Used Cuve Inox for sale (421)

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible through 2 connections for external N2 generators (optional) Installation space 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501 hours Laser 2: 503 hours Other devices: Inox 200 lifting device Weight: 102 Kg Itjdsu Ebybspfx Aanjr Max lifting capacity 135 Kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions 800x480-570x755-850 mm Drive type: alternating current Power 1.25 kw Voltage 230 V 9.2 A Protection class IP65 Frequency 50 Hz Housing: sheet steel Performance 130 m³/h Permanent negative pressure -145 mbar Short-term negative pressure -235 mbar Liquid volume 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2014, functionality: fully functional, Beer bottling line Speed: 2,000 Bph Line composed of: BORELLI monoblock Year: 2014 Direction of travel: clockwise 12-pincer rinser Nozzle type: fixed Number of treatments: water and inert gas 16-valve filler Filling type: isobaric Pre-evacuation Itsdpfev Hrcxex Aanor Degassing Single-head capper for crown cap Cap size: 26 mm TEKNINOX pasteurization tunnel Year: 2014 Pasteurization temperatures: pre-pasteurization and pasteurization managed by PLC ENOS labeler Year: 2014 Type of labels: linear with 2 stations Type of applications: Label and Back label on the same reel Collar Close SIAT cartons Year: 2014 Belt type both above and below PARMAMET clusterer Year: 2007 Format: 33x3 Accident prevention guards BELTS NOT INCLUDED Code: NP 578

Condition: good (used), Year of construction: 2007, DADAUX SLICO 700 Cutlet Slicer • Control panel protected with a cover against water ingress. • Textured loading surface prevents excessive friction of products intended for cutting. • Fully constructed from INOX 1810 • Hinged doors • 1 speed: 160 cuts/min • Adjustable cutting thickness from 0 to 40 mm • Electric feed system • Stepwise feed system • Cutting thickness adjustable during operation • Automatic pusher return • Suitable for high-pressure washing Isdpfsxx Tbpjx Aanotr • CE compliant

Condition: new, functionality: fully functional, Item: AL-10509-CSF Pump 7.5 kW CSF Inox Self-priming Pump – Type ASH 65-4-10/BM.CDPZTH1 Manufacturer: CSF Inox S.p.A. – Montecchio Emilia, Italy Model: ASH 65-4-10/BM.CDPZTH1 Year: 2017 Material: Stainless steel AISI 316L Power: 7.5 kW Speed: 1450 rpm Voltage: 400/690 V – 50 Hz Itjdpjxu N Svjfx Aansr ATEX certification: II 2G c T3 (Zone 1) Connection: 3″ sanitary fittings Condition: Very good, unused – stored in original wooden crate Description: High-quality stainless steel centrifugal pump from CSF Inox, suitable for use in hygienic and ATEX environments. The ASH-series pumps are designed for gentle and efficient transfer of liquid food products, beverages, dairy products, and chemical solutions. The low-speed 1450 rpm motor ensures smooth operation with minimal shear and foaming – ideal for milk, cream, wine, juice or CIP applications. Pump casing, impeller, and shaft are manufactured entirely from AISI 316L stainless steel, providing long service life and excellent corrosion resistance.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Laser cutting 569 working hours Last technical revision: 10.02.2023 6000W fiber laser source with cooling module Max length: 3048mm Max width: 1524mm Iodpfx Ajmzbkrsanstr Z axis: 100mm Maximum sheet weight: 750kg Maximum cutting thickness Mild steel: 25mm Stainless steel: 20mm Aluminum: 20mm Copper 8mm Comes with software: PARTS.L - production management ADDIN.SOLIDWORKS - integration between Solidworks and streamlaser STREAMLASER - CAM and Nesting VALUES.L - production cost estimate Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM The machine is like new, in working condition

Condition: good (used), tank capacity: 1,000 l, Used stainless steel tank / transport container / IBC Last application: Oil production Article number: 10889 Volume: 1,000 liters Type: Vertical, in galvanized stacking frame Material (product-contact): 1.4301 / AISI304 Manhole: 400 mm Design: Single-wall Operating pressure (nameplate): +0.20 bar Tank dimensions: Overall width: 1030 mm Overall length: 1230 mm Overall height: 1650 mm Materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel Equipment: Nameplate: yes Outlet diameter: 47 mm Itjdpfsxzq D Hjx Aanor Outlet valve: Disc valve Distance from outlet to floor: 220 mm

