Used Dalex for sale (97)

Condition: good (used), I sell Dalex- Werke PMS11-3 spot welding machine, 172KVA, in bdb condition. Dkedpsu Sb Dtefx Afpjh

Condition: excellent (used), Year of construction: 1999, Welding machine make DALEX Type:VARIO MIC 400L year 1999 in very good condition, little used. Dksdpfx Afofgvvaepjh

Condition: used, Dalex Works Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA Dksdjg Rcpxjpfx Afpsh secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) Dedpfx Afoycv Saspskh - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: excellent (used), Pneumatically operated, water-cooled spot welding gun Hand-operated control valve Manufacturer: DALEX Type: 3238 Rated power at 50% duty cycle: 16 kVA Dkodpfoyh Rf Nex Afpoh Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm reach: 170 mm Equipped with double-stroke cylinder: long stroke 75 mm, pre-stroke 50 mm, working stroke with adjustable range 0-25 mm Cardan suspension and suspension bracket 10 m connection cable Including separate synchronous welding controller 1/01 TT

Condition: excellent (used), Pneumatically operated, parallel-guided spot welding machine Brand: DALEX Type: PMS 10-4 Throat Depth: 550 mm with double-stroke cylinder and approach stroke Rated power at 50% duty cycle: 50 kVA Dedpfxeyh Hlxj Afpekh Secondary short-circuit current: 24 kA Secondary open-circuit voltage: 5 V Electrode force: 65-390 daN Weight: 425 kg with mounted control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Sample photo Machine is currently being refurbished.

Condition: excellent (used), Pneumatically operated, water-cooled spot welding tongs Make: DALEX Model: 3326-3 with 5/2-way solenoid valve Double stroke cylinder – long stroke 60 mm, pre-stroke 40 mm, working stroke adjustable from 0–20 mm Rated output at 50% duty cycle: 22 kVA Secondary short-circuit current: 14 kA Secondary open-circuit voltage: 3.8 V Electrode force: 280 daN Dkedpjyh Hi Defx Afpsh With cardan suspension and suspension bracket 10 m connection cable and control line Arm reach: 350 mm Including: Remote welding controller type 1033

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1192166605, Offer 26006 Technical Data: - Rated output at 50% duty cycle: 80 kVA Dksdpoyhnl Nefx Afpoh - Maximum welding output: 211 kVA - Throat depth: 350 mm - Welding capacity: - Steel sheet: 8 + 8 mm - Brass sheet: 4 + 4 mm - Aluminium sheet: 4 + 4 mm - Adjustable electrode force: 120 – 720 daN - Required air pressure: 6 – 10 bar - Cooling water flow rate: 12 l/min - Control system: DALEX - Power supply: 400 V - Installation dimensions (approx.): W 950 x H 2100 x D 1500 mm - Weight (approx.): 600 kg - Including: complete electrical and pneumatic equipment - Separate recirculating cooling water unit

Condition: excellent (used), Year of construction: 2017, operating hours: 2,700 h, functionality: fully functional, arm reach: 2,033 mm, type of input current: three-phase, total height: 2,360 mm, total width: 5,203 mm, total length: 7,442 mm, load capacity: 600 kg, overall weight: 10,000 kg, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 600 kg, protection type (IP code): IP54, year of last overhaul: 2025, compressed air connection: 6 bar, repeat accuracy: 0.06 mm, Equipment: cabin, We are offering this very well-maintained DALEX / KUKA spot welding cell with robot handling, year of manufacture 2017. Manufacturer: DALEX / KUKA Model: Spotwelding Cell Robot Manipulated Machine type: Welding Robot Year of manufacture: 2017 The machine is a specialized welding system designed for spot welding pre-formed stainless steel components. The welds are created with pneumatically operated resistance spot welding tongs or a pneumatic spot welding unit. The setup includes one robotic arm for performing the resistance welding process and a second robotic arm for positioning and handling the welded parts. Out of operation since 2024. Annually maintained, including maintenance scheduled for 2025! Cell dimensions: 7442 mm x 5203 mm Robotized spot welding cell in compliance with EC conformity 200/427EG 2004/108/EU Electromagnetic Compatibility (EMC) / 2006/95/EU Low Voltage Directive / 2003/10/EG Noise Emissions 2x KUKA KR60-3 robots (service by KUKA scheduled for 01/2025) Operating hours: Robot 1: 4,500 h / Robot 2: 8,200 h Nominal payload capacity: 600 kg Maximum reach: 2,033 mm Mounting position: Floor Repeatability (ISO 9283): 0.06 mm Controller: KR C4 Number of axes: 6 Ambient operating temperature: 10 °C to 55 °C (283 K to 328 K) Protection rating (IEC 60529): IP65 2x KUKA KR300 R2500 ultra robots (service by KUKA scheduled for 01/2025) Operating hours: Robot 1: 2,700 h / Robot 2: 6,100 h Nominal payload capacity: 300 kg Maximum reach: 2,496 mm Mounting position: Floor Repeatability (ISO 9283): 0.06 mm Controller: KR C4 Dsdpfxoyhcipj Afpjkh Number of axes: 6 Ambient operating temperature: 10 °C to 55 °C (283 K to 328 K) Protection rating (IEC 60529): IP65 Control software: SW8.3.30 Resistance welding unit Harms & Wende mid-frequency inverter 2x Genius HWI408 If you have any questions or require more information, please send us a message or give us a call.

