Used Cuve Inox for sale (421)

Condition: used, maximum load weight: 57,900 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, first registration: 06/2024, next inspection (TÜV): 07/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpts from the equipment list. Complete specifications available upon request. Gooseneck: * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm in length * Rear of the gooseneck with bevel of approx. 1,000 mm x 10° * Technical fifth wheel load: 30,000 kg Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading platform: * Telescopic loading platform, approx. 8,800 mm in length, with rear ramp approx. 500 mm x 10° Axles and suspension: * BPW axles and suspension * 1st axle steered, equipped with electromagnetic reverse lock; all other axles hydro-mechanically forcibly steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * 235/75 R 17.5 3PMSF twin tyres, load index 143/141J (144/144F) Brake system: * WABCO EBS-E braking system, compliant with EU regulations Paintwork: * Trailer colour: RAL 3002 Carmine Red Accessories included: * Removable steel front wall, approx. 400 mm high * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches; without installation of power connections on the tractor unit * Stowage position on the gooseneck for warning signs when not in use * 1 mounting adapter for spare wheel in front of the gooseneck front wall (without spare wheel) * Outer carrier on the gooseneck with fixing holes for bolt-on lashing rings. First hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of removable ALU sidewalls, approx. 400 mm high, anodised * On the gooseneck, 1 removable ALU rear wall, approx. 400 mm high, anodised * Approx. 40 mm thick hardwood flooring over the gooseneck, checker plate over the kingpin * 2" kingpin Isdpfx Aexuypreanotr * Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B * On the loading platform: continuous and axially interrupted approx. 50 mm thick hardwood flooring * Platform locking with conically welded locking profiles approx. every 500 mm * Slotted holes for hook-in and repositionable bridging elements: at front of loading platform * 1 sliding intermediate table, approx. 300 mm wide, for the high cross-section telescopic tube with checker plate surface; front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front crossmember (LC 10,000 daN) * 7 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN) * Extendable galvanised platform widenings by approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering from front and rear operable via cable remote control with buttons, with single-track axle alignment, without installation in tractor unit * Cable (approx. 35 mm², approx. 3.5 m long) with connectors (NATO-NATO) between trailer and tractor unit for supplying the electro-hydraulic unit and/or electric winch * 2 additional pairs of bolt-on lashing rings (LC 5,000 daN) * 1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm (L x W x H), straight design, with 2 external side doors and 1 top lid, located behind the front wall

Condition: used, This listing is for the Bio-Rad PC Module for the Gene Pulser Xcell The unit is in full working condition and is ready for immediate release The Bio-Rad PC Module for the Gene Pulser Xcel is a component of the Gene Pulser Xcell Electroporation System, designed for high-efficiency electroporation of prokaryotic cells, including bacteria and fungi. Gene Pulser Xcell PC Module Overview The Gene Pulser Xcell™ PC module is a part of the Gene Pulser Xcell system, a modular electroporation system that consists of: A main unit Two accessory modules: The capacitance extender (CE) module The pulse controller (PC) module The ShockPod™ cuvette chamber The PC module is recommended for electroporation of bacteria, fungi, and other applications requiring high-voltage pulses applied to small-volume, high-resistance samples. It includes integral leads for direct connection. Key Features of the PC Module Pulse Type: Delivers exponential decay pulses, ideal for bacterial and yeast transformation. Optimized for Small Volumes: Suitable for samples with high resistance, ensuring efficiency. Compatibility: Works with the Gene Pulser Xcell main unit, allowing modular expansion. User Interface: Programmable with predefined and customizable electroporation settings. Required for Operation Iodpfx Aajxwc Ezsnotr The Gene Pulser Xcell PC module requires the Gene Pulser Xcell main unit for operation. PC Mudule for Gene Pulser

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm Iodpfx Aoxmiirjanstr 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: excellent (used), Year of construction: 2024, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, working width: 400 mm, warranty duration: 12 months, power: 15 kW (20.39 HP), Fast and efficient UV drying tunnel for oils and lacquers. Delivers instant curing and a durable, high-quality finish. Itodpfexuibkox Aanjr Equipped with adjustable UV lamps (50–100%) and a heat- and UV-resistant INOX mesh belt. Lamp type and configuration (mercury or gallium, 5 kW each) available on request. Before sale, the machine is fully cleaned, serviced, and tested.