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: 99031, DD Motor 27.9KW; 2655 RPM Itjdpfewqrprex Aanor Automatic feeding system MAAG gear Pump; Type: EXTREX EX 28 - 4STE with control system MAAG; Type: MAAX 5 Input and Output pressure sensors (up to 350 Bar) on the gear pump Possibility to add Inox tank 2m length * 0.45m width with possibility to apply calibration system: - Equipped with vacuum pump, 8 exits vacuum collector and cooling collector with 8 exits. - Manual adjustments: right/left, up/down, forward/backwards

Condition: new, maximum load weight: 90,700 kg, overall weight: 1,26,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick Isdjw Tgp Depfx Aanstr * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Year of construction: 2004, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3420 mm Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 200 mm RAPID FEEDS X-Y-Z: 80 - 80 - 60 m/min Itjdpfjvhc Tdjx Aaner MAX CUTTING THICKNESS: STEEL 22mm; INOX 12mm; ALUMINIUM 9 mm WORKING AREA: 3070 x 1550 x 200 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: FANUC C4000 E ; 4000 W CONTROL UNIT: FANUC 160 iLB WEIGHT: 15500 Kg NOTE: DOUBLE STORAGE TOWER LKI UL300FO TWIN year 2004; SUCTION AND FILTERING UNIT TORIT; COOLING UNIT MTA 201

Condition: used, Technical details: measuring range X-axis: 3000 mm indexing: 0,1 mm weight: variable kg No. 1 Caliper/caliper gauge made of stainless and hardened steel Make INOX Itjdeu N Atwspfx Aansr Measuring range 0 - 3000mm Reading 0.05mm via vernier Leg length approx. 280mm without measuring tips for internal measurement No. 2 Caliper/caliper gauge made of stainless and hardened steel Make Massi according to TGL Measuring range 2000mm Reading 0.1mm via vernier *

Condition: used, Bleach & Fabric Softener Raw Material Intake & Production Plant 132,000 tonnes per year maximum bleach production capacity 27,000 tonnes per year maximum fabric softener production capacity Raw material reception & tank farm storage 36x Carlier and FIPP 50m3 composite vertical silos Iodpfoxr Am Isx Aanotr 150m3 sodium hypochlorite composite vertical silo Alliance Inox Industrie 49,500L stainless steel vertical silo Including pumps, pipework, instrumentation, hot water, softened water tanks and water treatment plant Product mixing facility Sirech Hostier 1,600L stainless steel premixing tank 3x Alfa Laval 11,500L stainless steel vertical mixing tanks 3x Alliance Inox Industrie 25,000L stainless steel vertical product holding tanks 6x Barriquand plate heat exchangers Pumps, pipework, manifolds & instrumentation throughout Chilled water system with CIAT chiller, chilled water tank & Barriquand plate heat exchanger Thick bleach production system including 2x composite tanks

Condition: used, Year of construction: 2003, functionality: unexamined, Equipment: documentation/manual, type plate available, Filter Photometer Lasa 100 Manufacturer: Dr. Bruno Lange Dr Lange Single-beam filter photometer – portable laboratory photometer, analysis device for various water analysis tests Photometer, round cuvettes, cuvette holder, power supply unit, mains connection with plug-in power supply (housing defective, but functional), dust cover, user manual Backlit display Cuvette test Integrated barcode reader for automatic test recognition Sensitive optoelectronic measuring device with optical filter and sensors Itjdpfx Ajxw Uq Noanjr The used device from our stock is functional and provides a result, which we cannot verify due to lack of expertise. Price / Details upon request All technical data subject to errors/typing mistakes. We sell exclusively to countries of the European Community.

Condition: excellent (used), INOX PRESSURE BOILER WITH LEVEL SENSOR AND LIFTER GRACO Ref. 236151 (OPTIONAL SENSOR AND LIFTER) - Brand: GRACO - Ref. No.: 236151 - INOX - Capacity 55 liters - For paints, lacquers, varnishes, etc. Ijdpfx Asivt Twjanjtr - OPTIONAL: SENSOR AND ELEVATOR (+1500€) - Siemens level sensor - Single column elevator. - Second hand product completely overhauled. - 1 year warranty except sensor. It is in a condition equivalent to that of a new product. - VAT not included - 2 in stock available

