Catalog No. : 5257
Fju0vqcse
Type: FWM
Producer: TOS
Made in: 1985
Characteristic:
Minimum rotary speed of the vertical spindle: 90 1/min
Maximum rotary speed of the vertical spindle: 1400 1/min
Machine weight: 5100 kg
x-travel 300 mm
y-travel 150 mm
z-travel 340 mm
feed - longitudinal/cross 10 - 500 mm/min
spindle turning speed range 40 - 2000 U/min
table-size 600 x 210 mm
tool taper SK 40
total power requirement 1,0 / 1,4 kW
weight of the machine ca. 0,6 t
Hlkfvcpvc
dimensions of the machine ca. 1,0 x 1,1 x 1,6 m
x-travel 300 mm
y-travel 150 mm
z-travel 340 mm
turning speeds 60 - 1900 U/min
F7mcvccwi
table: 195 x 600 mm
spindle taper 40 SK
total power requirement 1,5 kW
weight of the machine ca. 700 kg.
range L-W-H 0,8 x 1,1 x 1,7 m
Furnishing:
- Universal tool milling machine
- FAGOR / ELESTA digital display for X & Z axis
- Feeds: X and Z axes
- vertical milling head
- Switch cabinet
- Coolant device with chip collection tray
- Required instructions
x-travel: 320 mm
y-travel: mm
z-travel: 360 mm
spindle taper ISO: SK 40
turning speed range: bei 90 - 900 U/min
spindle head swivable left - right: je 90° °
travel -y axis: Vertikalspindel: 200 mm
distance table - lower edge spindle: min./max.: 50 / 400 mm
quill stroke: 80 mm
feed:: Tisch: stufenlos 14 - 71 mm/min
table surface area: 630 x 200 mm
table load capacity: 100 kp
Btmte7btpn
table swivelabel +/-: re/li je 30°
total power requirement: 4,0 kW
weight approx.: 1.200 kg
dimension machine ...
x-travel 390/400 mm
y-travel 190/200 mm
z-travel 390/400 mm
turning speeds 40-2000 U/min
feed 8-400 mm/min
rapid traverse 1200 mm/min
quill stroke 100 mm
tool taper Sk 40 x S 20 x 2
drive motor 2,2 kW
weight of the machine ca. 1,0 t
Mechanic: good
Optical condition: good
The machine can be viewed under current.
2202-10876
380 V, 50 Hz
Color: RAL 6011 reseda green
equipment
* Milling spindle protection integrated in the emergency stop chain (at extra
cost)
* 3-axis active Heidenhein...
x-travel:800 mm
y-travel:300 mm
z-travel:400 mm
Izeyzgx
serial number 1796
x-travel 750 mm
y-travel 280 mm
Bjdmh2omge
z-travel 250 mm
digital Heidenhain
weight of the machine ca. 2,9 t
vice
Universal milling machine Fabr.ORADEA
Gil2a2ams
Type:FUS22M.2 year 1999 with 3 axes digital indicator Acu Rite
Spindle holder:ISO40
18 spindle speeds:45-2240rpm
Travels:X320mm Y240mm Z400mm
Clamping table:320mmX670mm
Universal table available
Vorschübe:12,5-630mm/min
Rapid traverse:1200mm/min
Cooling renting device,machine lamp,
Machine documentation available
Machine in good condition under power demonstratable.
Merk: Heckler&Koch
Type: AM443
Mechanically oke.
Electrically reparatürbedurftig
Technical data:
Universal tool milling machine with hydraulic tool clamp.
Spindle mounting: SK40
table clamping surface: 850x225mm
ways X: 390mm
ways Y: 330mm
Btmf2ksrsz
ways Z: 380mm
Rotational speed: from 63-2800 rpm
drive power: 3KW
Offered is a conventional Hermle FWH 600 milling machine with 90° swivel head and a mechanical machine vice from Brockhaus. Because of the small design, ideal for model making.
The machine is ready for operation and can be tested under power.
