Used Deckel Fp 2 for sale (718)

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1600mm/675mm, max. table load: 2000kg, speed: 6300rpm, feed: 10m/min, rapid traverse X: 10m/min, quill stroke: 800mm, tool holder: SK40, spindle power: 12kW. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/2300mm, weight: approx. 7000kg, control: Deckel Dialog 11. The screen and the drive modules of the X and Y axes have been replaced. The rotary axis is disconnected and defective. Documentation available. On-site inspection is possible. Bwjdpfxowzbblo Agksi

Year of construction: 1986, condition: ready for operation (used), A universal tool milling machine Deckel from the 1980s is available. Travel X/Y/Z: 300mm/160mm/340mm, table dimensions X/Y: 600mm/250mm, max. table load: 150kg, tool interface: SK40, speed: 2000rpm, feed rate: 1200mm/min, machine dimensions X/Y/Z: approx. 1200mm/1100mm/1500mm, weight: approx. 700kg. On-site inspection is possible. Bedpfxeygmcwe Agkswi

Condition: good (used), Year of construction: 1987, Tool milling machine DECKEL FP 4NC, No. 2810-0564, year of manufacture 1987, table size 700 x 430 mm, travels XYZ = 500 x 500 x 600 mm, control GRUNDIG Dialog 4 Bwjdsyhqtvopfx Agkji

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) Bwjdox S Edlspfx Agkoi - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung Bsdpfsu Ndcmjx Agkswi spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: Bwedpjrn I Rzjfx Agksi x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty Bedpfxox It Rxs Agkswi The machine is technically in the condition of its year of manufacture.

Condition: good (used), Year of construction: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control System, Year of Manufacture 1990, Completely Overhauled in 2014, Excellent Condition, CE Compliant! This machine comes from the training workshop of Continental. Technical Data: Year of Manufacture: 1990 Completely Overhauled: 2014 Digital Readout: 3-axis active digital readout HEIDENHAIN TNC 113 X-Axis Travel: Bwsdeyalcpepfx Agkei 500 mm Y-Axis Travel: 400 mm Z-Axis Travel: 400 mm Tool Holder: SK 40 hydraulic tool clamping DIN 2080 Milling Head Type: Vertical milling head Speed Range: 50 - 2,500 rpm, 18 steps Table Type: Swivel table Clamping Surface Table: 800 x 490 mm T-slot Size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: Heidenhain TNC 113 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, control manual, and programming examples Hand wheels Coolant system About the machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control unit. This universal milling machine is in excellent original condition, having only been used for training purposes in a facility. The control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is straightforward thanks to the tilting vertical head. The guides are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Deckel under power on-site. You will find more milling machines from renowned manufacturers on our website.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2351, travel distance X-axis: 490 mm, travel distance Y-axis: 370 mm, spindle speed (max.): 2,000 rpm, table width: 255 mm, table length: 900 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business liquidation. Placing a bid obligates the buyer to collect the machine promptly between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel on X-axis: 490 mm Travel on Y-axis: 370 mm Spindle speed: 40 – 2,000 rpm Tool holder: SK 40 Automatic spindle head movement: 290 mm Manual spindle head movement: 300 mm Bjdpjxqm Aqofx Agkowi Manual milling spindle height adjustment: approx. 100 mm Table dimensions: 900 x 255 mm Feed range: 10 – 500 mm/min Rapid traverse: 1,500 mm/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,500 x 1,900 mm Weight: 1,500 kg EQUIPMENT 3-axis digital readout Machine vice mounted (jaw width 160 mm)

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Bwedov R E Rdopfx Agkji Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: refurbished (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with stepless feed year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance with test report accessories: - 3-axis digital display FAGOR Innova 30i-M, new Bodpfsdf E H Asx Agkjwi - fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: Bwodpfx Agjtdnb Eekoi - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawing thread M 16 - Central lubrication, manually operated - Coolant system - Operating instructions Used as seen The machine is technically as it was built at the time.

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display Bsdpjmhfrrefx Agkewi FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: reconditioned (used), Year of construction: 1987, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1987 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-3429 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) Bwjdpfx Ajhtrd Iegkji - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating instructions - Used as seen -

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Accessories: Bwodpfx Agelfc U Dskoi - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: reconditioned (used), Year of construction: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Bwsdpfx Agjfzbtmekji Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-8668 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Bjdoh Rv U Ejpfx Agkewi Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Bwsdpfshhuf Hox Agkji Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Bodeghtvajpfx Agkswi Weight 690 kg In good condition

Condition: good (used), Year of construction: 1995, Universal tool milling machine cover FP 1 several machines see pictures Type : FP 1 3-axis digital readout Heidenhain Price : from 9.500€ excl. VAT Technical data: x-path: 300 mm y-path: 150 mm z-path: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed steps work spindle: 8 Feed range: 10 - 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle holder: SK 40 ... Bwjdpstdcfhjfx Agkji Dimensions/weight: 1235x1160x1800 / approx. 800kg

Condition: good (used), TOOL MILLING MACHINE - Deckel FP 3 incl. Heidenhain 3-axis digital readout - Machine with spindle brake motor - Travel X/Y/Z 500x300x400 mm - Automatic feeds on all 3 axes - Rapid traverse on all 3 axes - Heidenhain 3-axis digital readout Bwjdpfx Agox Nh D Askoi - Speed range 40-2000 rpm - Swivelling vertical head with quill - Vertical-horizontal milling device - Tool holder ISO 40 - Drive power 3 kW - Rotary/tilt/swivel table - Coolant system - Machine feet - Machine documentation Dimensions: LxWxH 1.6x1.2x1.8 meters / Weight: 1500 kg Errors and input mistakes excepted.

Condition: good (used), DECKEL High-Speed Milling Head No. 2021-2230 / FP 4 - 0199 This high-speed milling head is suitable for a DECKEL FP 1 / 2 / 3 / 4. When used on an FP 1, an intermediate plate is required. Spindle mount SK 40 Spindle speed range 40 - 2000 + 125 - 6300 rpm. Quill adjustment Bedjwg Rybspfx Agkjwi Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 1,000 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 1,900 rpm, machine/vehicle number: 50025, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: 19 – 1,900 rpm Bwedpfx Ajxqmpdegkoi MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 900 x 1,600 mm Weight: 700 kg

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 Bwjdpfx Agjpn Rgvokji with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions Bwodpfxjr En Dys Agkji used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.