Used Cyclone Separator for sale (6,983)

Condition: used, Year of construction: 2011, Horizontal machining center Burkhardt + Weber Type/Model: MCX 900 Condition: Used Year of manufacture: 2011 Operating hours: 27,289 h Control system: Siemens 840D Technical data Working area and workpiece capacity Travel ranges X / Y / Z: 1,650 mm / 1,600 mm / 1,500 mm Interference circle: 1,850 mm across the entire X travel range Pallet size: 1,000 x 800 mm Max. pallet load: 3,000 kg Tilting moment for pallet machining up to 40,000 Nm Pallet design: T-slots Main spindle Tool holder: SK 50 Gear unit: 2-stage Spindle speed up to 8,000 rpm Spindle power: 37 kW (S1) Spindle torque: 1,220 Nm (S1) Tool management Magazine with over 200 tool positions Max. tool weight: 40 kg Tool tilting moment up to 120 Nm Tool taper cleaning Tool loading via the spindle Tool planning system on the spindle Mechanical drill break detection up to 750 mm Coolant system Coolant tank volume: 2,500 liters Paper band filter High-pressure coolant system: 70 bar Adjustable coolant pressure Cooling unit Flushing of pallet support Workpiece flushing Coolant spray gun Automation and hydraulics Linked to a robot cell Year of manufacture of the robot cell: 2013 Fixture hydraulics Hydraulic connection on the pallet changer Hydraulic connection in the working area Hydraulic connection to the pallets Hydraulic extension for clamping pressures over 60 bar Rjdpfx Aij Afpnisroch Equipment: Process monitor iCut Collision monitoring system Brankamp CMS UPS 4-way light stack Quoted item: Shipping costs will be provided in a separate offer.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 10 h, laser power: 24,000 W, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, Standard Equipment Machine - Work area: 4000 x 2000 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for highly precise machining - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLC) - Machine status indicator - Machine for ambient temperatures up to 45 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting Head - Universal cutting head with fully adaptive lens system - Protective glass - Online condition monitoring of the protective glass - Dynamic Focus Control - Automatic nozzle centering Control System - Fast re-production - SINUMERIK control system - Ergonomic control panel with 21.5″ wide- screen multi-touch color display - Integrated technology data - Automatic shutdown - Programmable gas selection for pressure/cutting - Microweld - Remote support interface - Production plan - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - BrightLine fiber - Smart Nozzle Automation - DetectLine - Drop&Cut - Integrated camera 1 for process monitoring - ControlLine - FlyLine - PierceLine - PlasmaLine - High-speed cutting package - High-speed cutting package Eco - Copper cutting package - Brass cutting package Data Transfer - USB interface - RJ-45 network interface - Online Update Manager Safety - CE marking and EC Machine Directive - Light barriers - Multi-chamber extraction system - Electric roll-up roof - Machine enclosure with certified viewing window door on the right and left Extended Standard Equipment Rsdpfx Ao Afxu Sjirjch - Compact dust collector - Support strips made of structural steel - Automatic pallet changer in longitudinal direction (standard/heavy-duty) - Nanojoints - Smart Rerun Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 24001 with BrightLine fiber - Separate laser power supply Additional Cutting Packages - High-speed cutting package Eco - Sheet thickness extension cutting package Extended Machine Equipment - Machine for ambient temperatures up to 45 °C - Prefilter for gases N2 + O2