Condition: excellent (used), Used stainless steel tank / transport container / IBC Iedpfx Aexr Axkeanetr Previous application: Chemical Item number: 10886 Volume: 1000 litres Type: Upright in galvanized stack frame Material (product-contact): 1.4301 / AISI 304 Manhole: 395mm Design: Single-walled Operating pressure as per nameplate: +0.30 bar Tank dimensions: Overall width: 1100mm Overall length: 1200mm Overall height: 1655mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Features: Identification plate: Yes Outlet diameter: 45mm Outlet valve: Ball valve Distance outlet to floor: 225mm Empty weight: 275kg

Condition: used, Used PET Krones Complete Bottling Line CSD Sparkling Water 16000 bph 1.5 L Iodpfxew Hm Nfo Aanstr Advanced PET Bottling Solution for Carbonated Beverages This used PET Krones complete bottling line delivers a fully integrated, high-capacity solution for bottling carbonated soft drinks (CSD) and sparkling water in 1.5-liter PET bottles. Engineered for performance and reliability, the line seamlessly combines blow molding, filling, labelling, packaging, and palletizing technologies to achieve a throughput of up to 16,000 bottles per igned for versatility, it can accommodate various bottle shapes and provides a robust platform for industrial beverage production across a wide range of carbonated products. At the core of the line is the Krones Contiform stretch blow molding system (S16), equipped with an automatic preform feeder and an integrated chiller. This system ensures precise and consistent bottle forming, maintaining high-quality standards throughout the production run. An air conveyor, specifically designed by Krones, efficiently and gently transfers empty PET bottles from the blow molder directly to the labelling and filling stations, minimizing the risk of deformation or contamination. Integrated High-Speed Filling, Labelling, and Quality Control After bottle production, the Krones Contiroll labeller applies wrap-around labels to the empty PET bottles with high precision. The labelling station supports high-speed operations, ensuring perfect label placement for consistent branding and shelf impact. Immediately downstream, the Krones Mecafill isobaric filler, specifically engineered for carbonated beverages, ensures uniform fill levels, stable carbonation, and effective foam control. This filler is also equipped with a metal detector at the outfeed, providing essential quality control by detecting and rejecting bottles containing metallic contaminants. The process section of the line features a Krones Mixer, responsible for the accurate preparation and blending of water and beverage syrups for both still and carbonated drinks. This equipment manages CO₂ dosing, degassing, and temperature control, guaranteeing product consistency and carbonation quality. For product traceability and regulatory compliance, a Hitachi RXS-SD160W inkjet printer marks each bottle with batch codes and expiry dates. Comprehensive Secondary Packaging and End-of-Line Automation Following filling and capping, bottles are conveyed by Krones transport modules to the secondary packaging area. In this section, a Krones Variopack shrink tunnel collates bottles and wraps them into stable packs, with a throughput of up to 45 packs per minute. For packaging formats requiring cardboard supports, a Twin Pack MDE INOX single-lane handle applicator provides ergonomic handling and secure pack er packaging, Krones conveyors move the packs to the palletizing area, where a Kettner Pressant Universal palletizer arranges them onto pallets with precise stacking patterns, suitable for different pallet types and bottle formats.

