Used Daewoo 225 Lcv for sale (56)

Condition: used, Year of construction: 2001, Vertical machining center Daewoo MYNX 500 Control type: Heidenhain 426 Table dimensions: 1200 mm x 500 mm Travel: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 625 mm Tool magazine: 30 positions Spindle speed: 80-8000 rpm Through-tool coolant / high pressure Tool taper: ISO 40 mm Motor power: 12/16 kW Rapid traverse: 24 m/min Handwheel control Brand new automatic chip conveyor by LNS Year of installation: 2001 Fjdpfxoypakme Ap Dspn CE Weight: 7,500 kg Complete with all documentation

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force Fpsdpfx Apez Afhpe Dsn - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DAEWOO MYNX 550 was manufactured in 2003. It features an X-axis travel of 1,200 mm, Y-axis travel of 650 mm, and Z-axis travel of 620 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 550 vertical machining centre we have for sale. Contact us for further details. Fodpfszrw Nkex Ap Djpn • Tool magazine capacity: 24 positions

Condition: good (used), Engine freshly overhauled (over 12tys zl). Fedpfxstt T Nfe Ap Dspn 100% operational I invite you to contact me

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 3,000 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 30,000 W, total height: 2,240 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: Series 18T-C / 16T-C, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details. Working capacity: • Swing over bed: 700 mm Fedpfx Asztyh Sep Djpn • Swing over saddle: 480 mm • Recommended machining diameter: 315 mm • Maximum machining diameter: 460 mm • Maximum machining length: 1,050 mm • Draw tube diameter: 91 mmAxis travel: • C: 360° (indexing increment 0.001°)Main spindle: • Chuck diameter: 304 mm • Spindle nose: ASA A2-8 • Spindle bore: 102 mm • Front spindle bearing diameter: 160 mm • Spindle motor power: 22/30 kWTool turret: • Tool holder type: VDI 50 • External tool height: 25 mm • Maximum boring bar diameter: 50 mm • Turret indexing time: 0.25 sDriven tools: • Speed range: 30–3,000 rpm • Motor power: 3.7/5.5 kW • Maximum collet capacity: 25 mm • Maximum tapping capacity: M20Feed rates: • X-axis rapid traverse: 16,000 mm/min • Z-axis rapid traverse: 20,000 mm/min • X-axis feed motor power: 3.8 kW • Z-axis feed motor power: 5.0 kWTailstock: • Quill diameter: 120 mm • Quill taper: MT6 • Quill travel: 120 mmElectrical data: • Power requirement: 50 kVA • Coolant pump power: 0.24 kWFloor space: 3,890 × 2,390 mm Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, New diesel generator set, power generator, emergency power generator RTE Type 50kVA - identical to DAEWOO DAGFS 50 New, unused Fpjdpfx Aoz Ek R Ssp Don Serial No. 6739 - FB2512886 - Year of manufacture 2026 Rated power 50 kVA Continuous power max. 40 kVA Standby power 55 kVA / 44 kW Rated current 33 Amps Voltage 400/230 Volts, 50 Hz 230 Volts, 50 Hz Fuel consumption 99-liter tank capacity for an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load approx. 11 liters/h Fuel consumption in standby mode approx. 4 liters/h Drive engine 4-cylinder diesel inline engine RICARDO ZH4105ZD Engine power at 1500 rpm 45 kW Engine power at 1800 rpm 55 kW Displacement 1500 cc Tank capacity 99 liters - Simple and compact design with sound-insulated metal housing - Forklift pockets for easy and safe transport - 3x CEE-16 Amp socket (3-pole, 230 Volt) - 1x CEE 16 Amp socket (5-pole, 400 Volt) - Terminals for cable power connection for external consumers, e.g. construction power distribution box - ATS module for grid replacement operation, for automatic emergency power switchover in case of power failure Space requirement L x W x H 2150 x 950 x 1200 mm Weight 900 kg New machine from stock

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, controller manufacturer: FANUC, controller model: 21-M, overall weight: 7,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DAEWOO MYNX 500 was manufactured in 2000. It features an X-axis stroke of 1,020 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 575 mm. The machine includes a table dimension of 1,200 x 500 mm and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 500 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 1,200 x 500 mm Additional equipment • Chip conveyor Fodpfx Apjzmgiie Dspn Technical Specification Taper Size ISO 40

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 Fpjdpsz Ek R Ejfx Ap Don New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Machine unladen weight approx. 200 kg Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Condition: used, Loading utility 500 Liter weight 0,3 t dimensions 1750 x 730 x 1080 m Electric tipper - Operating time with a fully charged battery: 8-10 hours - Battery charging time: 6-7 hours Fedpfxsyrhvce Ap Depn - Hydraulic tipping

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm Fedpfxexp Nfxj Ap Dopn TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Fjdpfetzgaqsx Ap Djpn Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: used, Year of construction: 2000, DAEWOO PUMA 300 LM Lathe CNC lathe with C axis Live tools: 4 units – 2 radial + 2 axial CNC FANUC 18-T CAPACITY Swing diameter over bed: 590 mm Fpodpfxjyx A Rvo Ap Djn Swing diameter over cross-slide: 450 mm Max turning diameter: 355 mm Max turning length: 1233 mm Bar passage: 76 mm Max drilling diameter with driven tools: 20 mm Max tapping diameter with driven tools: M16 TRAVELS X axis: 250 mm Z axis: 1330 mm SPINDLE Speed: 35 - 3500 rpm Spindle nose: ASA A2-8 Motor: 18.5/22 kW POWERED TURRET 12 stations for live tooling Live tool rotation speed: 40-4000 rpm AUTOMATIC TAILSTOCK Quill diameter: 100 mm Tailstock: MT5 Quill travel: 100 mm Total power: 50 kW Machine dimensions: 3990x1660x H 1820 mm Weight: 6700 kg INCLUDES Chip conveyor

