Used Uv Coater for sale (4,458)

Condition: excellent (used), Roller PAINTING and FINISHING LINE (UV), max. working width mm 1300. Composed by: 01) cod. J05012) Sanding Machine "COSTA LEVIGATRICI" Mod. SN TR LFT 3 TT 1350 Hnedpfx Ajhyty Asdwsg 02) code Y11034) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 03) cod. Y11036) UV oven (1 lamp) "CEFLA" Mod. UV 2000 M1 - TT 2000 04) code Y11037) Roller Coater"SORBINI by CEFLA" Mod. SMARTCOATER M-1 AN 05) cod. Y11041) UV oven (2 lamps) "CEFLA" Mod. UV-R M20 06) code Y11061) Sanding Machine "COSTA LEVIGATRICI" Mod. SH3 TR TTTTR 1350 07) code Y11042) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 08) code Y11039) UV oven (2 lamps) "CEFLA" Mod. UV-R M2 09) code Y11035) Roller Coater "BURKLE" Mod. RCL-M 1300 (e.a.s.y. Coater) 10) code Y11043) UV oven (3 lamps) "CEFLA" Mod. UV-R M3

Condition: used, Year of construction: 2006, operating hours: 1,00,000 h, functionality: fully functional, feed rate X-axis: 30 m/min, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 48,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 68,000 mm, total width: 2,600 mm, working height: 75 mm, power: 720 kW (978.93 HP), input frequency: 50 Hz, input current: 1,800 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, compressed air connection: 6 bar, complete lacquering line: Hsdpfev Ta Tfex Adwjng 2x Heesemann sanders (LSM8 2006.12.141, 3rollers-3pads/ LSM8 2006112.151, 2pads) 2x Heesemann cleaning mach. (EA8 2006.12.142 / EA8 2006.12.152) 1x Cefla hot air drying tunnel (FEV EU2/8 6 IRM / TNSL) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRU+TN 4000/HT / 4lamps UV 2000 M2+CRU+TN 5000/HT / 2lamps / 4 lamps) 2x stain roller coaters ( Smartcoater M-EVO / model M) 2x heavy putty roller coaters (Smartcoater SP / SP1-EVO) 3x lacuer roller coaters (Smartcoater MF) 10x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: efficient: - Turbo system: 25% higher system performance thanks to state-of-the-art application technology, all with the same space requirements! - Reduced throughput times due to optimized program automation for fast UV systems - Up to 70% cost savings compared to casting and spraying, thanks to the use of solvent-free systems and single-operator control flexible: - Cost-effective single-operator operation with return function or, alternatively, continuous operation for two-person operation - Expandable: The system can be upgraded with additional roller, smoothing, or sanding units ergonomic: - Simple operation thanks to ergonomic controls service-friendly: - Cleaning cycle and quick-change system process-safe: - Top-quality surfaces, precisely reproducible Included: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying tunnel, 1 lamp 60/80/120 W Working height: 850 - 950 mm Application roller, rubberized: D=238 mm Dosing roller, chrome-plated: D=174 mm Hodswka Hlopfx Adweng Passage height: 3–120 mm UV lamp module: 80/120 W mercury Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2010, operating hours: 1,00,000 h, functionality: fully functional, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 50,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 65,000 mm, total width: 2,700 mm, power: 365 kW (496.26 HP), input frequency: 50 Hz, input current: 930 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, complete lacquering line: 2x Costa K7 sanders (2010, 1st- 2x roller / 2x pads, 2nd- 2x brushing, 1x pad ) 1x Heesemann sander (LSM8 2006.12.161) Hedev Tbgyopfx Adwsng 2x Wikoma hot air drying tunnel (2002) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRIM+TN 3500/HT / 2lamps UV 2000 M2+CRIM+TN 3500/HT / 1lamp UV 2000 M1+CRIM+TN 3000/HT / 3lamps UV 2000 M3+CRIM+TN 4000/HT) 2x stain roller coaters ( Smartcoater M) 2x heavy putty roller coaters (Smartcoater SP1) 3x lacuer roller coaters (Smartcoater MF) 8x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: excellent (used), For sale: professional MAGNAFLUX UVM3059 UV-A radiation intensity meter – used for NDT inspections (non-destructive testing, penetrant testing, fluorescent inspection, etc.). The device is in very good technical and visual condition, ready for immediate use. • Model: UVM3059 • Manufacturer: MAGNAFLUX GmbH • Power supply: 9 V • Measurement range: 0.5 – 99.9 W/m² • Serial number: 381 • Calibration date: 14/08/2023 • Next inspection due: 2024 • Set includes: original transport case, foam protection, sensor, documentation on the housing The device is fully functional, the display works correctly, and the sensor responds properly to UV-A radiation. Ready for use in laboratory, workshop, production, or quality control. Hnedpjxlub Defx Adweg