Condition: used, Year of construction: 2011, operating hours: 69,103 h, functionality: fully functional, machine/vehicle number: NT430111102, travel distance X-axis: 750 mm, travel distance Z-axis: 1,635 mm, overall weight: 26,500 kg, For sale is a CNC turning and milling center from the renowned manufacturer Mori Seiki, type NT4300DCG/15000S, manufactured in 2011. The machine features a dual spindle, a milling spindle, and extensive technical equipment, making it suitable for demanding turning and milling operations. Technical specifications: Manufacturer: Mori Seiki Type: NT4300DCG/15000S Year of manufacture: 2011 Serial number: NT430111102 Machine number: 1216 Travel distances X/Z: 750 / 1,635 mm Max. turning diameter: 750 mm Rodpfxo Afx Als Airech Electrical connection power: 69 kVA Machine weight: approx. 26,500 kg Control system: Type F31IA5 Equipment and accessories: Dual spindle Milling spindle 10-position tool turret, partially with driven tools Three- and four-jaw chucks Internal tool measuring system Renishaw HPRA Chip conveyor, manufacturer Enomoto Coolant filtration system with band filter, manufacturer Knoll, type FKA500, year of manufacture 2012 Separate cooling unit, type CLPB, serial number 159145 Siemens control system, type Simatic Two workbenches with 10 and 12 drawers respectively Partition and lighting system Extensive accessories with digital and analog measuring instruments, hand tools, and machine accessories Sales offer: A powerful CNC machining solution with extensive equipment for industrial production. The machine is offered including the described accessories. Attractive offer – flexible & hassle-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Feel free to contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: good (used), Technical data for the pallet racking beam: Racking system: Stow Type: Pal Rack NS Included in the scope of delivery: 01x Pallet racking beam, used Material color: RAL 2004 orange Box profile: 100 x 50 mm Beam type: PNB 0480 Agraffe: 4 HK (hooks) Clear width: approx. 2,700 mm Max. load per beam pair: 1,500 kg with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out Rodj Agvu Aepfx Airoch Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2007, functionality: fully functional, Window and door component production line Manufacturer: WEINIG, Type: UC-Matic Year of manufacture: 2007 Line consisting of: Pos. 1: Infeed Unirex 2000 Transverse + longitudinal conveying system PHV R For the indirect feeding of both identical and different workpiece lengths. System consisting of a transverse conveyor and a roller conveyor - Transverse conveyor, 6 lanes - Loading area for manual filling. - Automatic buffer zone - Automatic part separation using a clamping and reversing device - Transfer to a roller conveyor - Roller conveyor, powered - Pneumatically height-adjustable Adjustment travel, max.: 25 mm Transport length: 2300 mm Roller width: 160 mm Roller diameter: 50 mm Roller spacing, graduated: 120-825 mm Transport speed, fixed: 20 m/min. Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz Pos. 2: Conveyor belts Conveyor belt, powered (TB 250) With center guide Transport length: 1000 mm Belt width: 250 mm Working height, adjustable: 820-1050 mm Guide stop, right: 70 mm Belt speed, fixed: approx. 20 m/min. Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz Pos. 3: Machining center Weinig Unirex 2000 Pos. 4: Transport between machines with double part formation Longitudinal + transverse conveying system LKF 1 For the transport and stacking of both identical and different workpiece lengths at the end of the line. Workpiece reference line: roller conveyor – infeed side System consisting of a roller conveyor and a transverse conveyor - Roller conveyor, powered - Transport length: 2300 mm - Transverse conveyor, 7 lanes, height-adjustable Turning device WVU in the transverse conveyor, including options For changing the end face of workpieces. Rotational movement motorized 180° around the vertical axis. Pneumatic height adjustment of the turning device up to the max. wood height (100 mm) 4 x Additional automatic buffer zone (max. 8 zones) Pos. 5: Conveyor belts Conveyor belt, powered (TB 250) Without center guide and glass strip guide plate Pos. 6: Transverse machining Weinig Unitec 15 1. Tenon and groove spindle 2. Tenon and groove spindle Pos. 7: Conveyor belts Conveyor belt, powered (TB 250) Without center guide and glass strip guide plate Transport length: 1000 mm Belt width: 250 mm Working height, adjustable: 820-1050 mm Guide stop, right: 70 mm Belt speed, fixed: approx. 20 m/min. Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz Rcsdpfx Aio Agvhpersh Pos. 8: Longitudinal machining Weinig Univar 12 1. Profiling spindle 2. Profiling spindle Profiling cutter head, horizontal, top 3. Profiling spindle Profiling cutter head, vertical, right Profiling cutter head, vertical, top (in the auxiliary stand) Profiling cutter head, horizontal, bottom (in the auxiliary stand) Pos. 9: Turning system with clamping device Pos. 10: Outfeed of the line Longitudinal + transverse conveying system LKF 1 For the transport and stacking of both identical and different workpiece lengths at the end of the line. Workpiece reference line: roller conveyor - infeed side System consisting of a roller conveyor and a transverse conveyor - Roller conveyor, powered - Transport length: 2300 mm - Roller width: 230 mm - Roller diameter: 50 mm - Roller spacing, graduated: 120 - 825 mm - Transport speed, fixed: 20 m/min. - Motor: 0.2 KW (0.3 HP) 380 V / 50 Hz - Stop height: 30 mm - Transverse conveyor, 7 lanes, height-adjustable - Adjustment travel: 25 mm - Conveying and stacking length: 3000 mm - Support width: 2000 mm - Working height, adjustable: 820-1050 mm - Conveying speed, fixed: 10 m/min. - Moto

