Used Cut To Length Line for sale (51,767)

Condition: new, Year of construction: 2025, Max. cutting section mm. 280x95 / 240x125 / 340x15. Structure entirely in thick and reinforced painted steel. Solid ground anchoring system with flanged steel feet for the hole. Ergonomic two-hand safety cutting controls. Independent pneumatic adjustments to adapt to different types of work. Compressed air progressive starter in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. CUTTING UNIT: Cutting unit with horizontal plane. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. Shock absorbers at the end of the stroke. Swing with bearings. Motor anchoring with easy adjustment for perfect 90 degree cuts. Easy maintenance with easy access. Solid ground anchoring system with adjustable steel feet with perforated flange. Blade motor power HP=7.5 (5.5 kW). HM circular blade, diameter mm. 500. Cutting edges Z=108. Hole diameter mm. 35 Adjustable cutting time from 0.5 to 2 sec. Adjustable cutting speed via pneumatic regulator on control panel. Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on control panel. Intelligent presser: Automatic adaptation to wood thickness, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. Cgodpfswk Himox Abpsn The entire system is equipped with individual and independent pneumatic adjustments, external on control panel, to adapt to the different types of work to be performed.

Condition: new, Year of construction: 2025, Max. cutting section mm. 610x30 / 520x100 / 420x150 Structure completely in painted steel of large thickness and reinforced. Csdpowk Iphjfx Abpegn Solid anchoring system to the ground with flanged steel feet for the hole. Two-hand safety cutting controls in ergonomic position. Independent pneumatic adjustments to adapt to the different types of processing. Progressive starter compressed air in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. Cutting time adjustable from 0.5 to 2 sec. Cutting speed adjustable via pneumatic regulator on the control panel. CUTTING UNIT: Cutting unit with extremely robust horizontal plane, equipped with galvanized idle rollers with capacity 600 kg, diameter 89 mm, width 500 mm. Tilting cutting movement with power transmission via a group of belts. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. End-of-stroke shock absorbers. Swing with bearings. Motor anchoring with easy adjustment for perfect 90-degree cuts. Easy maintenance with easy access. Blade motor power HP = 14.8 (11 kW). HM circular blade, diameter mm. 600. Cutting edges Z = 108. Hole diameter mm. 35 Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on the control panel. Intelligent presser: Automatic adaptation to the thickness of the wood, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on the control panel, to adapt to the different types of work to be performed.

Condition: ready for operation (used), Technical characteristics Blade Ø 800 mm Motor 10 HP Motorized feed of the cutting plane 400 mm Cgedpfx Absrmgm Depon Rotation vertical axis 180°. Infeed table length 6000 mm Motorized stop 7000 mm long on the right Roller table with wood feed by lower rollers and cylinders for alignment Vertical pneumatic pressers Two-hand control Power and Motors Voltage: 380 V Pluging: Three-phased Power: 8 Kw Motor: 10,5 CV Overall dimensions Weight: 1200 Kg

Condition: ready for operation (used), Technical characteristics Max. blade Ø 450 mm, bore 30 mm Motor power : 4 kW Rotation speed : 2800 RPM Cutting capacity (height x width of wood) : 25 x 330 mm, 50 x 300 mm, 100 x 250 mm Infeed table : Outfeed table : Tigerstop stop supplied 2 suction nozzles Ø 100 mm Ideal for : cutting wood tiles, packaging, pallets, rafters, lumber Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 2100 mm Width: 1010 mm Cgedpfxeradt Do Abpon Height: 1210 mm Weight: 310 Kg

Condition: used, DIMENSIONS: HEIGHT 100 mm WIDTH 270 mm ELECTRONIC PUSHER LENGTH 6100 mm Csdpfx Aew E Eudobpsgn SAW BLADE MOTOR 4 kW

Year of construction: 2006, operating hours: 8,830 h, condition: good (used), functionality: fully functional, machine/vehicle number: R1153413, Alpine mill including complete plant for sale Cutting mill: Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor Year of manufacture: 2006 Included: Material feed belt (designed for automotive bumpers), mill, conveyor line for packaging into octabins or big bags, dedusting system. Condition: Very well maintained, regularly and promptly serviced Inspection: In operation until recently, currently still powered and available for on-site inspection at any time Cjdpfjxd Aiasx Abpogn Ready for operation: Immediately available and fully functional The machine is in very good condition and is ready for immediate use.