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Itedpjxttc Asfx Aansr Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: good (used), Features: • Accurate, Rapid, Easy to Use • No Cell Alignment or Calibration • Temperature Control, 5 - 75° C • Customizable Reports, SP Charts, Two-Parameter Plots, Graphical Overlays • Integrated Computer The Brookhaven ZetaPlus is designed for rapid, accurate and, above all, straightforward determination of zeta potential and electrophoretic mobility of fine particles from around 5nm up to about 50µm. Its principle is the measurement of the Doppler shifted frequency spectrum of scattered laser light using a known reference frequency for maximum accuracy. The key attraction of the ZetaPlus is its simplicity of operation due to the innovative design of its sample cell – electrode assembly. Using low cost, disposable cuvettes and simple "plug-in" electrodes, it completely eliminates the problem of electroosmosis – for all samples. With this system, cell alignment with respect to the laser beam is no longer critical and therefore requires no periodic checking or adjustment. Bubble-free filling of the cell is easy and fast and the volume of sample required is minimal. Iedoupafvopfx Aanetr Sample temperature is accurately controlled by a fast response dual-Peltier system operating in the range 50C to 750C. For most common liquid media, necessary physical constants are all pre-programmed throughout the temperature range. pH can be read directly into the ZetaPlus software. Zeta potentials can be automatically plotted against pH or any other variable of the user’s choice, such as surfactant or additive concentration.

Condition: good (used), functionality: fully functional, Capacity: 12 L/cycle Solvent distillation time: 3.5 – 4.5 hours Optimal filling volume: 12 L (max. 15 L) Filling pump: 18 L/min (optional) Residue removal: Distillation bags or tilting Power consumption during heating: 1.04 kW Voltage: 230 V Itodpexfvfqsfx Aansr Distillation temperature: 40 – 180°C Boiler insulation: Non-flammable mineral wool Condenser: Acid-resistant stainless steel (INOX) Cooling: Fan-cooled (EX version) Certification: EX II 2G IIA T3 Approved for use in ATEX Zone 1 Dimensions: 60 x 60 x 145 cm Robust construction Weight: 75 kg

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Isdewgc Udjpfx Aanjtr Cast wort capacity: 20 hl Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank

Condition: excellent (used), Used stainless steel vessel / transport container / IBC Previous application: Chemicals Item number: 10885 Capacity: 999 liters Type: Vertical, in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole: 400 mm Version: Single-walled Operating pressure (as per nameplate): -0.6/+3.0 bar Operating temperature: 20 °C Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1750 mm Materials: Internal: 1.4301 / AISI 304 External parts: Galvanized steel Features: Nameplate: yes Outlet diameter: 45 mm Outlet valve: Ball valve Distance from outlet to floor: 270 mm Ball valve on the top panel Empty weight: 288 kg Isdpfjxr Ardex Aanjtr

Condition: used, Year of construction: 2000, Used Labeler Kosme Kosmac 6r1s3s ADH year 2000 – 3000 bph Manufacturer: Kosme Model: Kosmac 6r1s3s ADH 3 adhesive groups A state seal with glue Direction of rotation clockwise Itsdpfjvguw Ssx Aanjr Refurbishment by replacing all parts subject to vulcanization (sponges, rollers, etc.) Processed bottles: Spumante Collina, Spumante Cleo, Bacchus, Extra, Cuvee, Campana, Splia.

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back Itsdpfx Aajvgnm Honer gauge is about 65000,--. Machine dealer with own stock of 1600 m².