Condition: used, UV dryer Comes from ongoing production Hsdpov Sauasfx Adwjng

Condition: used, Manufacturer: Hanovia UV Model: PMS150G4/4 Type : Ultraviolet disinfection system Application: Ultraviolet (UV) water/liquid treatment Hodpsx R A Ilsfx Adwong Pressure rating: 7 bar Maximum pressure loss: 0.15 bar Maximum flow rate: 133 L / min - 8 m3/hour Temperature: 80°C

Condition: excellent (used), Year of construction: 2014, color channels: 9, Vutek GS 5000R Year: late 2013 (in production from 2014) Very low usage Only 30,000 m² per year (no mesh) 8 colors + White (ideal for backlit applications) Fully equipped Print width: 3 x 1.6 m – 3.2 m – 5 m * 3–6 month warranty possible Delivery: we can Installation: we can Training: we can Service: we can Parts: we can Hjdpfx Aswy Um Ejdwjng

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Hnjdpjq T N T Tofx Adwsg Compose IQ software. Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid Hodpfx Aexl Dbtjdwjng • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: refurbished (used), Year of construction: 2017, EFI Vutek H2000 Pro UV Hybrid Printer Print width flatbed/roll: 205 cm Color: 6C+ White (over and under print) Resolution: 1000 dpi, 7 pl drop size Ultradrop Speed up to 1000 m2/h Roll option Fully refurbished Hnedpfxjxpwx To Adweg

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, number of ink cartridges: 8, color channels: 8, number of print heads: 40, resolution (max.): 1,200 dpi, Vutek H5 LED Hybrid Printer Year: End of 2019 – installed in 2020 Colors: 8 C + White (CMYK LcLm White (White/Varnish)) Print width: 3.2 m Speed: up to 457 m²/h Hnedpfxoxu E Nke Adweg Resolution: 7pl Ricoh Gen5 – 1200 dpi Roll option: 3.2 m Printer is fully refurbished Options: efi Fiery RIP server Vutek H5 automatic feeder

Year of construction: 2005, condition: good (used), KomoriMatic SAPC KMS Hjdpfx Adeirmuwewong

Condition: used, Year of construction: 2002, functionality: fully functional, Year of manufacture: 2002 Format: 73×102 Delivery: immediately Price: on request Description: Fully operational, in production, 79 million impressions, 5 colors + coating, UV IST. Hnjdpfxex Nw Hao Adwjg

Condition: excellent (used), Provisur Coater TST Coating machine Hedpfx Aex Ak Rvsdwjng Stainless, high volume throughput waterfall coating machine, maximises coverage to the right thickness while reducing excess waste, stainless mesh belt 1700mm x 600mm, recirculation pump, variable speed conveyor, adjustable flow, 3Ph Three in stock

Condition: ready for operation (used), Year of construction: 2004, SPS CP2 SpotUV 72cm*102cm + UV SPS ClassicJet M2 (2H/1C UVi) / 2 x heating stations UV cooler Hnjdpfswmmhzjx Adweg ST2 stacker delivery Also included are extra brand-new lamps, extra strap and about 80 metal frames. Max paper size : 720 x 1020 mm Min paper size : 320 x 450 mm Screen size : 1140 x 1280 mm Speed : 3300/h Dimensions : 4090 x 2350 x 1580 mm Weight : 4200 kg Air : 6 bars Power supply : 3 x 400V N PE 50/60 Hz – 13.5 Kw