X-way 280 mm
Y-way 125 mm
Bvyfk8gj7q
Z-way 225 mm
Machine weight: approx. 0.6 t
Price net ex works, free loading.
x-travel 500 mm
y-travel 320 mm
z-travel 370 mm
2rgpfi
control TNC 310 HEIDENHAIN
spindle taper ISO ISO 40 DIN 2080
spindle turning speed range 63 - 3150 U/min
table-size 800 x 320 mm
table load 400 kg
feeds -stepless- 10 - 1000 mm/min
rapid traverse 2 m/min
power capacity 3 kW
quill stroke 60 mm
coolant
voltage 400 V
total power requirement 5,87 kW
weight of the machine ca. 2,2 t
dimensions of the machine ca. 1,68 x 1,70 x 1,89 m
Milling Head pivotable +/- 90°
electronic hand wheel
Single phase
Spindle 1''
Bvogjinlg8
Table 28'' x 6 1/2''
Cross travel 5''
Longitude travel 15''
Horizontal arbor
Indexing head
Deckel FP1 toolroom milling machine with Heidenhain TNC123 aktif digital in excellent condition. This machine comes from a scientific government instute.
Machine Nr.2102-36104.
Year of contruction 1995
Specifications:
- Machine speed: 40 - 2000 rpm
- Power feed X/Y/Z infinitely variable
- Rapid feed X/Y/Z
- X / Y / Z: 300/160/340 mm
Corzil9
- Spindle brake
- Spindle nose vertical and hor. SK40/S20x2
- Weight about 800 Kg
Accessories and equipment:
- 3-axis actif digital readout...
x-travel 300 mm
y-travel 200 mm
z-travel 350 mm
table-size 700 x 200 mm
Y3aiml
spindle taper ISO 40
turning speed range - horizontal 150 - 1660 U/min
turning speed range - vertical 110 - 1230 U/min
quill stroke 120 mm
spindle drive 3,0 kW
weight of the machine ca. 1,15 t
dimensions of the machine ca. 1,31 x 1,38 x 1,65 m
3 axes digital display ACU-RITE III
Travel: X = 310, Y = 160, Z = 320 mm.
Spindle mounting: SK 40 with M 16 tightening thread.
Spindle speed: 40 - 2000 rpm, with selector disk
M0vpg2i9
Universal swivel milling head and horizontal milling spindle.
Incl. angular table 200 x 600 mm,
various tool holders, machine vice,
machine light, coolant system
and documentation. Weight: approx. 700 kg.
The machine can be inspected and demonstrated under power by arrangement and is available immediately. Free lo...
3-axis active digital display HEIDENHAIN TNC 113
Year of construction: 1987
Stroke: X 300 Y 160 Z 340
Speed range: 40-2000 rpm with the following accessories:
Solid angle table 600 mm x 210 mm clamping surface
Hydraulic vise jaw width 115 mm
Sliding vertical milling head
Butt head
Telescopic drilling tailstock
Thrust bearing for horizontal milling
Continuous feed via potentiometer
Tool Cabinet
15 PCs. dollies short, 2 STK. dollies long
Machine lamp
Bdvkfqoq3c
Automatic central lubrication pump
...
Universal milling machine make UNIMAC type FM 1
machine. # 4193
Technical data:
Working surface of the fixed box table 600 x 240 mm.
longitudinal movement 300 mm
Vertical movement 200 mm
K02mrgllm
transverse movement 350 mm
Spindle support ISO 40/ Morse 4
17 automat. feeds 10 - 208 mm/min
12 spindle speeds 63 - 1200 rpm
drive power 1,1 / 1,9 kW
dimensions L x W x H 1160 x 1180 x 1800 mm
weight approx. 750 kg
used
x-travel 300 mm
y-travel 350 mm
z-travel 150 mm
total power requirement 2,5 kW
weight of the machine ca. 700 kg
dimensions of the machine ca. m
Dxj9jy
Standard accessories
fixed angular table 210 x 600 mm
movable vertical milling head ISO40/20x2
various tool holders
0d0cnie
various collets ISO40/20x2
HEIDENHAIN active digital measuring device, 3 axes
machine light
Coolant device
Documentation
Mikron WF2SA Active .
Hhwhituia
Heidenhain Active Control.
Sold as shown .
Ready for use and immediately available.
Subject to prior sale and errors.
HEIDENHAIN 3 axes digital readout
Travel: X = 310, X = 160, Z = 320 mm.
Spindle mounting: SK 40 with S 22 x tightening thread.
Spindle speed: 40 - 2000 rpm via dial.
Universal swivel milling head with drilling spindle sleeve, stroke: approx. 50 m.
Horizontal milling spindle, universal turning, swivelling and tilting table,
various tool holders, coolant system
and documentation. Weight: approx. 700 kg.
The machine is technically in good condition,
I9fbdid
optically not so good anymore and can be ...