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) Itjdpjxf Silsfx Aansr - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: new, functionality: fully functional, Equipment: ABS, tail-lift, 🇮🇹SUPERTOP F1 6900 BRAND NEW TECNOKAR SEMI-TRAILER USE EQUIPMENT and ACCESSORIES: ADE CAT BIAN LAT. ROS POST MANUAL LOCKING AUTOSTERZ:1 WANDS FOR COMP CRAMARO REMOTE CONTROL FOR COVER OSCILLATING JOST TROLLEYS CASSET ATTR 500X400X400 INOX WHEEL TIGHTENING WRENCH MANUAL CONTROL QUICK DISCHARGE ECOLED TAILLIGHTS TARP ANCHOR HOOKS PRESSURE GAUGE REAR TOWING EYES (PAIR) ROV.BUMPER ROUND BAR AL RETRO-REFLECTIVE PANELS (X2) PARAF SING TERMOP W/MEN BOLTON SPLASH GUARD ANTINEBULIZZAT X2:1;WEDGE HOLDER WITH WEDGE ON FRAME WHEEL CARRIERS ON CASE SIDE GUARDS SAFETY PROP CAS AND TEL SCALE REGISTRAB ACC ON SPN ANT ALLOY AIR TANKS 60L+60L:1;STAB CONTROL SYSTEM HEIGHT ADJUSTMENT SYSTEM RAPID SUSPENSION RESET SYSTEM RAPID EXHAUST SYSTEM ANTI-VIBRATION RUBBER BUFFERS OSCILLATING SAF TROLLEYS EFP ECO CABLE 2X1MMQ 9M LED WORK LIGHT 1100 CON.315/80 R22.5 HTR:10;CER 9.00 R22.5 ALCOA LVL ONEC0 AT OTHER LOCATIONS IN OUR GROUP WE ARE OFFICIAL DEALER MERCEDES-BENZ D.E. TRUCK S.P.A. HEADQUARTER NAPLES (NA) DOMENICO ESPOSITO S.P.A. HEAD OFFICE EBOLI (SA) OFFICIAL DEALER FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS DOMENICO ESPOSITO S.P.A. HEAD OFFICE EBOLI (SA),NAPLES (NA) - POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING AT THE HEADQUARTERS. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS 0% DOWN PAYMENT TEL. -0823 1686306 -335 6713062 -377 7064530 Ijdety N Enopfx Aanetr OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30 A.M.-7 P.M. SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTIMARKS COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S500Stralis-MAN-NISSAN v8-Intarder- 770s-limited edition-660 S semi-trailer-semi-trailer refrigerated tank- Lamberet-schmitz ISUZU-CASSONEFISSO-GRU-TRILTABLE-TELONATO-BOX-SPONDACARICATRIC E-CELLA FRIGO- COIBENTED WITH FRIDGE -FURBANK

Condition: excellent (used), REF: MM5728 1 x Zumex Food Engineering commercial cold press juicer.  The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - MASTERY.  ✅ Serial number - 475186. ✅ Production capacity - from 30 L/h up to 110 L/H. ✅ Motor - Brushless. ✅ Deposit capacity - 3 litres. ✅ Dimensions - 940mm L x 735mm W x 1700mm H. ✅ Touch Control Display - 4.3" Colour. Itjdjt Uim Hepfx Aaner ✅ Material - INOX. ✅ Pression Power - 11,000 kg.  Notes 🗒️ Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products.  Videos available on request. 

Condition: used, This listing is for a Molecular Devices SpectraMAX 190 Absorbance Microplate Reader. The unit is in full working condition and is ready for immediate release. The Molecular Devices SpectraMAX 190 Absorbance Microplate Reader is a versatile and high-performance bio-analytical instrument designed for life science research and development. With precise measurements and a broad wavelength range, it is ideal for a variety of applications, including DNA analysis and pharmaceutical research. Key Features: Wide Wavelength Range: Operates from 190 to 850 nm, enabling measurements across UV and visible spectra for diverse applications. Tunable Monochromator: Allows wavelength selection in 1 nm increments for flexibility and precision in absorbance measurements. Narrow Wavelength Bandwidth: Features a 2 nm bandwidth for enhanced resolution and specificity. Broad Photometric Range: Measures from 0 to 4.0 OD with a high photometric resolution of 0.001 OD, ensuring accuracy for both high and low absorbance samples. PathCheck Sensor Technology: Ensures less than 5% error compared to cuvette readings, delivering reliability in microplate-based measurements. Xenon Flash Lamp Light Source: Provides stable, high-intensity light for consistent results over time. Rapid Measurements: Endpoint readings in as little as 12 seconds and kinetic measurements with a minimum 9-second interval streamline workflows. Temperature Control: Operates from ambient + 4°C to 45°C with ± 0.5°C uniformity at 37°C, ensuring well-to-well consistency for temperature-sensitive assays. Isothermal Reading Chambers: Maintains a uniform environment with less than 1°C variation when temperature regulation is not enabled. Applications: The SpectraMAX 190 is ideal for: DNA Analysis: Quantification and purity assessment. Pharmaceutical Research: Drug discovery and development assays. Itedpfx Aajxxz Tmjnjr Life Science Research: Enzyme kinetics, protein quantification, and more.