Condition: used, Year of construction: 1998, Turning length 322 mm Max. swing over bed ways 510 mm Max. turning dia. 279 mm Spindle speeds 60-6000 rpm Spindle bore 53 mm Fpjdpfx Apjx N A N Ho Den Turret w/12 stations Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Various tool holders & collets 3-jaw chuck

Condition: used, Year of construction: 2025, fuel type: diesel, power: 5 kW (6.80 HP), total length: 800 mm, total width: 600 mm, total height: 600 mm, Generator capacity: 8,1 kVA Current frequency: 50 Hz Voltage: 230/400 Fodpfxsyay Tij Ap Dopn

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 362 mm, travel distance Z-axis: 1,105 mm, controller manufacturer: FANUC, controller model: 18 T, number of axes: 2, Horizontal turning machine manufactured in 2000. This DAEWOO Puma 350 features a reliable Fanuc 18T control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the DAEWOO Puma 350 machine we have for sale. Contact us for further details. Fedozb E Twspfx Ap Dopn • Condition: Good / Fully operational • Control System: Fanuc 18T Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 210 mm, travel distance Z-axis: 400 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This DAEWOO EcoTurn 200 features a reliable Fanuc 18 T control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the DAEWOO EcoTurn 200 machine we have for sale. Contact us for further details. Fodpfszb Ewiox Ap Depn - Manufacturer: Daewoo- Model: EcoTurn 200- Year of Manufacture: 1999- Condition: Good / Fully functional- Control: Fanuc 18 T Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, Fpedpfx Apsu Ib Drs Den - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: new, Year of construction: 2022, Daewoo, DAFL50A, 2022, scrub machine, brand: Daewoo; type: DAFL50A; year: 2022; NEW, NEVER USED, working width: 850 mm; electric: yes; hours on display: 0 hr; battery charger: yes; electric connection: 220 V; own weight: 160 kg; total dimension L: 1100 mm; total dimension W: 540 mm; total dimension H: 1020 mm; description: internal Fpjdpfx Ash Nuy Aep Don charger, unused, works on battery, batteries included; LOCATED IN POLAND

Year of construction: 2001, condition: used, machine/vehicle number: AV5E0888, 3-axis vertical machining center DAEWOO MYNX 500 HEIDENHAIN 410 Accessories: Chip conveyor with belt Remote electronic handwheel Fpjdpogay Iuofx Ap Dsn Automatic high-pressure coolant system through the spindle line

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, table load: 800 kg, spindle speed (max.): 1,100 rpm, number of axes: 3, This 3-axis DAEWOO Mynx 500 was manufactured in 1999. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 575 mm. The machine includes a T-slotted table size of 1200 mm x 500 mm and a maximum table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO Mynx 500 vertical machining centre we have for sale. Contact us for further details. • CE Marked: Yes • Part Counter: 2,430 • Cycle Time: 0 h 3 min 14 s • Current Active Tool: T0006 • Table Type: T-Slotted Fodpfx Ajzhb I Njp Djpn • Table Size: Typically 1200 mm × 500 mm

Year of construction: 2000, condition: excellent (used), machine/vehicle number: AV5C0171, 3-axis vertical machining center with rotary pallet DAEWOO ACE VC500 FANUC 18-M Fjdpfx Aega Edxep Depn Accessories: Chip conveyor with belt High-pressure cooling system (10 bar) through the spindle line No. 2 rotary tables, Comand TGV 200

Condition: used, Torni CNC Doosan Puma TW2600 Fedjw Slx Uspfx Ap Depn 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS

Condition: used, Year of construction: 2001, CNC FANUC 18i M X AXIS STROKE 2000 MM Y AXIS STROKE 850 MM Z AXIS STROKE 830 MM SPINDLE SPEED 6000 RPM SPINDLE TAPER ISO 50 DIN 69871 TABLE 2000 X 800 MM WORKPIECE LOAD 3000 KG RAPID FEED I X - Y - Z 12 MT/MIN COOLANT INTERNAL 5 BAR EXTERNAL HIGH PRESSURE 20 BAR ATC 40 PLACE Fsdekx E Tbspfx Ap Dspn 4 CNC AXIS ROTARY TABLE WITH TAILSTOCK CHIP CONVEYOR

Condition: new, Year of construction: 2022, Available in multiple units! Fpedpfx Apsiv Hf Ne Den Brand: Daewoo Model: DDAE10500DSE-3G Year of manufacture: 2022, New Capacity (kVA): 8.1 kVA (230V) / 7.5 kVA (400V) Engine brand: Daewoo Engine model: 500 Engine capacity (kW): 15 hp Fuel: Diesel Voltage: 230-400 Frequency (Hz): 50 Dimensions L x W x H (mm): 880 x 560 x 720 Weight (kg) approx.: 165 Quantity in stock: 100+ Comments: Max power: 8.1 kVA (400 V) / 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) / 6.7 kVA (230 V) Engine power: 15 hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time at 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7m: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

Condition: new, rated capacity 8,1 kVA voltage 400 / 230 V frequency 50 Hz tank capacity 15 l engine output 11 / 15 KW / PS weight of the machine ca. 0,165 t dimensions of the machine ca. 0,88 x 0,56 x 0,76 m Diesel generator with: Fsdpfxou Imgfs Ap Dspn - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function.