Used Dc Voltage Generator for sale (19,721)

Condition: good (used), SPG. Regulator, generator control, generator voltage regulator, for generator, -Manufacturer: Nucleus, Generator DG1-1000 -Technical data: see photo of the nameplate -Number: 11x generator available Lsdoxnxdnepfx Akfork -Price: per piece -Dimensions: 320/320/H95 mm -Weight: 4.2 kg/pc.

Condition: used, Year of construction: 2007, Low voltage synchronous generator - vertical - manufacturer Siemens, Czech Republic, 895kW, 400V, 1500 rpm, fully functional, all technical documentation and test report. Lrsdswmy Etjpfx Akfjk

Condition: good (used), Servo motor, electric motor, direct current motor, direct current generator, electric motor with direct current generator -Spare part: comes from a Scharmann boring mill -Manufacturer: Kessler, electric motor with direct current generators Lrsdpfx Akjgiy T Ejfek -Three-phase motor type: DM21-16 32 kW 2880 rpm -DC Gen. Type: G 50/42/1 6/18 kW -DC Gen. Type: G 44/14/2 8.2 kW -Technical data: see photos nameplates -Dimensions: 1750/580/H540 mm -Weight: 886 kg

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: DC09 072A/02-13, General information Field of application: Construction Weights Empty weight: 5.500 kg Lrsdpfx Ajt Hc Ihokfek Functional Generator capacity: 330 kVA Other information Fuel consumption: 197 g/kWh Generator: Mecc alte Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1200 l Transport dimensions (LxWxH): 3,8x2,2x2,49 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Hübner GMP 1.0 LS-7 Analog - Tacho LongLife DC - Tachogenerator , Hole spacing of the mounting holes: 113 x 113 mm , Ø drive shaft: 12 mm , unused, good condition, 100% functional Lsdpfx Aei D Idmekfsrk

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. Ljdeu Nzwujpfx Akferk *

Condition: new, analog speedometer Lrodpfx Asbntx Rokfok 400 volt unused

Condition: excellent (used), For sale: Industrial electric motor with DC electromagnetic brake. Complete drive unit suitable for use in industrial machinery, overhead cranes, hoists, conveyors, and other equipment where shaft stoppage is required immediately upon power disconnection. The motor has been removed from industrial machinery. Visual condition is very good – standard signs of use, technically flawless. The electromagnetic brake ensures instant shaft stop and locking, a feature commonly used in drives requiring a high level of safety. Technical details: Motor manufacturer: Cantoni Motor type: 3-phase Power: 5.5 kW Voltage: 400 V Frequency: 50 Hz Speed: approx. 950 rpm Protection class: IP55 Insulation class: F Lsdeyridbjpfx Akfork Brake: DC (direct current) Braking torque: 150 Nm Brake supply: 180 V / 75 W Year of manufacture: 2018 Made in the EU PRICE IS PER PIECE.

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Ledpfx Aov Uag Iokfjrk

Condition: excellent (used), Direct from closed ready meals manufacturer in London. Lredpfx Akeywpb Sefok

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Ledpfxsud R T So Akfork

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Lodjyl Nntspfx Akferk

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Lrodpfew U N Dasx Akfok

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Lrodpfox U Tgmjx Akfjk The unit looks as good as new. The system was only in operation for a short period.

Year of construction: 2016, condition: excellent (used), machine/vehicle number: SI25t, DEMAG hook block P DH PK DK DC Ljdeupwn Ujpfx Akfsrk Payload 25000Kg / 25t mint condition - unused Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: K118, Demag / Cranetool Stahlbau Gantry Crane Crane Sky Crane Runway Dimensions approx. 20.3 x 5.2/7.55m with bridge crane Width with 2 protruding posts + 150 + 80cm Payload/lifting capacity 2500 KG Technical data of the system: Crane track/steel construction consisting of HEA240 HEB220/260 HEM240 - beam Upper bridge 6.45m UK bridge 6.1m Top rails 6.06m UK rails 5.84m Hook height 5.45m Track width 4.96 m Total width outer edge 5.2m / 7.55m Inner edge of steel construction 4.96m Base plate steel construction 43x35 + 60x60cm Support spacing 9.5+10m The system is delivered complete: Steel construction with power supply 1 bridge with 2500 kg Demag DC-Com chain hoist BJ 2017 !!! Documents are available, more pictures on request. Crane is dismantled and available immediately The location of the article is 75053 Gondelsheim Very good condition, see pictures Lrodjmkfulepfx Akfsk Dispatch by forwarding agent or pick-up only by appointment