Year of construction: 1994, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 407, number of axes: 3, This MIKRON BTM 2000 surface grinding machine was manufactured in 1994. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 1,000 mm. The machine has a maximum table load of 3,500 kg and a spindle speed of up to 4,000 rpm. If you are looking to get high-quality surface grinding capabilities, consider the MIKRON BTM 2000 machine we have for sale. Contact us for further details. Rjdpfx Aj Agvq Hsirech - Not fully functional; error message "Grober Positionierfehler" (Gross positioning error);- Electronic Handwheel: Heidenhain HR 330 - Maximum Table Load: 3,500 kg - Rapid Traverse (X/Y/Z): 15 m/min each - Milling Head: Manual universal milling head - Spindle Speed: Up to 4,000 rpm (min⁻¹) - Tool Taper / Holder: ISO 40 according to DIN 2080 - Linear Measuring System: Direct Heidenhain LS 106 C linear scales in X, Y, and Z - Drive Technology: Siemens SIMODRIVE 611 - Working Area Enclosure: Sliding doors and strip curtain / lamellar splash guard - Cooling / Auxiliary: Separate cooling unit / aggregate - Maintenance History: Y/Z-slides overhauled by a specialized company approx. six years ago

Condition: used, mileage: 2,87,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Rcjdpfxo Agw Rle Aireh Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Condition: new, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Heavy-duty steel construction – durable and resistant to demanding workshop conditions Construction and Technology The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications Rcjdpfxsvuggbs Airsh The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Power Supply 400 V Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg

Condition: new, Year of construction: 2026, FAN 7.5 Material Handling Fan – High-Capacity Industrial Dust and Chip Extraction by CORMAK The CORMAK FAN 7.5 is a high-performance industrial material handling fan designed for efficient extraction and pneumatic transport of wood chips, sawdust, dust, and other dry bulk materials. Equipped with a powerful 7.5 kW motor and delivering an airflow of up to 10,562 m³/h, it is an ideal solution for large woodworking shops, furniture manufacturers, agricultural facilities, and industrial production plants requiring reliable dust extraction. Key Advantages Airflow up to 10,562 m³/h – suitable for servicing multiple woodworking machines simultaneously High-pressure centrifugal impeller – generates suction pressure up to 2554 Pa Powerful 7.5 kW motor – designed for continuous industrial operation Versatile application – transports sawdust, wood chips, dust, and other dry particulate materials Heavy-duty steel construction – built for demanding industrial environments Construction and Technology The FAN 7.5 centrifugal fan features a robust steel housing designed for long-term industrial use. The dynamically balanced steel impeller ensures smooth operation with minimal vibration, even under continuous load. Its stationary design allows seamless integration into custom dust extraction and pneumatic conveying systems, making it suitable for a wide variety of industrial installations. Performance and Efficiency The CORMAK FAN 7.5 maintains strong and consistent airflow, ensuring efficient removal of sawdust, chips, and airborne dust without clogging extraction ducts. Its high static pressure enables reliable transport of heavier wood waste particles, improving workplace cleanliness, protecting machinery, and enhancing overall production efficiency. Applications The FAN 7.5 is suitable for: Woodworking shops and furniture manufacturing plants CNC machining centers, panel saws, spindle moulders, and planers Agricultural facilities handling grain, feed, and biomass dust Metalworking and industrial production plants requiring dry material extraction Centralized dust collection and pneumatic conveying systems Standard Equipment 7.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller 340 mm inlet connection 350 mm outlet connection Industrial steel housing for stationary installation Optional Equipment Flexible extraction hoses and quick-connect fittings Cyclone separators Final-stage filtration systems Automatic machine start/stop control modules Technical Specifications Parameter Value Maximum Airflow 10,562 m³/h Inlet Diameter 340 mm Rcodpfx Aijvugrdoroh Outlet Diameter 350 mm Static Pressure 2554–1673 Pa Motor Power 7.5 kW Power Supply 400 V Dimensions (L × W × H) 810 × 900 × 980 mm Weight 125 kg

