Used Deckel Fp 3 L for sale (697)

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition Pgsdpfxjwbi Rbs Aa Djg DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes Poder D T U Dspfx Aa Dsgg - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown Pgedpfxeucphxj Aa Djg

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Pjdjr En Dyjpfx Aa Djgg Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Year of construction: 1989, condition: used, machine/vehicle number: 2204-1736, table mounting size: 460 x 800 mm movement x: 485 mm movement y: 385 mm movement z: 380 mm tailstock stroke: von Hand ca. 70 mm spindle turning speed range: 50 - 3150 rpm carriages continuously adjustable: 2 - 1000 mm/min rapid move: 2 m/min electrical connection: 3,7/4,4 kW space needed: 2100 x 1650 x 1730 mm weight: 1850 kg Podpfx Aaeclli Uj Dogg

Year of construction: 1983, condition: ready for operation (used), machine/vehicle number: 2810-3076, table mounting size: movement x: 560 mm movement y: 450 mm movement z: 450 mm Pedpfx Aajfnry Hs Degg tailstock stroke: 80 mm spindle taper:SK 40 spindle turning speed range: 40 - 4000 rpm carriages continuously adjustable: 2 - 2000 mm/min rapid move: 4 m/min space needed: 2000 x 2150 x 2030 mm weight: 2720 kg

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m Pgsdpfx Aaew A Apyj Deg - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet Pgsdedzqb Sepfx Aa Djg - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz Pjdpfx Aeiy Ekvea Djgg - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base Pjdpfx Aodzp T Eoa Dogg - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel KF 3 S type Copy Milling Machine Very good condition Pgodpfx Asv E Rw Sja Dog

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Pgjdpfx Aspmrpxoa Dog Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409

Year of construction: 1981, condition: used, Make cover Type FP 4 Table: dimensions 1000 x 470 mm longitudinal movement X - axis 700 mm transversal movement Y - axis 400 mm vertical movement Z - axis 450 mm projection spindle 50 450 mm Podpfx Aeihp U Dja Djgg spindle mounting ISO 40 Number of spindle speeds 18 Spindle speed range 31,5 1600 rpm Number of revolutions horizontal spindle 18 pcs. Speed range horizontal spindle 31,5 1600 rpm Weight machine 2000 kg feeds X Y Z axis 18 pcs 10 500 mm/min Accessories milling head with quill Table 1000 x 470 mm

Condition: used, tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. Pgjdpfov Dxzcox Aa Deg FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Condition: like new (used), x-travel:300 mm y-travel:220 mm Pjdpeh Ty Hkjfx Aa Djgg z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Year of construction: 1988, condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm digital readout Heidenhain 3 Achsen spindle taper SK 40 spindle turning speed range 50 - 2500 U/min Pgodpeqpl Uqofx Aa Dsg table-size 650 x 375 mm weight of the machine ca. 1,5 t dimensions ca. mm

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 Pgodpfjtqqllex Aa Djg control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Pjdpfjwwwr Ejx Aa Djgg Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1978, x-travel 300 mm y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Psdswl N R Njpfx Aa Dsgg Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC-rotary table 630 mm spindle taper SK 40 spindle turning speed range 18 - 6300 U/min Pgsdpfx Aaotqqtbe Djg control DIALOG 4 feed 2 - 3600 mm/min rapid traverse 6 m/min table load max. 485 kg quill stroke 80 mm spindle drive 9,5 kW total power requirement 20 kVA weight of the machine ca. 4,6 t dimensions 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: used, 3 axes digital display Heidenhain ND780 Cooling device Mechanical central lubrication Rigid angle table X-way 400 mm Y-way 220 mm Z-path 400 mm Speed 25 - 2500 rpm feed stepless in 3 axes Pgjdpfjbu U Nnjx Aa Djg Rapid feed in 3 axes Spindle brake Vertical milling head movable on spindle stand 150 mm Vertical quill and horizontal quill - SK 40 extendable Tightening system S20x2 Weight approx. 1400 kg

Condition: ready for operation (used), Cover FP 1 Milling machine Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Pjdpfxeuvih Ho Aa Djgg Mounting: SK 40 with tightening thread Feed X-axis: 290mm Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, table length: 790 mm, table width: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Transverse travel 400 mm Vertical travel 400 mm Pedpfx Aaewffymo Djgg Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, feed length X-axis: 485 mm, feed length Y-axis: 385 mm, feed length Z-axis: 380 mm, spindle speed (max.): 3,150 rpm, Table size 795 x 460 mm Podpfx Aaewffzks Djgg Longitudinal travel 485 mm Transverse travel 385 mm Vertical travel 380 mm Spindle travel 80 mm Spindle speed 0 - 3,150 rpm Spindle taper horizontal ISO 40 Spindle taper vertical ISO 40 Control CONTOUR 2

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, turning range C: 360°, spindle speed: 6300rpm, power: 12kW, tool positions: 40, tool holder: SK40, feed: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11, including chip conveyor and cooling lubricant system Knoll PF 50, year of manufacture: 1989. On-site inspection is possible. Pgodpfx Aajwtg Ibj Dsg