Used Tooling for sale (37,051)

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Multivac 19.200.1240.95 6x11cmx18cm tray size. Price: 2000 eur Iaedpfx Ajwth Uism Dst the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Type: S3-50 Year: 2012 Dimensions: 460 × 600 × 1260 mm Ijdjx Dbltopfx Am Deat Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: ready for operation (used), REMS press tool, cordless press ACC Li-Ion Plus, Used machine Manufacturer: Rems Type: ACC Li-Ion Plus Overall dimensions: Width: 520 mm Depth: 290 mm Height: 120 mm Key features: Electro-hydraulic drive Pressing force: 32 kN Suitable for pipe press fittings Ø 10–108 mm (up to 110 mm in some cases) Universal motor: 1850 W Battery: Li-Ion 14.4 V / 3.0 Ah (Li-Ion Plus technology) Isdpfxoxl E Nfe Am Djat Multifunctional electronics: soft start, overload protection, automatic retraction (ACC) 360° rotatable jaw holder Built-in LED work light Ergonomic, lightweight design: approx. 4.3 kg Condition: Used, in good working order. Accessories: battery, charger

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Iedpfex Hgmwsx Am Djat Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Iodpox Emfkofx Am Deat Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Iodpfx Aox Emd Tem Dsat Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Isdpfx Aewbvmiem Djat Weight: 110 kg Very good condition

Condition: used, Steel Bench Grinder, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables - all 3 workstations with swiveling tables, feed adjustment via handwheel - one workstation (the 4th) with a swiveling and tilting table, feed adjustment via handwheel - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels Ø 200 mm mounted - Forward and reverse running at each station - Coolant system integrated in the machine base Required space (L x W x H): 1100 x 1000 x 1300 mm Weight: approx. 450 kg Iedodz Srkjpfx Am Deat good condition

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Iaodpfxed E A I No Am Dst Weight: 400 kg Good condition

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Ijdpfx Ajd Rmcmom Djat Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Iaedohbal Dspfx Am Djt Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: used, Surface grinding machine BLOHM type HFS 6 make no.: 10493 year of construction 1973 Electro magnetic clamping plate 600 x 300 mm grinding length 600 mm grinding width 400 mm table longitudinal movement max. 650 mm transversal movement 350 mm distance spindle center - table surface max. 600 mm distance spindle center - magnetic plate max. 517 mm Clamping surface table 1020 x 300 mm grinding wheel diameter 300 mm grinding wheel width 50 mm grinding wheel bore 76 mm table longitudinal feed 2-30 m/min infinitely variable table cross feed 2-65 mm stepless electric cross feed 3 m/min vertical feed 0,001 - 0,020 mm per infeed pulse vertical feed 0,250 m/min grinding wheel speed 1400 / 2800 rpm. Motor power hydraulic pump 2,2 kW Motor power grinding spindle 5 / 6 kW Mains connection 380 Volt, 50 Hz. Total power 11 kW - automatic depth adjustment - hydraulic longitudinal table movement - grinding wheel dresser on the headstock - electromagnetic plate height 83 mm - coolant system adjacent, with magnetic filter in filter housing - grinding spindle circulating lubrication - adjacent control cabinet (800 x 500 mm) - swiveling control panel - operating instructions and spare parts manual space requirement L x W x H 3000 x 2200 x 2100 mm weight surface grinding machine 3000 kg weight switch cabinet 200 kg good condition Iasdpfx Aed Hbafsm Dot

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Iodpfx Amenzt A He Deat Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Iajdpov Amryefx Am Djt Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Iajdpfx Aov R E Rdsm Dst Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps Ijdpow A Af Isfx Am Djat - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Iasdswva I Hopfx Am Dot Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Iasdpfx Ajdzp Tcjm Det Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Iodpfoy Suavjx Am Dsat

Operating hours: 16,982 h, condition: used, machine/vehicle number: 24-02577-3, Temperature control unit from manufacturer Tool-Temp, used and untested. The unit is intended for applications in tool temperature control, injection molding, and process engineering. It operates in a single-circuit system and is equipped with the TT-380 control system. Designed for use with oil*, with a maximum supply temperature of 360°C*, a heating capacity of 24 kW*, and a pump capacity of 90 l/min at 5.5 bar*. Year of manufacture is unknown; operating hours are indicated as 16,982. Accessories are limited to an operating hours counter. Iajdpfxoy Suaie Am Dst

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Iedjy St Uropfx Am Dsat

Condition: excellent (used), Number of knives 24 z= width 15/20 mm circle diameter 240 mm Iaodoywzwxopfx Am Det material Stahl HM Bore diameter 30 mm

Condition: excellent (used), Diameter 145 mm Width 17 mm Bore 40 mm Number of knives 2+2 z= material Stahl Ijdpfx Asyz Dfgjm Doat knife system WP

Condition: good (used), Number of knives 2 z= width 60 mm circle diameter 120 mm material Stahl WP Iedpfx Ameyiu R Uo Djat Bore diameter 30 mm

Condition: used, length ~ 450 mm width ~ 650 mm height ~ 1.100 mm Iedjx R Ttljpfx Am Doat Battery-powered hand strapping tool BW-03 with 2 x battery, charger and Cyklop dispenser and 2.5 rolls of strapping.