Condition: new, Year of construction: 2026, KDP350 Cabinet Sandblasting Machine The KDP350 cabinet sandblasting machine is an efficient device designed for cleaning and surface treatment of metal components. It is dedicated to professional workshops, industrial plants, and refurbishment service centers. The 330-liter working chamber and two side doors with perimeter sealing provide convenient access to the working area and ensure dust-free operation. The machine is supplied with a DC15 cyclone dust extraction system, which effectively removes dust generated during the blasting process. The KDP350 is an ideal solution as a wheel sandblaster and for cleaning metal components requiring precise abrasive treatment. Main Advantages of the KDP350 Sandblaster Large working chamber – 330 liters of capacity allows processing larger components. Two side doors – located on the left and right side, making loading and handling of workpieces easier. Dust-free operation – thanks to sealing gaskets and dust extraction ports with diameters of Ø63 mm and Ø90 mm. Sandblasting gun with ceramic nozzles – 4 interchangeable tips (4, 5, 6, and 7 mm) provide precise blasting performance. Working area lighting – improves visibility and accuracy during operation. Protective gloves integrated into the cabinet – wear-resistant gloves protect the operator’s hands. Compatibility with various abrasives – including quartz sand, glass beads, silicon abrasive, emery, and plastic granulate. Precision, Efficiency, and Versatile Applications The KDP350 cabinet sandblaster is suitable for removing rust, paint, scale, and technological deposits from metal, steel, and aluminium surfaces. It is an excellent solution for sandblasting: aluminium and steel wheels, engine blocks, Rcodpfx Aow H N R Sjirsh hinges, machine housings, and other components requiring precise abrasive surface treatment. Adjustable operating parameters, including pressure from 4–8 bar and air consumption of 400–700 l/min, allow the machine to be adapted to different materials and abrasive types. Dust Extraction System – DC15 Cyclone Extractor The KDP350 is supplied with a high-performance DC15 cyclone dust extraction system, which efficiently separates dust and fine particles generated during surface treatment. The integrated filter and flexible connecting hose provide comfortable and safe operation, maintaining cleanliness inside the cabinet and in the surrounding workspace. Thanks to cyclone filtration technology, filter service life is extended and the need for frequent replacement is reduced. Standard Equipment DC15 cyclone dust extractor with filter and hose 12 V fluorescent lamp (230 V power supply with switch) 2 integrated rubber protective gloves Sandblasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) 4 protective films for the viewing window 2 dust extraction ports: Ø63 mm and Ø90 mm 2 side doors with perimeter sealing gaskets User manual in Polish Technical Specifications – KDP350 Sandblasting Cabinet Parameter Specification Working volume 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick coupling Viewing window area 580 × 270 mm Doors 2 pcs. (left and right side) Dust extraction connection Ø63 mm and Ø90 mm Internal dimensions 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg Note: The machine is supplied in parts and requires self-assembly according to the included instructions.

