Used Drilling Tools for sale (38,459)

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Redpfx Asx S Rcmsnyocf

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm Rcsdpfor U St Uex Anyef - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Redpfsiy Ekvex Anyjcf Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table Rcsdjghtvaopfx Anyof - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages Rcsdpjr D T U Dsfx Anysf - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Type: S3-50 Rcedpsx Dbltofx Anyjf Year: 2012 Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Rcedpfxow Rr A De Anysf

Condition: used, Jig boring mill, fine boring mill, plate boring mill, bench boring mill, boring mill, milling machine, row drilling machine, multi-spindle head, drill, drilling tool, reamers, quick-change tapping chucks -Extensive range of tools: for drilling/reaming/thread cutting -Content: see pictures -Tool cabinet: 7 drawers -Dimensions: 720/720/H1000 mm -Weight: 454 kg Redpfxofngw Uo Anyocf

Condition: good (used), Tool cabinet -with: spare parts for toolmaking, fixture construction Redjb A Rcwopfx Anyscf -Various drill bushings: different sizes -various clamping elements -Dimensions: 670/300/H2000 mm -Weight: 200 kg

Condition: excellent (used), For sale: Professional tool grinder by HASBERG, model FSS. German-made, solid and precise construction. 📊 Technical data: Manufacturer: HASBERG Model: FSS Year of manufacture: approx. 1976 Power supply: 3-phase 220/380 V Motor power: 250 W Speed: 2750 rpm 🛠 Condition: The item is used, shows normal signs of wear, and is in good technical condition. The machine is fully functional and ready for operation. 📦 Included: Set of collets (various diameters – as shown in the photos) Additional grinding wheels Rcsdpfx Aey A Tqzenyef Accessories as visible in the photos ✅ Advantages: Very robust construction (German quality) Large set of collets (high value) Precise machining and tool sharpening Ideal for workshops, tool rooms, or production ℹ️ Additional information: The set for sale is exactly as shown in the pictures. Inspection on site possible. Shipment on a pallet or personal collection possible.

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm Rjdoyxy S Ropfx Anyscf - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams Rcsdpfx Asnzt A Hsnysf - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, Drill grinding machine GÜHRING, Type SS 15 Spiral drill grinding machine Manufacturer's No. 909, Year of manufacture approx. 1977 Drill diameter max. 40 mm Grinding wheel diameter, right 300 mm Grinding wheel diameter, left 250 mm Grinding wheel width 40 mm Grinding spindle speed approx. 2800 rpm Motor power approx. 2.2 kW Redpfxjdzp Tbs Anyocf Power connection 380 Volt, 50 Hz - Point angle infinitely adjustable - Tapering device - Gear motor for vertical oscillation in front of the cup wheel - Diamond dressing holder - Various drill chucks - Coolant system Space requirement L x W x H 1200 x 950 x 1550 mm Weight approx. 1150 kg

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Rcedpfsx Tp Ahjx Anysf Make: DEGEN Type: UTB Year: 2005

Condition: new, Drill head E-150 Rcedpfjdkg Rmex Anyof Working range: 120 - 150 mm with mounting shank: MK 5 with coolant ring Cutting inserts made of material HSS-E-PM ASP 30, ASP30 TiN, centering drill HSS

Condition: good (used), Year of construction: 1993, Tool holder SK40, speed range 20-4000 rpm, clamping area 1,100 x 600 mm. Rodpfjlcbggex Anyscf

Condition: good (used), Friedrich Deckel FP 2 LB Toolroom Milling Machine The accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is characterized by its extremely stable base frame and is designed as a traveling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for the direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as those found in American V8 engines. The long travel of 800 mm is also advantageous in this application. Technical Specifications: Deckel Universal Milling Machine FP 2 LB Digital Display: 3-Axis Digital Display Heidenhain X-Axis Travel: 800 mm Y-Axis Travel: 300 mm Z-Axis Travel: 400 mm Tool Holder: SK 40, Drawbar Thread S 20 x 2 Milling Head Type: Vertical Milling Head Speed Range: 40 - 2000 rpm Number of Steps: 18 Table Type: Universal Swivel/Tilt Table (± 45° / ± 15°) Table Clamping Area: 1000 x 520 mm Rsdpfxegyw S Te Anyscf T-Slot Size: 16 mm Vise 160 mm Power Consumption: 9.5 kVA Weight: Approx. 1900 kg Dimensions: Approx. 1570 x 1675 x 1850 Financing through our bank is also possible. komplett-konzept.leasingo.de Other Items - New and Used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2023, turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock - Tool changer (Tower) with 8 positions Redpolar N Nefx Anyecf OPTIONAL INCLUDED - - piece support (Lunete)

Condition: used, diameter / mm Cutting (quantity) / weight / kg VISIONTOOLS SET OF 4 MDL600 LED MODULE LIGHTS, WHITE 08K0008B Rjdpfx Aey Suxfjnyocf Item number: 08K0008B Condition: used (in working order)

Condition: excellent (used), 595 x 395 mm Clamping pressure -70 bar Rjdpfxeiz A E Eo Anyocf MARCELS MASCHINEN AG

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Redpfezux Iysx Anyecf Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: BT 30, working width: 350 mm, area performance: 1,350 m²/h, overall weight: 61 kg, warranty duration: 24 months, tank capacity: 12 l, total height: 760 mm, total width: 560 mm, total length: 860 mm, water tank capacity: 12 l, battery voltage: 24 V, battery capacity: 39 Ah, empty load weight: 61 kg, operation weight: 80 kg, New scrubber-dryer 2026, battery-operated with charger, 1350 m²/hour, 12 liters of fresh water, 7 liters of wastewater, for cleaning smaller hard floor surfaces, for example in restaurants, canteens, and showrooms, operating time approximately 2 hours, best quality at an unbeatable price, with 2 key cards for starting, digital operation, easy to use. Rcodezv Hwlopfx Anyjf

Condition: new, Product description: The EPS LINEAR automatic length stop system, which can be easily mounted on a new or existing machining center. This system allows products made of various materials and with different lengths to be measured quickly, easily, and accurately. EPS LINEAR is a length stop system that is widely used in the wood, plastics, aluminum, and light steel industries. The system is very easy to operate and accepts inputs in millimeters and/or tenths of a millimeter. The system can be installed either to the left or right of the machining center. Rcodetd Tndjpfx Anyef The system is available from 1 meter and can be extended up to 14 meters. Specifications of the EPS LINEAR: Speed: up to 40 meters/minute. Holding force: 1800N Accuracy: +/- 0.10 mm Voltage: 230V, control voltage 24V Buttons: Start, Stop, reference, measure probe on/off, button for parameters Displays: actual value, desired value Emergency stop: this button immediately stops the EPS LINEAR Screen: touchscreen with large indicators and a clear layout of buttons Attachment: very easy to switch on and off for short pieces Software: fully proprietary, kept up to date in-house Components: industrial components and maintenance-free Cables: cables, including cable track, are supplied up to a maximum of 14 meters. Our advertisements have been prepared with the utmost care; typographical and specification errors are reserved.

Condition: new, functionality: fully functional, * Diameter: 510 mm Rsdpfxjzp Dxys Anyocf * Cutting width: 4.0/3.4 mm * Bore: 30 mm * Number of teeth: 120 * Tooth shape: Trapezoidal flat * Secondary holes: 2/10/60, 2/10/70 6 pieces available.

Condition: good (used), Tools , drills will come without tool cabinet . Rcsdpfxozd D N Ie Anyef Tool trolley with toolholders will come.