerated Semi-Trailer – Lamberet - Schmitz Isuzu - Fixed Box - Crane - Tipper - 4 axle - Rear 4 Axle - Tway - T-Way-540- 460 hp - Xway - X-Way - Three-Way - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tail-lift Body - Refrigerated Unit - Insulated With Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies regarding technical specifications, options or features that may in some cases differ from those described. Please verify the specific features of the vehicle.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 MASS VAST GOLD - RDS+VAST XXT Itsdezk Id Aepfx Adlsl Year of manufacture: 2004 Retrofit 2024, last calibration 01/2025 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system RDS sensor system with VAST XXT Probe changer magazine MSR 10-position VAST Gold Probe changer magazine 3-position VAST XXT Probe changer plate 8x VAST Gold Probe changer plate 3x VAST XXT Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation WIN11 with monitor Calypso Basic 2024 software Curve and QS-Stat options Calypso upgrade and other options possible Further accessories and options possible Available for short-term delivery.

Year of construction: 2026, operating hours: 1 h, condition: new, machine/vehicle number: H10TM, Universal testing machine H10TM Ijdpozuma Rofx Adlstl Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 84 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Load cells: 5N-10N-20N-50N-100N-200N-500N-1kN-2kN-3kN-5kN-10kN - Grips: Compression platens, bending fixtures, shear fixtures, wedge grips, scissor grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: used, mileage: 3,40,560 km, power: 260 kW (353.50 HP), first registration: 12/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, color: beige, gearing type: automatic, emission class: euro6, total length: 9,790 mm, total width: 2,600 mm, total height: 2,630 mm, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: Schmitz deep-freeze box * Refrigeration unit: Thermo King UT 800 * Temperature recorder * Box side wall: 50 mm * Double-wing doors: 80 mm Feroplast * Storage compartment, high engine tunnel * Axle load measurement device * Front axle load: 8.0 t * Trailer stabilization program: TSA * Audio system: Digital radio DAB / DAB+ * Equipment package: Comfort * Cab: steel-sprung, Comfort * Sun visor, side window, driver's door * Driver's seat: Comfort, air-suspended * Airbag, driver's side * Equipment package: Visibility * Bi-Xenon headlights * Rear lights: LED * Headlight cleaning system (HCS) * Exterior mirror, right, with maneuvering position * Battery: 220 Ah * Brake connection: Standard and DuoMatic * CB radio * Cockpit: Interactive multimedia * Navigation system * Remote query function: Remote Online * High-pressure air unit * Air horn * Electrical pre-wiring in the cab: 24V / 100 A * Driver assistance system: Turning assistant * Transmission: 12-speed - Type: G 211-12 * Manual lift roof (steel) * Automatic climate control * Fuel tank: 290 liters, aluminum, right * Air deflector, roof (lockable) * Engine brake: enhanced * Wheelbase: 5500 mm * Frame overhang: 2700 mm * Reversing warning: acoustic and warning flashing light (external warning signal) * Tail lift switch * Seats in the cab: Driver's seat with massage function * Exterior sun visor * Additional stabilizer: rear axle / trailing axle * Additional 12V / 15 A socket in the co-driver's footwell * 24V / 25 A socket in the co-driver's footwell * Preparation for 4 surround cameras (display in the onboard monitor) * Preparation for additional headlights * Preparation for additional turn signals * Auxiliary heater (water) * Additional equipment: * Reversing camera * Emission standard: EURO 6D * Axle configuration: 4x2 * Actros 5 * Actros cab: S / M * Approach / front mirrors, heated * Trailer brake: 2-line, connections on the left * Trailer socket: 24V / 15-pin * Exhaust pipe directed to the center of the vehicle * Batteries arranged side by side * Differential lock: rear axle * High-pressure air unit with condensate monitoring * Automatic switching for dipped headlights (light sensor) * Cab: Hydraulic tilting mechanism * Cab: M ClassicSpace, 2.30 m, tunnel 320 mm, cab floor with engine tunnel 320 mm, cab: width 2.30 m, cab variant: M * Storage flap, external, left * Storage compartments with lids behind the driver's and co-driver's seats * Vehicle outline lights: LED Iedpfxjzuhlbj Adlotl * Suspension: Air / Air (full air) * Power windows * Windshield: tinted * Speed limiter * (AdBlue): 60 liters * Comfort locking system * Air intake from the front * Heated air dryer * Engine: 7.7 liters - 260 kW R6 Diesel (OM 936), engine variant OM 936 * Waste heat recovery * Disc brakes: front and rear axles * Key with remote control (2) * Side marker lights: LED, flashing * Seats in the cab: Co-driver's seat * Splash guard, front * Stabilizer: front axle * 12V socket in the co-driver's footwell * Tachograph / EC tachograph * Truck Data Center 7 (fleet management system) * Underrun protection, front * Preparation for toll collection * Preparation for Truck Data Center (fleet management system) * Front axle: curved * Permissible total weight: 18.00 t * Errors, changes and prior sale are subject to change.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 3.3 kW (4.49 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 480 mm, Equipment: CE marking, motor brake, Felder FB 510 vertical band saw, purchased on May 26, 2021, for cutting curves, making lengthwise cuts, and creating shaped cuts in wood and wood-based materials. A robust workshop machine for cutting to size, model making, furniture construction, and training purposes. Key technical data: - Machine type: Vertical band saw - Model: Felder FB 510 - Cutting height: approx. 410 mm - Cutting width / throat: approx. 480 mm - Roller diameter: approx. 500 mm - Table size: approx. 500 x 640 mm - Table tilt: approx. -10° to +45° - Band saw blade length: approx. 4318 mm Isdpfxozun Szo Adlotl - Band saw blade width: approx. 6–25 mm - Cutting speed: approx. 1100 m/min or 1450 m/min, depending on the model - Motor power: approx. 3.3 kW - Dust extraction: 2 dust extraction ports - Weight: approx. 250 kg - Versatile machine for curve cuts, contour cuts, ripping, and general cutting - Suitable for solid wood and wood-based materials - Of interest to woodworking shops, model makers, training centers, and makerspaces No guarantee.