Condition: like new (used), The system is a complete surf finisher system including suction station + undersize screening station + complete water treatment + water tank from Rösler. If required, including robot + handling portal. The components are transferred by robot to a portal with holders and immersed in the rotating surf container. The deburring performance is 20 seconds. Immersion time corresponds to about the same performance as 10-15 minutes. in a conventional vibratory finishing machine. Rotating work tank RMSF 4/800 1 piece round plastic container Rodpfx Aieyngitorjch - Working tank diameter: 850 mm Working tank depth: 500 mm 1 pc. quick coupling for easy changing of the working container 1 pc. drive motor, power 7.5 kW 1 pc. dosing device D1-K/320 SF (circulating water) on stand 1 pc. stand for enemas in the working container 1 piece flow monitoring (by means of flow monitor) Undersize screening: 1 pc. Grinding wheel return system 1 piece underframe as a stable welded construction 1 pc. balancer for weight compensation (sanding pad + hose + nozzle) including mounting frame - Suspension for hose on the base 1 pc. vacuum generator for generating a negative pressure - Connection of the line system to the transfer device of the vibratory finishing system - Suction hose with nozzle, length approx. 5 m 1 piece collection container 500 liters as a cyclone separator - for receiving the process media that are sucked out of the working container, - for delivering the process media to the screening machine - incl. automatically operated gate valve and hose for returning the process media to the screening machine 1 pc. spray nozzles for rinsing out the collection container 1 pc. 2-hand control for flap 1 pc. dosing device DZ1-K Rösler screening machine R 12/6 SM-E - for undersize screening - Total length: 1,400 mm - Overall width: 1,160 mm - Screen area: 1,200 x 600 mm - Delivery height: 1,065 mm - Step in the separation zone: 1 x 40 mm - Drive power of vibration motors 2 x 0.525 kW - Vibration motors arranged laterally - Engine speed: 1500 rpm - Operating voltage: 400 V, 50 Hz, 3 Ph N/PE Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge consisting of: Centrifuge Z 1000 * Aluminum alloy centrifuge rotor * Speed: 2,050 rpm * Reduced stripping speed via frequency converter * automatically retractable paring knife * Amount of sludge per peeling cycle: up to 25 kg * automatic residual water drainage * Long bearing service life due to special bearings that can be relubricated * electronic vibration monitoring * automatic rotor flushing Accesories 1 piece mud truck RSKM 30 1 pc. Combined waste water and circulation tank 700/700 liters 1 pc. flocculant dosing pump DP2 1 pc. Automatic post-dosing DZ-4/320 2 suction lances (vacancy monitoring) 1 pc. sound insulation package approx. 80 dB(A) 1 piece cooling unit RK 3 1 piece titration measuring kit for manual compound measurement

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. Rsdpfov Hbdrjx Airsch PROCESSED MATERIALS • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, CORMAK FAN4000 Material Handling Fan – High-Performance Industrial Dust and Chip Extraction The CORMAK FAN4000 is a professional material handling fan designed for industrial dust extraction systems used to transport wood chips, sawdust, and dry particulate waste. Equipped with a high-performance centrifugal impeller and a powerful 4.0 kW motor, the unit delivers an impressive 6,500 m³/h airflow, making it an ideal solution for large woodworking shops and manufacturing facilities. Designed for continuous operation, the FAN4000 efficiently serves multiple woodworking machines generating dry waste. Main advantages of the machine Airflow capacity of 6,500 m³/h – efficiently removes dust, chips, and sawdust from multiple workstations. 4.0 kW / 400 V industrial motor – designed for continuous operation in industrial environments. Motor speed of 2,850 rpm – ensures reliable performance even under heavy workloads. Large Ø250 mm inlet and outlet connections – enable easy integration into industrial ducting and extraction systems. Compact dimensions (670 × 600 × 600 mm) – simplify installation in confined technical areas. Heavy-duty steel housing – resistant to vibration, mechanical damage, and corrosion. Construction and technology The FAN4000 has been engineered for demanding industrial environments. At its core is a centrifugal impeller dynamically balanced and mounted directly on the motor shaft. This direct-drive design minimizes power losses while eliminating the need for belts or additional transmission components. The powder-coated steel housing protects internal components against dust, moisture, and chemical exposure. High-quality bearings ensure long service life, smooth operation, and reduced noise levels. Precision and operating efficiency Thanks to its high airflow capacity, the FAN4000 efficiently transports large volumes of dry waste in real time. By maintaining constant negative pressure throughout the extraction system, it helps prevent clogging of filters, ductwork, and machinery. This contributes to stable production processes while protecting machine components from excessive wear. The FAN4000 is ideally suited as a central extraction fan for integrated dust collection and material handling systems. Applications The FAN4000 industrial extraction fan is suitable for: industrial woodworking facilities, furniture, window, and door manufacturing, workshops processing solid wood, MDF, and HDF, CNC machining centers and automated woodworking machines, conveying wood chips and sawdust to cyclones, silos, or collection containers. Standard equipment 4.0 kW three-phase motor (400 V) Direct-drive centrifugal impeller Powder-coated steel housing Ø250 mm inlet connection Ø250 mm outlet connection Optional equipment Flexible Ø250 mm suction and discharge hoses Connection reducers and machine adapters Cyclone separators and final-stage filters Blast gates, elbows, and duct tees Automatic machine start control systems Technical specifications Parameter Value Maximum airflow 6,500 m³/h Inlet diameter 250 mm Outlet diameter 250 mm Motor speed 2,850 rpm Dimensions (L × W × H) 670 × 600 × 600 mm Motor power / Voltage 4.0 kW / 400 V Weight 53 kg Rcjdpfx Aisvuqyrereh