Condition: used, - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA Dksdjydrbmspfx Afpsh - Electrode force: 17 - 278 daN - Weight: approx. 240 kg

Condition: used, - Type PL 40-2 - Rated power at 50% duty cycle: 40 kVA Dodpfx Afeydracjpskh - Max. welding power: 118 kVA - Electrode force: 65 - 390 daN - Weight: approx. 315 kg - Cooling water quantity: 4 l

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Dodpfx Aou Nv Emefpskh Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Condition: used, Technical details: power consumption: 20 - 300 A welding current: U1 = 380 V Dkjdpfxeu Nwgro Afpsh connected load: 14 kVA weight of the machine approx.: 171 kg dimensions of machine: 0,9, x 0,5 x 0,92 m Transformer - Welding machine - Welding transformer Control: 14 levels for thin sheet metal and 14 levels for thick sheet metal air-cooled Protection class P 21 with electric welding gun with cable approx. 6.0 meters Ground clamp and earth cable approx. 4.0 meters *

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 390 kg, cooling capacity: 9.5 kW (12.92 HP), Coolling water recooler cooling capacity: 11,5 kW Dkodpfxowdvfqo Afpsh weight: 390 Kg.

Condition: used, Spot welding device, spot welding machine, spot welding system, spot welding gun -Manufacturer: Dalex, spot welding machine type A11.1 -Voltage: 380 V. -Transport dimensions: 230/270/H205 mm Dksdpfefnqhpox Afpeh -Weight: 20 kg

Condition: good (used), Balancer, machine balancer -Type: D5-45 -Load capacity per piece: 30-45 kg -Rope length: 2 m -Quantity: 2 pieces available -Price: per piece -Own weight: 18 kg Dksdscii N Iepfx Afpoh

Condition: good (used), 1 used gas-shielded arc welder make Dalex type Variomig Djdpfxsu Ub E Ts Afpokh Technical data Welding capacity at 500 A 60 % Welding capacity at 315 A 100 % Weight 135 kg Water-cooled version ready for welding with torch earth cable pressure regulator earth cable

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm Dkodpfxovuz N Rs Afpeh incl. foot switch

Condition: good (used), TIG welding machine, welding machine, TIG welding machine -TIG welding machine AC/DC direct/alternating current -Hose packages: 3 -Max. welding current: 225 A Dkjdpfx Afed Naw Iopeh -Air-cooled -incl. ground cable -Gas valve -Dimensions: 610/1270/H860 mm -Weight: 288 kg

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Dkedpfx Ajx Ic T Ajfpeh Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: good (used), TIG welding machine -Nimak electrode unit -Dalex converter Dedpfxjb A H I So Afpekh -Hose package -ground cable

Condition: excellent (used), overall weight: 955 kg, projection welding machine execution B/DHZF projection 350 mm Make DALEX Type PMS 34-4 rated power at 50 % ED: 160 kVA Sec. short-circuit current: 99 kA Sec. open-circuit voltage: 5.8 - 9.74 V electrode force: 140-2,040 daN with 4-step switch Dedpfxep H T Ads Afpokh add-on control cabinet according to VDE 0100 with main switch Synchron-100 program control MPS 8043/1

Condition: excellent (used), Welding control unit for DALEX spot, projection and seam welding machines Make Harms+Wende type RATIA 43a Slide-in unit for 19 " housing Key programming with LCD display 128 programs Operating modes: single spot - series spot, seam welding Dkodpfx Afjr Ei Dlopjh Dimensions W/D/H in mm: 450 130 280 function-tested - ready for immediate use

Condition: excellent (used), Air-operated, water-cooled rocker-arm spot welding machine Brand DALEX Type SL 16/S Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Secondary open-circuit voltage: 1.8 - 3.5 V Electrode force: 278 daN Arm reach: 180-500 mm adjustable Arm spacing: 140 or 300 mm With 8-position switch for power preselection Djdpfjv Sql Nox Afpokh Additional control unit 1036

Condition: like new (used), Slide-in welding control unit for spot. roller seam and projection welding machines Make HARMS+WENDE (DALEX) TYPE MPS 200 MULTI Current rise Pulse operation 8 welding programs Dkedpfx Afottmzpopjh Installation dimensions W/H/D in mm 160 290 85