Used Agitator for sale (469)

Condition: used, total width: 1,900 mm, total height: 6,500 mm, diameter 1.90m Bedezwm U Tspfx Abtodg height 6.5m on legs and agitator

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 1,00,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Bdedjzhnlzopfx Abtsg Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, Year of construction: 2020, functionality: unexamined, Zhengzhou A/X Machinery waste wood processing plant comprising: AS-1200 hopper fed 5 ton per hour double shaft pallet shredder magnetic belt cross conveyor 2m 6m incline conveyor 3T Shredder Complete with Y2805-4 75kw drive motor Sawdust 11kw fan blower & cyclone hopper with sawdust collection bin screw elevator conveyor HT Furnace HGJ.3 sawdust dryer 11kw with Nu-wy B55-2H 135-800kw x 182 degC burner 4-vertical column gradual heat transfer chamber drying system 4-zone dryer controls & secondary drive fan 11kw Bdsdezx Tfzspfx Abtsg 5m incline conveyor 3m incline conveyor cylindrical glue bin with IBC Weighcell, Greaves spiral mixer agitator 6m incline 4kw motor screw conveyor 2 - 3m horizontal screw conveyor 4m horizontal screw conveyor

Condition: excellent (used), Double-Jacketed Mixing Vessel / Pot – 650 L – Stainless Steel Industrial mixing vessel / pot with a capacity of 650 liters, made of stainless steel, equipped with a double jacket for heat treatment and a mixing system, designed for the preparation, mixing, heating, and homogenization of food products in industrial batch processes. The equipment combines a 650-liter vertical vessel with a motorized agitator and a double jacket, allowing mixing and heat treatment operations to be carried out in a single container. Its design is particularly suitable for products that need to be kept in motion during heating to achieve a uniform distribution of ingredients and temperature. MAIN FEATURES -Type: Industrial mixing vessel / pot with agitator -Capacity: 650 liters -Vertical configuration -Double jacket for heat treatment -Integrated mixing system -Agitator with motorized drive -Mixing and homogenization of the product -Stainless steel construction -Large-capacity process vessel -Curved bottom -Sanitary product connections -Bottom discharge -Robust structure on legs -Designed for batch processing -Hygienic construction for the food industry -Integrable into existing production lines Bdodpszxcd Hefx Abtjg PROCESS The vessel is designed to receive the ingredients and continuously mix them using the internal agitator. The double jacket allows for heat treatment of the product, which can be used for heating, temperature maintenance, or cooking operations, depending on the product and the available thermal services. Agitation during the process promotes homogenization of the ingredients and a more uniform distribution of the temperature, making it particularly useful for liquid, semi-liquid, and viscous products. It can be used for: Mixing and homogenization Heating Cooking Temperature maintenance Dissolving ingredients Preparation of formulations Production of sauces, creams, and purees Preparation of fillings and formulated products APPLICATIONS Especially suitable for canning industries, sauce manufacturers, ready-meal producers, vegetable product manufacturers, cream and puree manufacturers, filling manufacturers, and other food industries that require a versatile mixing and heat treatment equipment. The combination of a 650-liter capacity, double jacket, motorized agitator, and stainless steel construction provides a robust solution for industrial processes involving preparation, cooking, and mixing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Machine: Tank agitators Bdodpezx A N Njfx Abtog

Condition: used, Year of construction: 2018, REF: MM6441 Bdodoza T Slepfx Abtjg Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: used, Pastochef Range Electrical power Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Drying program after washing Bodpfxozx Un Rj Abtjdg Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.

Condition: used, PSK series, older generation Tank capacity: 40 to 120 L Standard power supply: 220/380 V three-phase 50 Hz Installed electrical power: 15 kW Electric heaters: 6 × 2.2 kW Compressor power: 3.5 kW Agitator motor power: 0.65 kW Minimum water pressure: 2 atm Water consumption: 400 L/h Thermal fluid: inhibited glycol + water Thermal fluid quantity: 22 L 3-digit digital display 6 operating controls 4 programming controls 7 indicator lights Bsdpfjzx Uhqsx Abtjdg Pasteurization temperature: 50 to 90 °C Programmable holding time: 0 to 30 min Continuous agitation during pasteurization Automatic cooling down to +4 °C Automatic holding at +4 °C Agitation: 15 s every 15 min during holding Discharge by gravity or with agitation Water inlet control to the tank Water control for cleaning the tap Dimensions (L × W × H): 640 × 880 × 1065 mm Net weight: 255 kg Cattabriga PSK 125 ice cream pasteurizer – capacity 40 to 120 L General overview The Cattabriga PSK 125 ice cream pasteurizer is designed for the thermal treatment of mixes used in the production of ice cream and artisanal gelato. This data sheet corresponds to the older generation PSK 125 identified on your machine, which is different from the newer KEL and PRO versions. Its working capacity ranges from 40 to 120 L, allowing for the processing of large volumes of mix in a single tank. What sets this model apart This version of the PSK 125 is based on a robust design combining electric heating, mechanical agitation, and a thermal circuit. The total installed power reaches 15 kW, with six 2.2 kW heaters. The agitator is driven by a 0.65 kW motor, while the compressor delivers 3.5 kW. The control panel features a digital display and controls for operating the machine without using the touch interfaces of the newer generations. Key advantages Capacity of 40 to 120 L for different preparation volumes Installed power of 15 kW, suitable for this tank capacity Integrated mechanical agitation during mix processing Thermal circuit using a mixture of inhibited monopropylene glycol and water Electronic controls with digital display Compact construction with a height of approximately 1065 mm