Year of construction: 2026, condition: new, functionality: fully functional, power: 300 kW (407.89 HP), load capacity: 2,000 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Rcodeyy Rk Tspfx Airjh Mizar Recycling Machinery

Condition: new, Year of construction: 2026, overall weight: 3,000 kg, power: 35 kW (47.59 HP), shaft diameter: 400 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery Redpfxoz Erbxs Airech

Condition: new, Year of construction: 2025, Shot blasting booth with blasting carriage and rotary table for components with a diameter of up to D = 900 mm and a height of 400 mm. Aspiration system for abrasive media with cyclone separator. Extra sound insulation and an inner lining made of rubber with fabric insert. High-quality machine for continuous use in trade and industry. Rotary table with rotary drive, D = 800 mm, for heavy components up to 800 kg. Pneumatic lift-up door. Filtration system with pneumatic cartridge cleaning and dust filter for air discharge into the building. Rcjdpfed Sl Dbox Airoh For questions regarding technical specifications, etc., please contact us in writing or by telephone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 2,528 h, Compressor Kaeser M 56, year of construction 2003, 2528 operating hours, cyclone separator, with additional cooler for air, volume flow 5.6 m³, 4 cylinder Deutz, Ser.No.TP1229014603 Rcedpfx Aoun Rldeireh

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Rcjdpfoq Nia Isx Airjh Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently. Rcjdpfxsq Nxz Do Airsh

Condition: used, Technical details: welding current: 500 A Length: 590 mm height: 430 mm connection voltage: 400 V open-circuit voltage: 65 V capacity in kVA: 20,1 KvA protection class: IP23S weight of the machine approx.: 85 kg dimensions L x W x H: 0,60 x 0,44 x 0,44 m Kemppi FastMig KM 500 – MIG/MAG Welding Power Source The Kemppi FastMig KM 500 is a powerful industrial MIG/MAG welding power source designed for professional welding applications in metal fabrication, mechanical engineering, production and maintenance. With a maximum welding current of approximately 500 A, the KM 500 is particularly suitable for demanding welding work and applications requiring high welding performance and a high duty cycle. The power source is designed as part of the modular Kemppi FastMig system and can be combined with suitable Kemppi wire feeding units, such as the FastMig MSF series. The modular design allows the power source and wire feeder to be positioned separately, making the system suitable for both workshop use and larger workpieces. Typical applications: steel construction, mechanical engineering, heavy fabrication, repair and maintenance, production welding and general industrial MIG/MAG welding. * Rcjdpfxoz Dt Tgs Aireh

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ total power requirement: - kw Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency · Efficient filter cleaning thanks to flow-optimized filter head · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane * Rcedpfeyt I Axjx Airsh