Year of construction: 2024, condition: new, The semi-automatic filler is the perfect solution for small companies that produce up to 5000 bag-in-boxes per year. The system is equipped with: an electromagnetic flow sensor; an electronic control panel - for programming the filling quantity (minimum 1 liter) and - for performing the calibration; and a self-priming pump with a EURO 20 rubber impeller. At the beginning and at the end of the cycle, the vacuum should be controlled by the user and the injection of nitrogen should be managed by means of two manual pulsar valves. The valve is opened and closed using the two stainless steel tools supplied as standard. Drip collector buffer is included in the scope of delivery. The inox holder of Bags has an adjustable height and can be removed. The user selects the desired filling quantity and turns the switch on so that the filling cycle can begin. The filler performs a complete cycle: Opening the valve / Starting the pump / Stopping the pump / Closing the valve. - Touch screen operation for programming capacity and calibration; - Digital flow meter max. 7000 l/h - Stainless steel table with adjustable and removable support, with 4 adjustable feet - Stainless steel filling head - Pulse valve for manual nitrogen injection - Blocking system for the filling head - Drip-free filling Itedpfetpxtiex Aansr - Automatic start and stop for an external pump - Double semi-automatic system for opening and closing the connection - Capacity for filling flexible bags or pouches (high or low type) from 1 liter capacity - S/S- Suitable for cleaning circuit (CIP) Technical data: - Electrical requirements: 220V 50-60 Hz - Suitable for: Ø 20 - 25 mm - Capacity: 5 lt/h 150 pcs. - Capacity: 10 lt/h 100 pcs. - Capacity: 20 lt/h 40 pcs. - Dimensions: 740x900x720 mm - Weight: 50 kg

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. Iodpfx Aaovubapjnstr The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: excellent (used), Year of construction: 2017, Pellet production line ANDRITZ PALADIN 2,5 t/h Year - 2017 , Only Press 2012 Working hours - 6.600 Exellent condition !! 1. Hydraulick - Electro crane for feeding logs 2. Logs Debarker 3. Wood chepar - 65 x 115 cm - 315 Kw electro motor 4. Hydraulic floor - New (additional field) 2 x fields 8x2m. 5. Input Lateral Transporter (606x606) Drive: hydraulic drive 5,5kW, 4hydrocilinders. Serves for raw material feed and up to 50 ° (chop and sawdust) up to 30m in length. For the towel element, Gal's transport chain is used, with hardwood slats attached to it, and the name of the flywheel carrier. It consists of a zipper, angle, flat and drive module. Drive: Hellicocentric 7.5 kW gearshift gear, class IE2. 6. Input silos Hydraulic drive 5,5kW, 2 hydrocilinders. 7. Double screw feeder Screw feeder ~4m with two screws. Used for feeding material into drying drum (through rotational valve). 8. Industry furnace – 2,5 MW (new burners, new generation). Zmaj 2,5MW is furnace designed specially for air heating in process industry. It uses exclusively pellet as fuel. It consists of 6 separate burners with automatic pellet feed. By burning pellet, furnace reaches preset temperature of air. Thermal power: 1.2MW. Volume of burner chamber: 3m3. Number of burners: 6. Power per burner: 200kW. Control: separate for each burner. Insulation: Tervol HTB 700 9. Hot air mixer Capacity: 48.000 m3/h. 10. Rotary drum dryer 3t/h Drive: 2 x 5,5kW. Capacity: 3t/h. 11. Pipelines 12. Cyclone separator 2900 Cyclon separator 2900 is part of air transport system used for separation of transporter fluid (air) from transported material (particles of sawdust). It is conected to SC fan – a drive element for air transport system. It's placed directly over the rotational valve and hammer mills. Delivered with support construction. 13. Rotational valve B (x6 small used, 2 new) Power: 3kW. Big sized rotor. 14. Hammermill 3t/h Hammers: S=10mm, HARDOX. Capacity: 3 t/h. 15. SC CB fan It consists of a chassis, a chassis, and a drive. The fan's inlet is connected with a single 1800 cyclone and the outlet with the Ø900 pipe funnel. Serves air transport from hammer mills. Capacity: 48.000m3/h. Drive: 55kW. 16. SC fan Capacity: 48.000m3/h. Ijdpfxjq Rfhds Aanotr Drive: 50kW. 17. Cyclone1700 (x6) 18. Support construction for cyclone battery With maintenanace platform. 19. Screw feeder CB 20. PELLET PRESS ADNRITZ PALADIN 1600 ( 2 x 90 Kw ) Screw feeder beneath the cyclone battery ~5m. 21. Homogenizer – New. (new generation) Device for biomass homogenization. Provides autonomy for rest of the process. Drive: motor-reduktor 5kW. 22. Bucket elevator – Homogenizer Tranporting device for sawdust. INOX buckets, rubber belt. Drive: 3kW. 23. Preconditioner Konditioner without screw feeder. Directly influences quality of pellet and pellet press tool endurance. 24. Automatic Packing unit - 6t/h