Condition: new, Year of construction: 2025, Powder baking furnace 3,500 x 1,900 x 2,000 mm 1 Inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2.000 mm 4 Substructure 1 set of steel profiles 5 Walls 1 set of double-sided galvanized sheets 1mm, outside RAL Itodpfx Aasfhv Tconjr 6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 7 Floor furnace receives 2 drive-in rails for trolleys 8 Temperature 220°C 9 Fans 1 pc. 7.500 m³/hour 10 Electric motors 1 pc. 3 kW , 1450 U/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 Hinged doors one-sided 2 pcs. insulated with rock wool 150mm 75Kg/m² Heating indirectly by thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burner 1 pc. furnace is heated electrically 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Condition: excellent (used), Used stainless steel tank / transport container / IBC Item number: 10811 Available units: 141 Last application: Food Volume: 500 liters Type: Standing on 4 castors Material (wetted parts): 1.4301 / AISI304 Manway: 830 mm Design: Single-walled Operating pressure acc. to nameplate: ATM Tank dimensions: Itedpfx Aetqd Rnoanor Total width: 1040 mm Total length: 1290 mm Total height: 1150 mm Materials: Interior: 1.4301 / AISI 304 Exterior parts: 1.4301 / AISI 304 Equipment: Nameplate: No Outlet diameter: 250 mm Outlet valve: Butterfly valve Distance from outlet to floor: 130 mm

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment list available upon request. - Gooseneck, approx. 4,100 mm in length with central beam Itsdpfx Aowvzg Reanor - Load platform with double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Twin tires 235/75 R 17.5 3PMSF - WABCO braking system, EBS-E - 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connections on the tractor unit - 4 pairs of stake pockets integrated in the outer frame of the gooseneck, suitable for insertable stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets integrated in the outer frame of the loading area, suitable for insertable stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left-hand side in direction of travel - Remote steering control from front and rear using cable remote with push buttons, with axle tracking control, without installation in the tractor unit - 2 axle load gauges mounted on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse rows of stake pockets mounted in the floor of the loading area for insertable stakes approx. 100 x 50 mm - 1 transverse row of stake pockets mounted in the floor of the gooseneck for insertable stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox, mounted under the loading area - WADER container pockets in the loading area for transporting: 2x 20' containers or 1x 40' container - Central automatic lubrication system with 2 pumps, BEKAMAX brand - Complete HRM Metalization (High Resistance Metallisation)

Condition: used, This listing is for The Agilent Cary 3500 Compact UV-Vis is a double-beam spectrophotometer The unit is in full working condition and is ready for immediate release The system performs ambient and temperature-controlled experiments with air-cooled Peltier temperature control, and it accurately analyzes low-volume samples providing in-depth analysis by collecting up to 250 data points per second. The xenon flash lamp eliminates the daily warm-up time and drastically reduces the frequency and cost of lamp replacement. Itsdpfxexxwbae Aansr The Cary 3500 Multicell UV-Vis is a double-beam spectrophotometer offering new, unique measurement capabilities that can be deployed in regulated environments. The system simultaneously measures up to four independent temperature experiments across eight cuvette positions, with air-cooled Peltier temperature control. A xenon flash lamp eliminates the daily warm-up time and drastically reduces the frequency and cost of lamp replacement. You can also accurately monitor kinetic experiments with a data collection rate of up to 250 points per second.

Condition: new, Year of construction: 2025, functionality: fully functional, temperature: 220 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Powder ovens in various sizes 1 Internal dimensions length 1500 - 6,500 [mm] 2 Internal dimensions width 1700 - 1,900 [mm] 3 Internal dimension height 2,000 [mm] 4 Substructure Steel profile 5 Walls 1 mm galvanized sheet metal on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Oven floor receives 2 entry rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C Ijdpfjfhv Tlex Aanetr 9 Fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 Electric motors 1 - 2 pcs. 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Sash or sliding doors on one or both sides 2 - 4 insulated with rock wool 150mm 75Kg/m² Indirect heating via thermoblock 13 Thermoblock stainless steel INOX AISI 316 Heating electric or gas heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection

Condition: new, maximum load weight: 48,180 kg, overall weight: 70,700 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Full equipment list available on request. GOOSENECK * Gooseneck with integrated single-axle chassis (pendle axle) in removable design * Gooseneck hydraulically height-adjustable, including hydraulic connection linked to the hydraulic axle compensation for the front axles * Length: approx. 5,200 mm, with front taper approx. 60° * Suitable for tractors: 6 x 4 or 8 x 4 * Plug-in steel front wall, approx. 400 mm high, in angled design * 1 pair of mechanical support legs at the front of the gooseneck, foldable (LC 10,000 daN) * 1 pair of plug-in aluminium side boards, approx. 400 mm high, anodized finish * 1 plug-in aluminium rear board, approx. 400 mm high, anodized finish * Checker plate covering above the gooseneck * 3.5-inch kingpin * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * 1 INOX tool box with single lid, bolted to the right side of gooseneck in the direction of travel, by the ALU sideboard, approx. 1,350 x 400 x 400 mm (L x W x H) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling * 1 LED work light each on the left and right on the rear cross member of the gooseneck, wired to the connection bar for the tractor unit LOAD DECK * Low-bed with external beams, designed as telescopic load deck in low-profile construction with front extension, including fixed approx. 50 mm hardwood floor, length x width approx. 8,000 mm x 2,740 mm * One locking point approx. every 1,000 mm on the extension * Fixed drive-on ramps at the front of the loading platform with climbing strips * 1 lashing ring on the outside of the fixed drive-on ramp (LC 10,000 daN) * 1 lashing ring suspended on the outside on each left and right at the front cross member (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the inside beams of the low-bed * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the outside beams of the low-bed (LC 10,000 daN) * Recesses above lashing rings in the upper flange of the outside beams Itsdpfxjwx Ddwo Aanjr * Mechanical pin-lug coupling from the low-bed to the chassis to change the load deck or install extension beams, with electro-pneumatic-hydraulic couplings * The outside beams of the low-bed with a painted-on sand layer for anti-slip protection * 4 pairs of recessed lashing rings lying in the load deck, distributed along the outer frame/outside beam (LC 10,000 daN) * 1 lashing ring outside each on the left and right on the rear cross member (LC 10,000 daN) * Fold-out deck wideners, approx. 230 mm per side * Loose widening planks, steel-edged * 6 pairs of threaded blocks between the lashing rings under the upper flange on the outside beam, for mounting bolted rings M24 (LC 8,000 daN) * 2 pairs of M24 bolted rings (LC 8,000 daN) included REAR CHASSIS * Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear PENDLE AXLE * All axles hydro-mechanically forced steering * Burst hose valve on the axle compensation cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-fittings to secure in raised position * Final painting of axles with 2 layers of 2-component paint, solid color in DB 7350 Novagrau * Hydraulic axle compensation * Tires 245/70 R 17.5 3PMSF * Suspension bar

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick Iodpfexgk U Njx Aanjtr * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 38,080 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specifications available upon request. Loading Platform: * Extending loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden floor framed in omega profiles * 7 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Equipped with disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres: 385/65 R 22.5 Braking System: * Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor Warning Signs: * Mountings on the gooseneck and rear panel left and right for warning signs, including socket Isdpfx Aaexf Sifenjtr Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made of high-strength fine-grained steels * Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection for the standard grit-blasted welded frame, guaranteed by a two-component zinc dust primer * High-quality, single-colour two-component topcoat in RAL 3002 carmine red * Rims in silver, add-on parts as per manufacturer's choice * Rear section metallized and painted in RAL 9010 pure white Included Accessories: * 2-inch kingpin * 4 wheel chocks with brackets on the front wall * Remote steering, front and rear, cable-operated by push buttons, with single-track control of the axles (without installation in the tractor) * Manual and description on USB stick * Electro-hydraulic unit * Galvanized connection strip at front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension and rear of the trailer * European reflective panels (red-yellow) on the rear of the trailer * One mud flap at the rear of the trailer * Mounting for rotating beacon at the rear of the trailer * 10 pairs of pocket sockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the platform on the right-hand side * Speed stickers 80 km/h on the rear and on both sides * Load manometer for determining axle loads including load chart * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the platform for: 1 x 20' container, 2 x 20' container or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stanchion strip pockets for plug-in stanchions approx. 100 x 50 mm * Storage for plug-in stanchions on the inside of the front wall * Access ladder installed on both left and right side in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left in the direction of travel * One add