Condition: used, Used Charles Thompson model CT400 Hastelloy C22 Mobile Agitated Nutsche Filter Dryer Manufacturer: Charles Thompson Limited, UK Model: CT400 Type: Mobile agitated Nutsche filter/dryer Year: 2001 Filter diameter: approx. 400 mm / 15.7 in Filtration area: approx. 0.125 m² / 1.35 ft² Product-contact material: Hastelloy C22 External/jacket: 316L stainless steel Shell design: 3 bar/full vacuum Jacket design: 3 bar/full vacuum Design temperature: -30°C to +100°C ASME: Section VIII Div. 1 (1998) + A99 Bdodpfezun Hlex Abtjg Empty weight: 570 kg / 1,257 lb Agitator: single-blade, approximately 0.75 kW Agitator lift: hydraulic raise/lower Configuration: jacketed vessel on mobile stainless frame/casters.

Year of construction: 2019, condition: ready for operation (used), A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible. Bdsdjxhntrepfx Abtjg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, BOLZ stainless steel mixing vessel, 706 liters Pressure-resistant magnetic stirrer with heating jacket Vessel capacity: 706 liters Usable volume: 600 liters Bedpfx Aezqantjbtjdg Max. operating temperature: 150°C Nord Drives magnetic stirrer Power: 0.55 kW Manufacturer: Other Year of construction: 2006 Space requirement: 140 x 105 x 215 cm

Condition: used, tank capacity: 50,000 l, total width: 3,600 mm, total height: 8,700 mm, Insulated 50m³ stainless steel tank with heating jacket and agitator Diameter: 3.60m Height: 7.20m + 1.50m agitator = total height 8.70m The tank is insulated and lined with steel sheet. The heating strip is located in the lower half of the tank. The tank has a flat bottom. Bdodpfxszwm Nks Abtsg Gear motor power: 10 kW/15 kW. Mixing speed: approx. 20 rpm.

Year of construction: 2023, condition: used, functionality: fully functional, The item for sale is an unused stainless acid-resistant steel tank with a capacity of 85,000 liters, equipped with a mixer. Bdedpsxnm I Iofx Abtsg

Condition: excellent (used), Year of construction: 2014, HERMANN WALDNER Agitated Tank 90.5 L Pressure-resistant magnetic stirrer with heating jacket Tank volume: 90.5 liters Bdedpoyn Rikefx Abtjg Jacket volume: 18 liters Usable volume: approx. 70 liters Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +5 bar Manufacturer: Waldner Year of manufacture: 2014 Space requirement: 90 x 95 x 175 cm Complete documentation available.

Condition: like new (used), Year of construction: 2012, JANKE + KUNKEL TURBOTRON SFH ATEX agitator Generator version with propeller agitator Max. batch size: 200 liters ATEX version Infinitely variable drive up to 1,100 rpm Bodpswu Uk Hofx Abtedg Manufacturer: IKA Year of manufacture: 2012 Space requirement: 170 x 130 x 225 cm

Condition: used, Used Fryma stand agitator with tempering unit Item number: 10897 Type: stationary Overall height: 1930 mm Overall width: 1320 mm Overall length: 1650 mm Leg height: 100 mm Motor: Power: 11-15 kW Speed: 2910 - 3490 rpm Voltage: 50 - 60 Hz Agitator: Bdsdpfxeyzp Hvj Abteg Dissolver Diameter: 100 mm Shaft length: 260 mm Tank: Volume: 46 L Material (media-contact): 1.4301 stainless steel Inner diameter: 400 mm Outer diameter: 450 mm Cylindrical height: 365 mm Outlet diameter: 22 mm Distance outlet to floor: 450 mm Tempering unit Make: Tool-Temp Overall height: 920 mm Overall length: 720 mm Overall width: 300 mm