Condition: new, functionality: fully functional, total height: 3,365 mm, total width: 1,800 mm, overall weight: 455 kg, tank capacity: 5,956 l, warranty duration: 12 months, inner diameter: 1,800 mm, TECHNICAL SPECIFICATIONS - Brand : ARSILAC Itjdpjwalmvofx Aansr - Model : STOIPSER6200 - Material : INOX 316L - Total capacity : 5 956 litres - Bottom: flat inclined, 4% slope - Roof: off-centre conical - Interior finish : bright annealed - Exterior finish: brushed ROOF : - 1 hatch diameter 220 mm off-centre with H.300 mm - 1 DN 40 chimney tapping MÂCON with plug VIROLE : - Lifting rings - 1 ladder support - 1 rectangular door 420 × 530 mm positioned 300 mm from the bottom of the shell and opening outwards - 1 partial drain with 100 × 100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 1 DIN15 tasting tap - 1 needle thermometer - 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) - 3 turns of coil on the top of the ferrule - 3 turns of coil on the shell above the door - 2 turns of coil around the door - Total exchange surface area 5.51 m² - Maximum pressure on coil circuit: 1.5 bar - 1 inlet and 1 outlet on each coil circuit, 1‘ 1/4’ male gas connection - 1 connection with immersion sleeve for control probe - 1 identification plate BOTTOM : - 1 total drain with square flange 100 × 100, stainless steel ball valve 40 Mâcon and stainless steel plug - 1 boitard 450 × 100 × 200 mm - 1 connection 50 MÂCON with plug on box - 4 stainless steel feet, height 500 mm, adjusting screw and plate DIMENSIONS - Diameter: 1800 mm - Ferrule height: 2250 mm - Total height: 3365 mm - Weight: 455 kg - Roof thickness : 15/10ᵉ mm - Shell thickness: 15/10ᵉ mm - Bottom thickness: 20/10ᵉ mm

Condition: used, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) Itsdpfxsvxz Als Aaner In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles.

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire fleet of vehicles—including those available for immediate or short-term delivery—on our website. Extract from the equipment list. Complete equipment details available upon request. Cargo area: * Extendable cargo area with pneumatically operated locking mechanism * Cargo area with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Landing gear: * JOST mechanical landing legs with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 385/65 R 22.5 tyres Axle: * BPW axles and suspension, all axles hydro-mechanically forced-steered * With disc brakes * Technical axle load: 10,000 kg (ET 0) * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Itodpfx Aaexl Nf Donor Paintwork: * High-quality 2-component (2K) topcoat in single-tone RAL 3002 Carmine Red Accessories: * Steering from front and rear, operated via cable remote control with push buttons, with single-track axle monitoring (without installation in towing vehicle) * Electro-hydraulic power unit * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * Galvanised connection strip at the front with yellow-red air couplings * Mounting bracket for rotating beacon at the rear of the trailer * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the cargo area * 1 spare wheel holder under the cargo area on the right-hand side (no spare wheel included) * Load gauge for determining axle loads, including load diagram Including special accessories: * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the cargo area for 1 x 20' container, 2 x 20' containers or 1 x 40' container; additional locking point in the extension for a 45' container * 4 crosswise pairs of stake pocket rails mounted in the cargo area for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes, screwed to the inside of the front wall * Boarding ladder mounted left and right in the direction of travel * INOX toolbox approx. 1,200 x 460 x 550 mm, mounted at the front under the cargo area on the left in the direction of travel * Additional INOX toolbox approx. 1,200 x 460 x 550 mm, under the cargo area on the left in the direction of travel * Cargo area with approx. 30 mm thick wooden floorboards framed in omega profiles * Lift axle on the front axle with control via TEBS E * BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM Metallisation (High Resistance Metallisation)