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Cgodpsw Az Rpefx Abpen

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand Csdpfxstwz Tlo Abpegn

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs Cgjdpfsv Awguex Abpsn - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: new, Year of construction: 2025, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: Cjdpjq N U Dusfx Abpjgn - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, total width: 2,350 mm, throat depth: 500 mm, empty load weight: 1,800 kg, Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm Cgsdpfx Abjxbui Tepon herhaalde materiaaltoevoerlengte: 0-9999 mm maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4200 x 34 x 1.1 mm

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. Codpfx Aoxm Rmxebpsgn The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. The machine list is available in the documents along with information about the company. The machines have seen little use since 2019 and remain in good condition.

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Codpscudizofx Abpogn Cost of delivery Client cover startup type negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Codoxbta Djpfx Abpjgn Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Condition: used, Year of construction: 1988, Cutting width: 5,300 mm Trimming height: 1,950 mm Cutting depth: 80 mm Saw unit swiveling: 90° Motor power: 4.6 kW Saw blade speed: approx. 4,420 rpm Saw blade diameter: 300 mm Weight: approx. 1,200 kg Storage location: Nattheim Cgedpfox Rb Scjx Abpsn

Condition: used, mileage: 5,16,361 km, power: 265 kW (360.30 HP), first registration: 05/2015, fuel type: diesel, number of seats: 56, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,450 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional Options and Accessories = - DVD player - Front refrigerator - Retarder - Wheelchair lift Cedpeyhbmmsfx Abpjgn - Webasto heater = Further Information = Damages: none = Company Information = We are an international company based in Belgium, located approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for purchasing and selling used buses, offering a large parking area that serves as our exhibition space. We always have a wide selection of buses of all brands, capacities, models, and price ranges in stock. We can help you find the right coach, school, or city bus tailored to your requirements and budget. All information is provided without guarantee. Subject to errors, prior sale, and typing mistakes. Viewing hours for used buses: Mon–Fri: 08:30–12:00, 12:30–17:00. We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more. (Mówimy po polsku, Agata)

Condition: used, maximum load weight: 33,960 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, 8 pairs of ALU stanchions / steel stools Exte D7 8 pairs of ALU stanchions and steel stool structure EXTE D7 Cgodpfx Aon Ryfaobpsn

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle Csdpfx Aohhzl Hjbpegn * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: used, mileage: 10,85,960 km, power: 323 kW (439.16 HP), first registration: 01/2013, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, Fahrzeugausstattung* 1 Bett * ABS * ASR * Automatik * Seitenspoiler * Zentralverriegelung * CD * elektrische Fensterheber * Hydraulik * Wegfahrsperre * Klimaanlage * hohe Kabine * Scheibenbremsen * Kühlschrank * Zwischenachsspoiler * Nebelscheinwerfer * unabhängige Heizung * Bordrechner * Zusatzscheinwerfer * Radio * Retarder * Serviceheft * Sonnenblende * Dachfenster * Dachspoiler * Tempomat Cgjdevh Sdlopfx Abpsn * getönte Scheiben * Funksprechgerät * Achsentlüftung * beheizbare Spiegel

Condition: used, mileage: 12,61,071 km, power: 324 kW (440.52 HP), first registration: 04/2012, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, parking heater, Fahrzeugausstattung* 2 Betten * 2x Tank * ABS * ASR * Automatik * Seitenspoiler * Zentralverriegelung * CD * elektrische Fensterheber * Wegfahrsperre * Klimaanlage * hohe Kabine * Scheibenbremsen * Kühlschrank * Zwischenachsspoiler * Nebelscheinwerfer * unabhängige Heizung * Bordrechner * Zusatzscheinwerfer Codjx Ubccepfx Abpsgn * Radio * Retarder * Sonnenblende * Dachfenster * Dachspoiler * Tempomat * getönte Scheiben * Achsentlüftung * beheizbare Spiegel