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Rcedpfjz R Iq Uox Airoh Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our compact coil slitting lines are designed for efficient and precise slitting of light and medium gauge materials. These systems offer flexible configurations ranging from entry-level compact lines to more advanced solutions with integrated straightening units. The lines are engineered to provide stable operation, consistent slit quality and optimized production efficiency while maintaining a compact footprint and cost-effective investment level. AVAILABLE CONFIGURATIONS 1 mm | 1300 mm | 4 Ton | Pitless Compact Slitting Line 3 mm | 600 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) 3 mm | 600 mm | 6 Ton | Slitting Line with Straightener Unit 3 mm | 1000 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) SYSTEM CONFIGURATION OPTIONS Depending on production requirements, the line can be supplied with: Straightener unit for improved material flatness and feeding stability Pinch roller feeding system for compact and cost-effective operation Single pit or pitless design based on layout requirements TECHNICAL RANGE Material Thickness: 0.3 – 3 mm Coil Width: up to 1300 mm Coil Weight: 4 – 6 Ton Slitting Accuracy: ±0.1 mm MAIN LINE COMPONENTS Hydraulic decoiler (expanding mandrel system) Coil loading system (optional) Infeed system with pinch rollers or straightener unit Slitting head with precision knife adjustment Scrap winder system Tension unit and separator system Recoiler with hydraulic mandrel Electrical control and automation system (HMI controlled) ENGINEERING FEATURES High precision slitting performance Adjustable slitting knives with fine positioning system Robust gearbox-driven slitting head Stable tension control system Compact and modular machine design Rcedpfx Ajyzbm Ueireh Bidirectional operation capability OPERATIONAL ADVANTAGES Flexible configurations for different budgets and needs Compact design for limited factory space Stable and continuous production Easy operation and maintenance Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Sheet metal processing companies HVAC and construction materials Automotive sub-suppliers General metal processing industries

Condition: used, Technical details: voltage: 380 V / Hz weight: ca. 0,43 t dimensions L x W x H: 1,1 x 0,8 x 1,7 m Stationary welded steel construction Type 80 mm steel profile Application: Separation of mineral materials (sand) according to grain size operation by vibration 3x attachments Ø 610mm Rcsdpfxsu Tr T Es Aireh 1x separation pipe Ø 100mm attachment feeding screen Ø 580mm grain size 2mm Additional Separator attachment 5.5mm; 4.0mm and 3.5mm sieve inserts are optionally available for 150.00 Euro per sieve. *

Condition: new, Excavator Skeleton Bucket / Screening Bucket – Custom Manufacturing Galen Group manufactures heavy-duty skeleton buckets and screening buckets for excavators of all brands and operating weights. Each bucket is designed according to the excavator model, operating conditions, required bucket width, and screening gap. Main Applications * Separation of rocks, soil, gravel, and construction waste * Screening and sorting excavated material * Quarry and mining applications * Demolition and recycling works * River and canal cleaning * Landscaping and agricultural applications * Sorting filling and backfilling materials Product Features * Custom-made design for the excavator brand and model * Different screening gaps available upon request * Heavy-duty reinforced construction * High-strength and wear-resistant steel structure * Hardox wear-resistant steel options * Reinforced side walls and critical wear areas * Fixed or replaceable screening bars * Tooth-equipped or straight cutting-edge options * High-quality welding and precision manufacturing * Custom pin-on or quick coupler connection * Suitable for demanding working conditions Skeleton buckets can be manufactured for mini excavators as well as medium and large excavators. For a quotation, please provide: * Excavator brand and model * Machine operating weight * Required bucket width * Required screening gap * Pin diameters * Distance between pin centres * Inner and outer bracket dimensions * Quick coupler brand and model, if applicable All connection dimensions can be manufactured according to the existing bucket, technical drawings, or machine measurements. Why Galen Group? Rodpfezk Uubex Airech With more than 25 years of experience in manufacturing excavator buckets and attachments, Galen Group provides reliable and application-specific solutions for construction, mining, quarrying, demolition, and recycling industries. * Directly from the manufacturer * Custom engineering and manufacturing * High-quality materials and workmanship * Technical design support * Worldwide delivery * After-sales technical support * Production for all excavator brands and models The price depends on the excavator size, bucket dimensions, screening gap, material specification, and connection type. Please contact us with your machine details to receive our best quotation and estimated delivery time. GALEN GROUP Excavator Buckets and Special Attachment Manufacturer Made in Türkiye