Year of construction: 2018, operating hours: 1,000 h, condition: excellent (used), Work table: 4x2 m, table with grill Cutting head in 5 axes (with jet taper compensation) Hydro-abrasive cutting Anti-collision device Height detection device Itedemzbqmopfx Aanjr Laser projection device for defining the origin (zero point) Electronic system for control and detection of the abrasive Pressurized gas supply system (270 kg) Remote control for managing up to 6 axes OSAI Open-M numerical control Pump (pressure intensifier) 30HP CAD-CAM TC2020 and 3D TC2020 software license The car delivered complies with CE Norms The machine was used for 1000 hours, then it was transported and is being dismantled It has all the components and they are all functional

Condition: new, Year of construction: 2021, We sell 6 units new pneumatic dispenser in stainless steel inox electro-polished, volume 18 kg, made in Italiy by GMC, model 402E, complete ready to use with : 1 manual high pressure spraygun with adjustable flow, brand Wagner Air, model Colora SP5, 08 mm 1 universal nozzle 1 manometer Itodpfx Ajtu Enqjaner 1 hose 4 meter lenght 4 system are with high pressure spray gun 2 system have no high pressure spray gun The price for the system with high pressure spray gun is Euro 750 The price for the system without high pressure spray gun is Euro 650 The price for the whole package of 6 units can be: Euro 3.600 Price 750 Euro + VAT, negotiable, FCA and packed Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: used, functionality: fully functional, total height: 4,204 mm, tank capacity: 14,500 l, inner diameter: 3,226 mm, TECHNICAL SPECIFICATIONS - Manufacturer: SERAP - Year: 2019 - Insulated, truncated cone-shaped 304 stainless steel tank - Interior tank with sheet metal finish: Bright Annealed (2R) - Exterior tank with sheet metal finish: -- Dome: 320 grit polished -- Shell: fine grit circular polishing + ‘Scotch Brite’ finish -- Bottom: Cold rolled (2B) - Heat exchanger characteristics: -- Connection: Ø20x27 female Itjdswvu Nrjpfx Aaner -- Test pressure: 10 bar -- Maximum operating pressure: 6 bar -- Exchange surface area: 10.0 m² - Maximum operating pressure in the tank: -0.002 / +0.05 bar - Insulation: polyurethane foam injected onto the ferrule, base and dome Roof - Central chimney with round door Ø900, frame height 100 mm with hinge - Chimney with articulated safety grille Ø1000 with shutters - Chimney with oxygenation nozzle - M 20x27 Gas end piece + F/F valve - DN50 pressure and vacuum valve Ring - Pump discharge column - MAC73 valve kit on MAC43 connection and outlet - MAC 43 pap valve kit + removable CD DN 40 - AIS 410X530 4L SS CAD+ACC rectangular door - MAC43 tasting tap with cannula Bottom - Removable filter bottom in 6 parts - ‘Euroslot’ type maceration grid - INOXPA RV65 refill pump - 150 HL/H Other - Pump control panel DIMENSIONS - Height: 4204 mm - Diameter: 3226 mm

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper Itjdpfx Aasvguttsner The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Measurements: Length: 800mm Width: 900mm Height: 2600mm Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: like new (used), Year of construction: 2018, operating hours: 100 h, 135 tons length 3000mm Itsdpjmzbplefx Aansr The machine is like new Comes with additional software to calculate production cost

Condition: used, Year of construction: 2003, functionality: fully functional, tank capacity: 164 l, operating pressure: 6 bar, TECHNICAL SPECIFICATIONS - Year: 2003 - 1 housing with 6 cartridges - 2 housings with 3 lenticulars - Housing : BEGEROW - Housing type : M0340650 - Max. working pressure 6 bar - Max. operating temperature : 120 °C - Volume : 164 litres Itsdpowal Dnsfx Aanjr - Inoxpa wine pump - Dosing pump - Automatic