X/Y/Z 300/160/340 mm
Digital unit 3-axis HEIDENHAIN TNC 111 (2-axis active)
Speed 40-2000 RPM
Feed (stepless) 5-500 mm/min
Rapid feed 1200 mm/min
Stroke quill 60 mm
Table surface 210x600 mm
Taper in spindle ISO 40
Power 1,5/1,9 kW, 50 Hz
Dimension incl. electrical cabinet (WxDxH) 100x150x175 cm
Nfcij
Weight incl. electrical cabinet 775 kg
Accessories:
1 set of manuals in German
For sale universal tool milling machine type ALG-100, produced by Zagreb Machine Tool Factory in Yugoslavia in 1957.
Fubkdir7y
Price is net price.
Parameters of the milling machine:
Horizontal spindle rotation: 60 - 1175 rpm
Number of revolutions: 12
Horizontal spindle travel (maximum): 170 mm
Morse taper: 4
Hole of collet: Φ 17 mm
Dimensions of table: 690 x 260 mm
Number of T-slots: 4
Longitudinal travel of table: 310 mm
Vertical travel of table: 265 mm
Motor rotation: 700/1400 rpm
Electric mot...
Used tool milling machine from a tool shop.
travels:
X-axis 300 mm
Y-axis 200 mm
Buws3jscuh
Z-axis 350 mm
spindle admission SK 40
Automatic feeds in X and Z axis
angular table 620 X 250 mm
Dividing head with matching counter holder
Didactic computer-controlled CNC machining center with interchangeable control, added licenses FANUC 21, Siemens 840 and Heidenhain 426 Basic technical data: • Workbench dimensions (LxW) 420x125 • Workbench design with "T" grooves • Workbench load 10 kg • Stroke on the 'X' axis 185 mm • Stroke on the 'Y' axis 100 mm • Stroke on the 'Z' axis 200 mm • Art. spindle speed from 150 - 5000 min-1 • Fast movements along the 'X', 'Y', 'Z' axes • N...
Table: 635 x 255 mm
spindle speed: 410 - 1450 rpm.
Dmlfjj2
spindle mounting: MK4
travels:
x = 370 mm
y = 200 mm
z = 350 mm
spindle drive: 1,0 kW
Remark:
Machine vice 100 mm,
8 collets 6-22 mm,
various milling cutters with holders,
separate drilling machine table, side mounted 330 x 370 mm,
drill chuck
Weight: 400 kg
Travel: X = 310, Y = 160, Z = 320 mm.
Blew2qwifc
Spindle mounting: SK 40 with S 20 x 2 tightening thread.
Spindle speed: 40 - 2000 rpm.
Unversal swivel milling head with drilling spindle sleeve.
Horizontal milling spindle with counter bearing.
Incl. angular table 200 x 600 mm,
various SK 40 direct collets, machine light,
coolant system and documentation. Weight: approx. 700 kg.
The machine can be inspected and demonstrated under power by arrangement and is available immediately. Free loading ex ...
X/Y/Z 300/160/340 mm
Digital unit 3-axis HEIDENHAIN TNC 111 (thereof 2-axis active-digital)
Bez297lcfl
Speed 40-2000 RPM
Feed (stepless) 5-500 mm/min
Rapid feed 1200 mm/min
Stroke quill 60 mm
Table surface 210x600 mm
Taper in spindle ISO 40
Power 1,5/1,9 kW, 50 Hz
Dimension (WxDxH) incl. electric cabinet 113x142x165 cm
Weight incl. electric cabinet 775 kg
Accessories:
1 tool cabinet with a lot of accessories
1 set of manuals in German
Tool milling machine with CE
Tool holder SK 40
3-axis feed with rapid traverse
Gdcfblxdg
Drilling quill
Travel X 320 mm Y 200 mm Z 300 mm
- Accessories available.
- Digital display Heidenhain.
Table
Usable table surface 700 x 250 mm
Travel
X-way 320 mm
Y-travel 150 mm
Z-travel 370 mm
Brlnc9iwty
Automatic table movements
8 feeds lengthwise 11 to 210 mm/min
8 feeds vertical 11 to 210 mm/min
Fast feed of the table
longitudinal and vertical 1000 mm/min
ISO 30 mounting
Spindle speeds
Stepless by means of speed controller 58 - 2000 rpm
Motor for spindle drive
Power 2 HP
Speed 1500 rpm.