Condition: used, Year of construction: 2003, Offset 6 color with coating Roland 706/3B+LTTLV (UV) Year: 2003 Number of impressions (mio): 500 Machine control - RCI - IntelliTrax II density control Feeder - Non-Stop feeder - Logistic system in feeder Printing units - Number of printing unit(s): 6 - Straight machine - APL Full Automatic Plate Change - Automatic blanket washing device - Cooling system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 2 - Number of transfer unit(s): 2 Hjdpfx Ajuhtg Ajdweng - Tresu chambered ductor blade system - Number of Anilox roller(s): 2 Drying - IR dryer between coating unit 1 and 2 - IR + hot-air dryer in delivery - UV dryer in delivery: Eltosch Delivery - Non-Stop delivery - Powder spray: Grafix Cantronic 3000 - Logistic system in delivery Elevation - Machine raised by (cm): 50 Accessories - Air cabinet: Becker - Cabinets air cooled - Compressed air compressor, excluded

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Hnsdpfx Adohlp Efewjg

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor Hodpfjvupdcex Adweng - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, laser power: 20 W, UV Laser Engraving Machine with 20 Watt Laser Power Laser source with 355nm wavelength / 20 watts Demo machine, with minimal operating hours (approx. 15 hours). - Includes Windows 64-bit PC system - Includes 22" monitor - Fully installed and calibrated - Engraving software in German - 3D software (MM3D) - Very easy to operate - Switch on and start immediately - 20 watt UV laser source for high-contrast, rapid marking with extremely high resolution - Engraves virtually all metals (stainless steel, brass, aluminum etc.) - Engraves virtually all plastics (including PVC, silicone, etc.) - Engraves real glass (including crystal glass) - Cutting of real glass possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600 mm (L x W x H) - Mounting table with threaded holes in 50 mm pitch - LED work area illumination - 50 mm duct connection for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (switchable) - 3D scanner for marking surfaces of any shape - Includes foot switch to start engraving process Hsdpfx Adoflrnaoweng Sale to commercial customers only. Delivery / consultation / sales only in Germany / Austria / Switzerland Leasing or hire-purchase available through our financing partner Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, controller model: 21i MB, table width: 625 mm, table length: 825 mm, overall weight: 9,000 kg, Travelling Bridge CNC Vertical Machining Centre Hsdox Tud Ropfx Adweng Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2016, EFI Vutek GS2000Lx Pro - Ultradrop Colour configuration: 4 colours + white Hnodpfxsx Tuyfo Adwsg Manuf. Year: 2016 Mileage: 150.00m² RIP: NA In production Availability: January 2026 Demo possible Transport and installation in Europe available upon request The EFI VUTEk GS2000LX Pro with UltraDrop Technology is a hybrid flatbed/roll-fed superwide inkjet printer featuring native 7 pL print heads for high-definition quality, LED curing technology, and a maximum print speed of up to 2,000 ft²/hr. It supports both rigid and flexible media up to 80 inches (2 m) wide. Key Specifications Print Technology LED UV-curing, grayscale 7 pL UltraDrop Technology print heads Max. Print Resolution True 600 or 1000 dpi (selectable) Max. Print Speed Up to 2,000 ft²/hr (186 m²/hr) in Fast-4 mode Color Capability 8 colors plus white ink printing (optional clear varnish channel) Max. Media Width 80 in. (2 m) Max. Media Thickness 2 in. (5.08 cm) Media Types Flexible and rigid substrates Ink Type Genuine EFI UV Inks supplied in 5.0-liter containers Automation Single-pass, multilayer print capability; continuous print with less than five seconds between boards Dimensions (WxHxD) 202" x 66" x 63" (without tables) Machine Weight 5,050 lbs. (2,291 kg) Features and Benefits UltraDrop Technology: Offers smaller drop sizes (native 7 pL) and more precise control with true multidrop addressability for outstanding smoothness in shadows, gradients, and transitions, as well as superb four-point text quality. LED Curing: "Cool cure" LED technology extends the range of supported substrates (including heat-sensitive media), increases uptime with instant on/off lamps, and drives down operating costs and energy consumption. Workflow Integration: Optimized for use with the EFI Fiery proServer with Fiery XF production DFE and color management workflow, allowing seamless integration with EFI Web-to-Print and MIS/ERP solutions. Environmental Benefits: The LED system provides a greener printing solution with lower power consumption, fewer consumable parts, less waste, and low VOCs compared to conventional mercury arc lamps.

