Used Cut Up for sale (33,949)

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine Hfedpfx Aasv Iccfe Sjf • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: used, Year of construction: 2016, Automatic Cutting Table System for Textile and Leather Manufacturer: Atom Model: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Cutting window: 1,540 x 600 mm Maximum cutting height: 20 mm Maximum traverse speed: 80 m/min Maximum acceleration: 1G Vacuum power: 1 – 8 kW Connected load: 5.5 kW 380 Volt, 3 phase, 50 Hz Compressed air requirement: 6 bar, 200 l/min (when using pneumatic tool inserts) 9 bar, 400 l/min Equipped with 2 independent multi-tool heads, each comprising: Tool module for all tooling inserts Pen module for marking 2 punching tubes with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm One needle Continuous conveyor belt (transports material into the working zones) Vacuum table: divided into 300 x 300 mm squares Hfodpfx Aaeyf Egxo Ssf High-performance vacuum turbine with frequency control, up to 1 – 8 kW High-brightness projector Servo drive for X, Y and Z axes Safety system with light curtain monitoring and emergency stop switch Machine dimensions: 2,210 x 2,506 x 1,841 mm Weight: 1,630 kg

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Hedpfsw Nac Asx Aa Soff Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Hfsdpfx Ajwftb Soa Sef

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMPACT, The COMPACT model plasma cutting machine is a machine model that protects your budget through lower investment and reduced costs, prioritizing reliability, user-friendliness, and compactness as its three main principles. The Compact is a valid solution for the needs of a wide market segment, offering an excellent cost/benefit ratio for anyone dedicated to sheet metal processing. COMPACT is characterized by a monoblock design with a compact layout, making it easy to transport and suitable for medium and small workshops. This system is ideal for high-capacity plasma power sources. The system comes equipped with an extraction filter and plasma power source, and it can be configured with various CNC and software options depending on customer requirements. The Compact can feature a working range between 1,500mm x 3,000mm and 2,000mm x 6,000mm. Hfedpfxsyzm S Aj Aa Sjf

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Hodpfx Aoyzhl Dsa Seff

Condition: used, Year of construction: 2022, Plasma Cutting System Manufacturer: Swift Cut Model: Pro 3000 Year of manufacture: 2022 Hfodpfxsyazzbj Aa Sjf X/Y Travel: 3,000 x 1,500 mm Power source: Hypertherm Powermax65 SYNC Max. sheet thickness (mild steel): 16 mm Max. sheet thickness (stainless steel): 12 mm Max. sheet thickness (aluminium): 12 mm Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm ä16426

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. Hfedoyy Rn Sjpfx Aa Sjf * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER PLUS (Müşteriye Özel Ölçüler), control type: CNC control, laser type: fiber laser, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * MASTER PLUS is a high-capacity, technologically advanced fiber laser cutting machine primarily used for cutting large metal sheets. It is capable of processing long, wide, and various materials in a single operation. For materials of variable sizes, it allows for flexible operation by creating continuous, uninterrupted, and independent cutting zones at different points of the machine. Enables higher production speeds and increased efficiency when processing large-volume materials, leading to significant savings in time and labor. * Single table, fixed cutting bed. * Customizable, available with a wide range of cutting areas. * Equipped with Raycus, MaxPhotonics, and IPG resonators. * Features Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. Hfodpfx Asyy Nrvja Sof * 21.5'' touch screen for easy operation. * CE-compliant. * Configurable with fiber laser sources from 2kW up to 30kW. * Bevel cutting option available. * User-friendly design, easy access to the cutting area. * Thermally processed, robust monoblock welded steel frame for enhanced structural integrity. * Aluminum bridge design provides higher resistance and dynamic performance. * Energy saving through low power consumption. * Remote service capability. * Automatic lubrication system. * Since both design and manufacturing are done in-house, custom production is available according to customer requirements.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER 1500x3000mm / 1500x4000mm / 2000x4000mm / 2000x6000mm / 2500x6000mm, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, type of cooling: water, Equipment: CE marking, documentation/manual, * The MASTER series fiber laser cutting machines deliver high cutting performance, thanks to their robust frame construction and compatibility with power sources up to 30 kW. * Equipped with an automatic, rear-exchange dual shuttle table. * The standard configuration of the MASTER includes a rear table exchange system and the option to integrate automated loading and unloading systems. * Customizable cutting areas are available. * Working ranges: 1,500x3,000 mm / 1,500x4,000 mm / 2,000x4,000 mm / 2,000x6,000 mm / 2,500x6,000 mm. * Available with Raycus, MaxPhotonics, and IPG resonators. * Compatible with Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC control units. * Enhanced usability with a 21.5'' touchscreen interface. * Compliant with CE standards. * Can be equipped with fiber laser sources ranging from 2 kW to 30 kW. * User-friendly design ensures easy access to the cutting area. * Rigid, monoblock, welded steel frame with heat treatment ensures high durability and mechanical stability. * Aluminum bridge design provides added rigidity and excellent dynamic performance. * Designed for energy efficiency with low power consumption. Hfodsyy I N Hopfx Aa Sof * Remote service capability. * Automatic lubrication system included. * As design and manufacturing are performed in-house, customization according to customer-specific requirements is possible.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: EDGE PLUS 1500 x 3000mm / 1500 x 4000mm, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * Raycus, MaxPhotonics, and IPG resonators. * Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touchscreen for high ease of use. * Dual table cutting system with side loading and motorized table exchange. * Occupies 40% less floor space compared to a standard fiber laser cutting machine. * Easy and cost-effective transportation. * CE compliant. * Compact design with a transverse, removable cutting table. * Can be equipped with fiber laser sources ranging from 2kW to 12kW. * Working range: 1,500mm x 3,000mm and 1,500mm x 4,000mm. * User-friendly and provides easy access to the cutting area. * Rigid, monoblock, welded steel body and robust machine structure, thermally stress-relieved. * Aluminum gantry design for increased rigidity and high dynamic performance. * Energy-saving with low power consumption. * Remote service capability. * Automatic lubrication system. * Customized production available according to specific client requirements, as both design and manufacturing are carried out in-house. Hedpfxjyy Iyrj Aa Sjff