Condition: used, mileage: 80,077 km, power: 103 kW (140.04 HP), fuel type: gasoline, gearing type: automatic, axle configuration: 2 axles, first registration: 07/2019, emission class: euro6, color: white, suspension: steel, number of seats: 5, total width: 1,800 mm, total height: 1,608 mm, fuel: regular/benzine 91, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, Active Guard (brake assist), driver airbag, collision warning system with braking function, brake assist, Business package, high beam assist, automatic tailgate operation, LED headlights, storage package, passenger airbag, passenger airbag deactivation, driver/passenger airbags, ambient lighting, anti-lock braking system (ABS), attention assist, body-coloured exterior mirrors, electrically adjustable exterior mirrors, outside temperature display, turn signal indicators integrated into exterior mirrors, check control system, ConnectedDrive Services, black roof rails, wheel theft protection (wheel locks), Driving Assistant, dynamic brake lights, Dynamic Stability Control (DSC), Dynamic Traction Control (DTC), drive experience switch, colour monitor (6.5 inch), Bluetooth hands-free system with USB/audio interface, luggage compartment partition (net), luggage compartment cover/roller blind, cruise control with braking function, 7-speed dual-clutch transmission with Steptronic, interior mirror with automatic dimming, instrument panel - lower section piano black, Intelligent Emergency Call incl. TeleServices, interior trims - high-gloss black, ISOFIX mounts for child seat on front passenger seat, ISOFIX mounts for child seat on rear seat, body: 5-door, 2-zone automatic climate control with automatic recirculation control, rear head airbag system, front head airbag system, enlarged fuel tank, alloy wheels 7.5x17 (star spoke 379 - bicolour), lumbar support for front left and right seats - electrically adjustable, steering wheel (sport/leather), steering column (steering wheel) mechanically adjustable, light and rain sensor, light package, metallic paint finish, rear centre armrest, front centre armrest, model update, Mult., We Buy Your Car! Secure purchase of your vehicle. Let us conveniently evaluate your vehicle. Our specialized team guarantees you the highest possible purchase price. Of course, you can continue to drive your old vehicle until you pick up your new one from us. ... more on our website. Cedpfx Asyagtcsbpegn

Condition: good (used), Year of construction: 2016, functionality: fully functional, Topcoat line for leather, working width 1800 mm, with infrared dryer, air scrubber and chiller. Cgsdpfx Ajx S Er Nebpon

Condition: used, Breton Sample Line is the line for production of display samples in a wide range of materials and sizes Cedpfx Absxdi Rwspsgn The samples that can be produced on the Samples Line are suitable for marketing and exhibition uses. The line can process several materials: quartz, granite, marble, and porcelain stoneware.

Year of construction: 2014, condition: ready for operation (used), This RALC ITALIA CUTTING LINE LYBRA was manufactured in 2014. It features an automatic circular blade for cutting metal tubes, including solid, tubular, and profiled types. Key components include a bar loader up to 6500 mm, multiple cutting capabilities, and a Siemens PLC for enhanced control. Ideal for high precision metal cutting. Contact us for more information about this machine. Application Types Cedpfxjx D Ivxs Abpsgn Sawing

Condition: used, mileage: 1,62,800 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2023, next inspection (TÜV): 01/2026, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Equipment: * Highline package * R Line exterior package * Digital cockpit * Front and rear parking sensors * Ambient lighting * 3-zone climate control (Climatronic) * LED headlights with automatic range adjustment * DSG transmission * Front camera / multifunction camera * Audio navigation system * 17" alloy wheels * Chrome package 2 * Electric windows * Heated seats front and rear * Multifunction leather steering wheel with paddle shifters * Driver fatigue detection system * Multi-collision brake * Trailer stabilization program * Adaptive cruise control * Lane keeping assist * Lane change assist * Surround monitoring system * Front assist system * DAB+ radio * Fabric upholstery / Microfibre ArtVelours * Rain sensor * Electrically adjustable, heated exterior mirrors * Luggage management package * Glove compartment with cooling function * Keyless start * Multimedia interface * Mirror package * 1 owner * Complete service history at VW, last service at 138,247 km on 02.01.2025 * The vehicle has various cosmetic defects (see photos; no guarantee of completeness) which have been accounted for in the offer price. Vehicle number: 96 Cedpjwx Twmofx Abpsgn Whatsapp No.: You can find more vehicle offers at: ONLINE CONSULTATION / ONLINE INSPECTION / ONLINE PURCHASE AGREEMENT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY AVAILABLE FOR AN ADDITIONAL CHARGE Delivery service upon request Foreign customers have the option to make a down payment and collect the vehicle at a later date. NET export possible (for vehicles with VAT claimable). We are happy to take care of your vehicle registration (Düsseldorf), as well as arranging customs/export or transit license plates (5-day). Complete export processing available (export declaration) Vehicles with TÜV used car appraisal available. On request, we are pleased to offer you our GPG used car warranty with individual solutions tailored to you and your vehicle. Part exchange possible. For further questions, we are happy to assist you by telephone. Opening hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00 Subject to change, errors, and prior sale. Offers are non-binding. All details without guarantee. Vehicle descriptions do not constitute warranted characteristics.