Condition: used, UV-9 Oven 11 units available, year of manufacture 2022 and 2023. Configuration: 6726613 UV-9 Oven, 7262431 UV-9 Base model 7263582 Option, closed loop top 7262797 Inlet and outlet shutter option 7263074 Traffic control (board drop detection) Hedpsx Tg Hwofx Adwjng 7263583 Board counter 7263584 Board jam detection (entry and exit) 7264524 Automatic width adjustment for conveyors Price from €19,000

Condition: ready for operation (used), machine/vehicle number: 95 202 74, This listing includes a fully operational, complete DELO DELOLUX UV curing system, consisting of: DELOLUX pilot A4T control & power supply unit 2× DELOLUX 20/400 A2 LED area lamps (400 nm) Mounting brackets, integrated cooling, and all original high-quality cabling DELO is one of the world’s leading manufacturers of industrial UV curing systems used in electronics, optics, medical device assembly, precision bonding, and automated production lines. This system provides extremely high-intensity, uniform UV illumination over a large area, perfect for high-speed adhesive curing and automated processes requiring absolute stability and repeatability.  Included Components 1) DELOLUX pilot A4T Control & Power Unit Model: A4T Input Voltage: 100–240 V AC, 50/60 Hz Power Consumption: 1.45 kW Fuse: T16 A / 250 V User Interface: Large touchscreen display (Login, Admin/User profiles) Control Ports: PLC 1–4 (digital control inputs) Function: Central control, monitoring, and power delivery for LED heads 2) Two LED Heads – DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination Area: 112 × 112 mm Perfect uniformity for industrial curing processes Both heads include mounting brackets + 280 cm cable each Technical Specifications UV LED Heads (each): Model: DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination area: 112 mm × 112 mm Serial Numbers: included on the labels Cable length: 280 cm Control Unit (A4T): Model: DELOLUX pilot A4T Input: 100–240 V AC Hedpfx Ajx Emqgjdwsng Power: 1.45 kW Fuse: T16A Port outputs: Up to 4 LED heads Power cable length: 180 cm Condition Fully working, tested with both LED heads Bright output, even intensity Cosmetically excellent No damage to connectors, filters, or LED arrays Perfect for: Industrial adhesive curing, electronics production, display manufacturing, PCB assembly, medical device fabrication, optical bonding, and automated UV curing stations. Cable Lengths (included): Power cable (A4T): 180 cm LED head cables: 280 cm each Thank you for considering our surplus machining and electrical items for purchase. These items have been in our company's stock for several years, but they are in functional condition. Due to the length of time they've been in storage, some of the items may show signs of aging or wear on the packaging, but the contents are in excellent condition. We want to be transparent about the condition of these items, so please note that the packaging may be slightly damaged, discolored, or have markings from storage. However, this does not affect the functionality of the items inside. We have inspected all of the items and can confirm that they are in functional condition. We will take great care in packaging and shipping your order to ensure that it arrives in the same condition as it was when it left our facility. If you have any questions about these items, please don't hesitate to contact us. Thank you for your interest!

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The pictures show the machine in its unrefurbished condition. The offer price refers to a partially refurbished, fully functional machine. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Part height: approx. 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104 A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed rate adjustable: approx. 1.25 - 21.25 m/min - Length: approx. 3,500 mm - Width: approx. 2,700 mm - Height: approx. 1,600 mm - Location: in stock - Voltage, Hz: 400 / 50 Hsdex Tpx Aopfx Adwjng