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: EDGE 1500 X 3000 / 1500 X 4000, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, * Raycus, MaxPhotonics and IPG resonators. * Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC. * High user convenience with a 21.5'' touchscreen display. * Occupies 40% less floor space compared to a conventional fiber laser cutting machine. * Easy and cost-effective transportation. * CE conformity. * Features a compact design and a transverse removable cutting table. * Can be equipped with fiber laser sources ranging from 2kW to 6kW. * Working range: 1,500mm x 3,000mm and 1,500mm x 4,000mm. Hfsdsyyxpqjpfx Aa Sef * User-friendly, with easy access to the cutting area. * Thermally treated, robust, monoblock welded steel frame for enhanced rigidity. * Aluminum bridge design provides increased strength and high dynamic performance. * Energy saving through low power consumption. * Remote service capability. * Automatic lubrication system. * Production according to customers’ special requirements, as both design and manufacturing are carried out in-house.

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 Hfedsdcd Dlspfx Aa Sof height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: new, Year of construction: 2025, Diameter of saw wheels mm 800 Max. cutting height mm 400 Stationary working table mm 1290 x 800 Max. blade width mm 54 x 0,9 Max. and min. blade length mm 5530 / 5380 Motor power Kw 15 (HP 20) Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100 Compressed air consumption (wheels braking and feeder opening) bar 6 Net weight Kg 880 Feeder Height of feeding carpet mm 300 Length of carpet fence mm 750 Hodpfxoglfv Ds Aa Ssff Idle rollers dia. mm 160 Max. rollers-blade clearance mm 200 Max. fence-blade clearance mm 200 Variable feed speed rate mt/min 0-30

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Hfjdpfxjyrz Ras Aa Sof Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Hsdpjfgyh Tsfx Aa Soff Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Hfsdjttlfkopfx Aa Ssf Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Hjdpsq Ulh Hsfx Aa Soff Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: used, Heavy-duty semi-automatic vertical panel saw for wood Her Supercut 1216 Cutting area: 5300 x 2200 mm Max. cutting depth: 80 mm Swivelling control panel Central display for horizontal and vertical cuts Hedpeyffalefx Aa Sjff Pneumatic lifting and lowering of transport rollers Pneumatic indexing for vertical cuts Pneumatic locking for horizontal cuts Pneumatic plunge of the saw unit Extraction at the cutting point Saw motor: 5.5 kW CE compliant Machine is FULLY FUNCTIONAL and in VERY GOOD CONDITION Available ex-stock Lieboch

Condition: used, New: No Part suitable for: cars Hfjdex S Egtopfx Aa Ssf Contact Lorenz Schoutteet for further information.

Condition: new, Year of construction: 2025, functionality: fully functional, exhibition machine minimum slat thickness 2mm magnetic fence position reader adjustable pulling roller spacing material presence detector Hedpfev Dh R Tex Aa Sjff tape cooling/lubrication system wheel diameter 800mm engine power 15kW smooth feed speed adjustment pneumatic pulling roller pressure control panel with colour touch screen screw tape centring pneumohydraulic tape tensioning year of production 2025 - brand new machine total weight 1300kg 380V power supply Machine available in March

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Hjden I Rgpspfx Aa Soff Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: good (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Good Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in very good condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: 3000 x 1500mm Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer Hfodpfx Aaswb D S He Sef 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, rotational speed (max.): 10,000 rpm, Control system: Heidenhain iTNC 530 Technical specifications: Travel distances: X-axis: 1,100 mm Y-axis: 610 mm Z-axis: 610 mm Rapid traverse (X/Y/Z): 32 m/min Feed rate (X/Y/Z): 12 m/min Distance table surface – spindle nose: 120 – 730 mm Maximum speed: 10,000 rpm Torque: 332 Nm Drive power: 13 kW Tool holder: SK 40 Tool positions: 30 Table dimensions: 1,250 x 610 mm Maximum table load: 900 kg Connected load: 35 kW Machine weight: 7,500 kg Hodpfx Aaox Hfnms Ssff Chip conveyor Internal coolant supply (ICS): 22 bar Coolant tank capacity: 250 liters Air through spindle center

Condition: used, Year of construction: 2011, x-travel 1100 mm y-travel 610 mm Hjdpfx Aaoyk Ifhe Soff z-travel 610 mm control Heidenhain 530 weight of the machine ca. 7800 kg