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Lsdpfx Aspcibmjkfjrk

Condition: good (used), Year of construction: 2013, DC Norris 2700 Industrial Wok Serial: 2827 Lrsdpfsw Ulbbjx Akfjk 2013, Stainless, 150L capacity, tilting, HMI Touch screen controls, tilting for discharge, comes with a thermal oil heater for the jacket, 3Ph

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Lsdpsxfrv Esfx Akferk Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: refurbished (used), Spako 225 litre electric heating, thermal oil Jacket vessel With strong agitator, scrape sides Tap discharge Piped to hot depositor for set weights and then clipped Lrjdpfoxwlk Hex Akfsk Complete system being refurbished.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Output current: 72 A Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Voltage: 400/230 V Phases: 3 Lrsdpjy Emwyjfx Akfsk Fuel type: Diesel Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg EQUIPMENT CE marking Suitable with ATS switching system for mains takeover

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 Lrsdpfxju Dbuce Akfok maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: gas, power: 2,547 kW (3,462.95 HP), output voltage: 10,500 V, output frequency: 50 Hz, total length: 1,300 mm, total width: 300 mm, total height: 300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Genset mtu 20V4000L64FNER, 10500 V (Natural Gas) ⁠Exhaust silencer and chimney Skid group Lodpfxjy Eyw Tj Akfjrk ⁠Control panel MMC and auxiliary panel ⁠Integrated oil tank ⁠Fire and smoke detection systems Ventilation and air filtration systems Sound and weather proof container 13x3x3m =Technical specifications= Engine type - mtu 20V4000L64FNER Electrical power - 2547 kW Engine speed - 1500 rpm Electrical efficiency - 44.1 % Total efficiency - 90.4 % Alternator type - Stamford S9 H1D G42 Wdg83 Voltage - 10500 V Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Time for delivery - 4 months Transport dimensions (LxWxH) - 13x3x3 m Production country - Germany

Condition: refurbished (used), functionality: fully functional, Universal Processing System: FESSMANN systems are typically designed for multiple processes, which may include: Drying,Smoking (Hot or Cold),Cooking (Boiling or Steaming),Reddening / Maturing, Roasting / Baking Smoke Generator: The "RZ" model designation often points to a smoke generator unit, which is an essential component of a larger smokehouse or universal system, providing the smoke for the chamber. However, given the full stainless steel structure, it might be a compact, integrated unit. Technical Data: Model: RZ 7 108 Voltage (Main) 380V 3Ph 50Hz (Three-phase) Control Voltage 230V∼ (Alternating current) Motor Power 0.3kWHeating Lrsdpfx Asxv Smrekfek Power 1.1kW Smoking ClassZH1 216 1.1

Condition: good (used), functionality: fully functional, The VEMAG Smoke Gen Model: 501/E is a dedicated smoke generation unit manufactured by VEMAG ANLAGENBAU. It is designed for industrial use, providing consistent smoke output for commercial smoking and cooking houses. Performance & Control Manufacturer Quality: Produced by VEMAG ANLAGENBAU, a highly regarded name in food processing equipment. High Generation Rate: Capable of a Generation Rate of Up to 250m3, making it suitable for large-volume smokehouses. Reliable Power: Operates using an industrial Operating volt of 400 V / 50 Hz, ensuring stable power delivery for continuous operation. Controlled Power Consumption: Has a Total power of 26 A and a Fuse of 35 A. Lrsdpfx Aksxv Srhofjk Operational Benefits Industrial Connection: Features a Tube Connect of DN125 for robust and secure integration with the smokehouse ductwork. Durable Construction: Built with stainless steel, ensuring longevity, resistance to the smoking process, and simplified cleaning. Excellent Condition: This unit is ready to be connected and put into service, offering reliable smoke generation performance.