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Calibration machine accuracy (option) new LED ring light (option) automatic image evaluation (option) 2 interfaces parallel + serial, as well as Isdpfx Adjzg Tyuolotl keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Itsdezdz S Tjpfx Adlol Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: used, Year of construction: 1993, machine/vehicle number: HZ668, DEMAG KBK 2 – Overhead Crane System, Bridge Crane, Hall Crane The images show an example overhead crane system with the components listed below. These components are also available individually! Please request a quote for your overhead crane system, tailored to your specific dimensions. Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg. KBK 2-R left-hand switch (with collector line) KBK 2-R swivel disc, 2000 mm (with collector line and electric swivel function) 71515146 Isdpoy Ufddefx Adlstl KBK 2-R curved rails 15, 30, 45, 60, 90 degrees (with collector line) KBK 2-R rails (with collector line) The system can be delivered completely according to your requirements. Rails, rail connectors, trolleys, end plates, cable carriers, supports/hangers, and accessories are available. Chain hoists available upon request. Very good, used condition. Shipping via freight forwarder is possible. Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Itsdpfx Adoy Ufgrelsl Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Itsdpfozn I N Hex Adljl Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: used, Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Ijdpezn Na Tsfx Adletl Modularly expandable Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement.

Condition: excellent (used), Double-Jacketed Mixing Vessel / Pot – 650 L – Stainless Steel Industrial mixing vessel / pot with a capacity of 650 liters, made of stainless steel, equipped with a double jacket for heat treatment and a mixing system, designed for the preparation, mixing, heating, and homogenization of food products in industrial batch processes. The equipment combines a 650-liter vertical vessel with a motorized agitator and a double jacket, allowing mixing and heat treatment operations to be carried out in a single container. Its design is particularly suitable for products that need to be kept in motion during heating to achieve a uniform distribution of ingredients and temperature. MAIN FEATURES -Type: Industrial mixing vessel / pot with agitator -Capacity: 650 liters -Vertical configuration -Double jacket for heat treatment -Integrated mixing system -Agitator with motorized drive -Mixing and homogenization of the product -Stainless steel construction -Large-capacity process vessel -Curved bottom -Sanitary product connections -Bottom discharge -Robust structure on legs -Designed for batch processing -Hygienic construction for the food industry -Integrable into existing production lines PROCESS The vessel is designed to receive the ingredients and continuously mix them using the internal agitator. The double jacket allows for heat treatment of the product, which can be used for heating, temperature maintenance, or cooking operations, depending on the product and the available thermal services. Agitation during the process promotes homogenization of the ingredients and a more uniform distribution of the temperature, making it particularly useful for liquid, semi-liquid, and viscous products. It can be used for: Mixing and homogenization Heating Itodpfx Aszxcd Hedlel Cooking Temperature maintenance Dissolving ingredients Preparation of formulations Production of sauces, creams, and purees Preparation of fillings and formulated products APPLICATIONS Especially suitable for canning industries, sauce manufacturers, ready-meal producers, vegetable product manufacturers, cream and puree manufacturers, filling manufacturers, and other food industries that require a versatile mixing and heat treatment equipment. The combination of a 650-liter capacity, double jacket, motorized agitator, and stainless steel construction provides a robust solution for industrial processes involving preparation, cooking, and mixing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.