Net weight of the machine 500 kg
Space requirement:...
Universal tool milling machine make THIEL type Duplex 155
make # 155134 year of construction 1978
technical data:
Table longitudinal travel = X (aut.) 340 / 350 mm
headstock cross travel = Y (manual) 200 mm
table travel vertical = Z (aut.) 340 / 350 mm
vertical clamping surface 700 x 226 mm
Spindle mounting ISA 40
12 spindle speeds 18 - 2000 rpm
12 automatic feeds longitudinal + vertical 4 - 545 mm/min
overhang hor. spindle - fixed table 50 - 440 mm
quill stroke 60 mm
milling head rotatable 360
...
Universal tool milling machine
Make: DECKEL
Model: FP 1
Year of construction: 1976 - workshop tested
Machine no.: 53426/08
geometric acceptance with test report
Accessories:
- 3-axis digital display
Bi2mnfc0tw
Heidenhain ND 750
- Fixed table 600 x 210 mm (T-slot 12 mm)
- Vertical milling head SK 40 with tightening thread S 20 x 2
- Coolant system
- Counterholder with counter bearing
- Operating instructions
- used, as seen, but without guarantee -
The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands in terms of accuracy and flexibility - and that at an unbeatable price-performance ratio.Machine highlights:- Machine stand in compact and vibration-free grey cast iron construction- Pivotin...
X/Y/Z 300/160/340 mm
Digital unit 3-axis HEIDENHAIN ND 780
Speed 40-2000 RPM
Feed (stepless) 5-500 mm/min
Rapid feed 1200 mm/min
Stroke quill 60 mm
Table surface 210x600 mm
S3v9i9
Taper in spindle ISO 40
Power 1,5 / 1,9 kW, 50 Hz
Dimension (WxDxH) incl. electric cabinet 113x142x165 cm
Weight incl. electric cabinet 775 kg
Accessories:
1 set (4 pcs.) short milling arbor ISO40, Ø 16, 22, 27, 32 mm
3 pcs. adapter sleeves ISO40 / MT1, MT2, MT3
1 pc. chuck holder L20
1 set of chucks L20
1 pc. drill ch...
Universal milling machine lid FP1 with 3 - axis - active digital display TNC 113 HEIDENHAIN and infinitely variable feed Super condition
Technical data:
ᐳᐳ year 1986 machines no. 2102-3244
ᐳᐳ Tilt Swivel turntable (or solid angle table)
ᐳᐳ speed: 40-2000 RPM
ᐳᐳ feed adjustable on 3 axes
ᐳᐳ rapid motion in 3 axes
ᐳᐳ drive power.: 1.5 / 1.9 KW
ᐳᐳ spindle brake
ᐳᐳ traverse path X/Y/Z: 300/160/340 mm
ᐳᐳ vertical milling head on spindle block 100 mm adjustable
ᐳᐳ vertical spindle and horizo...
Working travels 300x150x340mm
Universal table 600x260mm
Spindle taper 40
Spindle speeds 40-2000 rpm
Digital read-out
Vsdnwm
Misc.accessories
MARCELS MASCHINEN CH
Univ. milling machine make KNUTH type WF 1
machine. # 1C1366 Year of construction 1993
technical data:
Table clamping surface 270 x 700 mm
table movement longitudinal X 300 mm
table movement vertical Y 200 mm
table movement crosswise Z 350 mm
Spindle mounting ISA 40
8 spindle speeds horizontal 110 - 1230 rpm.
8 spindle speeds vertical 150 - 1660 rpm.
8 feeds 26 - 290 mm/min
quill travel 60 mm
vertical milling head +-45°
drive power 3,7 kW
weight approx. 900 kg
with
Bpdroy3c2p
- shaper head
- vic...
Universal tool milling machine
Make: DECKEL
Model: FP 1 Active
Built: 1984 - refurbished, repainted,
RAL7035 light grey / RAL7012 basalt grey
RAL5008 grey-blue
Mash.-No.: 2101-1067
Milling head type: 2171
Milling head number: 1086
Ensure:
12 months single-shift from delivery, on the mechanics that we have overhauled. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. Accordingly, it also corresponds to the level applicable at the time o...
Description
The machine has been partially overhauled.
Digital display
Technical data:
Working cycle of the table:
Lxppqb
Length, manually or automatically 300 or 450 mm
1 turn of the handwheel 4 mm
1 nonia pitch 2 / 100 mm
Vertical, manual or automatic 400 mm
1 turn of the handwheel 2 mm
1 Noni pitch 2 / 100 mm
Automatic feeds:
Length direction 12 - 216 mm/min
Vertical direction 6 - 108 mm/min.
Spindle cone ISO 30
Spindle speeds 60 - 1200 rpm
X/Y/Z 300/160/340 mm
Digital unit 2-axes HEIDENHAIN active-digital
Speed 40-2000 RPM
Kuow9
Feed (stepless) 5-500 mm/min
Rapid feed 1200 mm/min
Stroke quill 60 mm
Table surface 210x600 mm
Taper in spindle ISO 40
Power 1,5/1,9 kW, 50 Hz
Dimension 100x110x160 cm
Weight 770 kg
Universal milling machine Macmon M100 RE with 3 - axis digital display of Fagor super condition of training workshop
Technical data:
ᐳᐳ year 2004 machines-Nr. 2198
ᐳᐳ 3-axis digital display Fagor
ᐳᐳ solid angle table of ᐳᐳ speed: 40-2000 RPM
ᐳᐳ feed in 2 axes of 9-450 mm / min
ᐳᐳ traverse path X/Y/Z: 310/170/340 mm ᐳᐳ equipment: vertical & horizontal spindle of ᐳᐳ vertical Quill extendible - SK-40
B3ttxgd
ᐳᐳ suit system M16
ᐳᐳ weight 800 kg accessories and equipment:
ᐳᐳ 3-axis digital display...
Working travels 300x135x300mm
Table size 590x210mm
Spindle taper for collets W20
Spindle speeds 100-2000 rpm
Misc.accessories
2q7os3
MARCELS MASCHINEN CH
Stock no.: 102045
Universal tool milling machine Fabr. PRVOMAJSKA - MACMON type M 100
Fabr. # 944 year 1978
Ejjyh8jja
Technical data:
Tischlaengsbewegung X 310 mm
Spindle hole transverse movement Y 170 mm
Table vertical way Z 340 mm
Spindle carrier ISA 40
Projection 210 mm
16 spindle speeds 40-2000 RPM.
16 feeds 9-450 mm / min
vertical clamping surface 640 x 195 mm
Table size solid table mounting area 600 x 210 mm
with 4 T-grooves longitudinal
Table size solid table a total of 690 x 380 mm
Powe...
Universal milling machine brand: OPTimill
Model: MT 50
Item No.: 3336005
Condition: new machine
Procedures:
-X 580 mm
-Y-axis 200 mm
-Z axis 340 mm
standard features equipped with:
3-A digital display AP 2000
-Automatic feed in X-axis
-Milling long 16 mm
-Milling length 22 mm
-Chuck recording B-18
Bc207itq
-Chuck 3-16 mm / B 18
-Reducing sleeve MT 2 with Expeller slot
-Reducing sleeve MT 3 with Expeller slot
-Machine lamp
-Coolant system
-Control tool
-Manual
Description
Head 90° swivel
Accessories:
Digital display, vice, 4 holders, supports for horizontal machining.
Meaki
Technical data:
table 175 x 600 mm
x-path 280 mm
y-path 125 mm
z-path 225 mm
Speeds 100 - 1300 rpm
feed rate 11 - 320 mm/min
Recording ISO 30
Machine weight approx. 500 Kg
table mounting size: 190 x 710 mm
table movement x: 390/360 mm
table movement y: 150 mm
table movement z: 280 mm
spindle taper: SK 40
spindle turning speed range: 100 - 3100 rpm
carriages longitudinal: 0 - 600 mm/min
electrical connection: 380 V, ca. 1,5 kW
Mu00n8
space needed: 1400 x 1200 x 1500 mm
weight: ca. 680 kg
Mech. automatic table longitudinal feed: 10-1200 mm/min
Boflszeu0r
High-speed vertical milling head Spindle speed: 2000, 4000, 6000 rpm
Travel X / Y / Z: 300 / 125 / 350 mm
Table size W x D: 175 x 750 mm
spindle speed: 50 - 2750 rpm
Tool holder: ISO 30
Dimensions W x D x H: approx. 880 x 890 x 1510 mm
Accessories: Machine Manual
Working travels 300x135x300mm
Table size 590x210mm
Spindle taper for collets W20
Gvtgdc
Spindle speeds 100-2000 rpm
Digital read-out
Misc.accessories
MARCELS MASCHINEN CH