Condition: ready for operation (used), Used heatable/coolable pressure vessel with Atex agitator and insulation Last intended use: Pharmaceuticals, cosmetics Article number: 10815 Volume: 5600 liters Type: standing on 4 feet Material (in contact with media): 1.4571 / AISI316 Design: with double jacket and insulation Operating pressure according to nameplate: +1/+3 bar Max. operating temperature: 0/ +150 °C Container dimensions: Manhole: 500mm Outer diameter: 2000mm Total height: 2870mm Total width: 2250 x 2060mm Cylindrical height: 2000mm Materials: Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI304 Bdedpfx Aotdgkxebtog Facilities: Nameplate: Yes ATEX agitator Power: 22KW Speed: 1465/min Agitator: Propeller 2x spray head Connector

Condition: used, Equipment: type plate available, Electrically heated agitator tank with double jacket and insulation Article number: 10707 Volume: 300 L Type: Vertical, standing on 3 legs Leg height: 220 mm Material (product-contact): V2A stainless steel Design: Electrically heated Operating pressure according to nameplate: ATM (atmospheric) Tank dimensions: Internal diameter: 700 mm External diameter: 950 mm Cylindrical height: 730 mm Total height: 2030 mm Total width: 1120 mm Total length: 1340 mm Equipment: Nameplate: Yes Discharge to floor distance: 415 mm Outlet valve: Ball valve Outlet diameter: DN40 Opening: 235x750 mm Beam agitator Double jacket: 100 L Insulated Control cabinet Bodpjw Ic Niofx Abtedg Foldable lid 1/2

Year of construction: 2011, condition: excellent (used), functionality: unexamined, machine/vehicle number: 24, For sale: Mixer – Raw material mixer from a pellet production line. Thanks to the mixer, the raw material fed into the pelletizers is homogeneous. Capacity of the line in which the mixer was used: approximately 8 tons/hour. Mixer dimensions: External length: 6150 mm, External width: 1760 mm, External height: 2740 mm, Internal length: 5000 mm, Internal width: 1490 mm, Internal height: 1750 mm, Rib diameter: approximately 1400 mm, 22 kW motor, Mixer price: 23,000 Euros, We offer a bag filter for the mixer, visible in the photos of the production line. Filter price: 7,000 Euros, Bdjdpfx Abowxatbstog The machine can be viewed in: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: good (used), Equipment: type plate available, Ystral Type X 11,000 S/LDT-4-154P Disperser based on the rotor-stator principle on a stand, without control unit The YSTRAL disperser is designed for the production of emulsions and suspensions in the medium-viscosity range. It meets high requirements for fine dispersion, even in the medium-viscosity range, and is used for batches up to 2,000 liters. Bdodpfxszp Nvwo Abtjg Drive: 2,910 RPM / 11.0 kW

Condition: good (used), Used agitator tank with insulation on castors Electric heating does not work! Item number: 10784 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: +0.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 410mm Inner diameter: 700mm Outer diameter: 800mm Height of the feet: 870mm Total height: 1700mm Total width: 870mm Total length: 950mm Cylindrical height: 650mm Materials: Bdodorl Rtujpfx Abtog Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Type plate: Yes Outlet diameter: DN25 Distance drain to floor: 365mm Propeller agitator Empty weight: 184Kg

Condition: excellent (used), Used agitator tank / paste mixer With pump / conveying unit Item number: 10314 Volume: approx. 70 liters Previous application: Food processing Type: Upright in frame Material (wetted parts): Stainless steel Number of fixings: 4 Bottom: Conical bottom Bsdpfxjxdw Rle Abtsdg Top: Hinged lid with charging opening Tank dimensions: Internal diameter: 380 mm External diameter: 400 mm Leg height: 745 mm Distance from outlet to floor: 180 mm Total height: 1620 mm Total width: 650 mm Materials: Internal: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Agitator: Spiral agitator / anchor agitator with wall scrapers Features: Nameplate: No Outlet: Bottom valve Pump / conveying unit beneath the tank Agitator function tested, pump / conveying unit not tested

Condition: good (used), total height: 7,500 mm, outer diameter: 2,750 mm, 32000l Insulated stainless steel tank with a side-mount propeller agitator Diameter: 2.75 m Height: 7.5 m Slightly conical bottom It has legs Bsdpfezvwlgsx Abtjdg

Condition: used, usable tank capacity: 1,300 l, Used stainless steel mixing vessel Motor runs, but the shaft does not rotate. Last application: Chemical industry Item number: 10219 Volume: 1300L Type: Standing on 3 legs Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Bottom: Klöpper bottom Operating pressure according to nameplate: ATM Dimensions of vessel: Vessel diameter: 1140mm Cylindrical height: 1320mm Overall height: 3400mm Height of legs: 1270mm Distance from drain to bottom: 1180mm Hinged lid: 535 x 1090mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Bdodpoy Uvvqsfx Abtjg Hinged lid Top pipe, Ø 95mm Various connections on the top Agitator with dispersing disc

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Bsdpfx Absw U Sw Aetjdg Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm