Used Deckel Fp 3 L for sale (699)

Condition: reconditioned (used), Year of construction: 1976, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 1 Isdpfxsyipmws Abcjhw Year of manufacture: 1976 – workshop inspected Machine No.: 51720/08 Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine technically corresponds to the standard at the time of manufacture.

Condition: ready for operation (used), DECKEL FP 2E tool milling machine from educational institution - Travel ranges X / Y / Z 400x200x400mm - Automatic feeds & rapid traverse in X/Z axes - Spindle speed range 40 - 2000 rpm - Tool holder ISO 40 - Vertical / horizontal milling configuration - Swivelling vertical head with quill feed - Machine with sliding head / extendable Y travel Ihodpfx Ajypltaobcsw - New control cabinet - Coolant system - Chip tray - Documentation Dimensions: LxWxH 1.5x1.6x1.8 meters / Weight 1500 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, Deckel FP 1 aktiv – 3 axes, serial number 2102 – 2433, machine overhauled by Arnold around 2010, travel X/Y/Z 300/160/340 mm, spindle speed up to 2,000 rpm, infinitely variable feed in 3 axes, Heidenhain readout, weight approx. 800 kg, accessories. Ihsdpfxoyn Efme Abcsw

Condition: ready for operation (used), functionality: fully functional, Engraving machine Deckel G1 L Iedpfoyl U Hnox Abcjhw Accessories: character set

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, input voltage: 380 V, year of last overhaul: 2013, We are offering this very well-preserved Deckel FP 1 2101 tool milling machine, year of manufacture 1981. The milling machine was fully overhauled by FPS in 2013. As part of the overhaul, the machine was also technically upgraded to achieve CE conformity. A ND780 position display was also installed. This is a compact and easy-to-operate machine, ideal for workshops or jig and fixture construction. The milling machine was previously used in the medical engineering sector for manufacturing fixtures, and has therefore accumulated only a few operating hours since the overhaul. The machine is being sold excluding any warranty. Iodoym Ulgjpfx Abcjhw Control type: FP 1 2101 Serial number: 5685 Year of manufacture: 1981 Circuit diagram: 6004 004102 Operating voltage: 380 V~ Frequency: 50 Hz Rated current: 13 A~ If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: reconditioned (used), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete credentials, including a valid phone number and email address, in order to provide an offer. Deckel FP1 AKTIV (3-axis active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment features: - Heidenhain 3-axis active digital readout, type TNC 113 - Infinitely variable feed in X, Y, and Z axes Isdpfx Aexpwfgjbcohw - Quill stroke on vertical milling head: 60 mm - Vertical milling head swivels and can be extended horizontally by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry check videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital readout overhauled - Set of wipers installed - LED indicators for digital readout replaced - Oil change - Vertical milling head newly mounted - Oil sight glass replaced Price quoted is net, ex-stock, loaded.

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed vertical/horizontal: 40 – 2,000 rpm Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Ijdsxyc Tkjpfx Abcshw Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Condition: good to very good, from training workshop Available from March 2026

Condition: excellent (used), Please read the technical specifications in full. If the machine is of interest to you as an investment, we kindly request your complete identification including a correct telephone number and email address before submitting an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travels: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Ihjdpfx Absxyc N Eecew Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z-axis: 1,200 mm/min Y-axis feed: manual Fixed angle table: 600 x 210 mm Vertical head swivels: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed back. - 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 - Stepless feed on X/Z-axis - The machine received a partial overhaul by a specialist company a few years ago. Equipment: - 2-axis digital readout HEIDENHAIN - Fixed angle table - Chip tray - Machine lamp - Machine feet Additional accessories available upon request! Condition: Good to very good from training facility Available from March 2026

Condition: ready for operation (used), A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible. Ihjdpfeycwq Djx Abcow

Condition: ready for operation (used), Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible. Iedpex Hz Rksfx Abcehw

Year of construction: 1990, condition: ready for operation (used), Offered is a Deckel FP 4 AT CNC milling machine year 1990. Control: Dialog 11. Coolant system: 70l, tool holder: SK40, tool changer: 20-fold, travels X/Y/Z: 560mm/500mm/390mm, table size X/Y: 900mm/530mm, spindle speed: up to 4000rpm, rapid traverse: 4000mm/min. Machine weight: approx. 2890kg. Tool changer defective. Viewing is possible by arrangement. Ihedpfx Ajx Dm Dusbcow

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1600mm/675mm, max. table load: 2000kg, speed: 6300rpm, feed: 10m/min, rapid traverse X: 10m/min, quill stroke: 800mm, tool holder: SK40, spindle power: 12kW. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/2300mm, weight: approx. 7000kg, control: Deckel Dialog 11. The screen and the drive modules of the X and Y axes have been replaced. The rotary axis is disconnected and defective. Documentation available. On-site inspection is possible. Iedpowzbblefx Abcehw

Year of construction: 1986, condition: ready for operation (used), A universal tool milling machine Deckel from the 1980s is available. Travel X/Y/Z: 300mm/160mm/340mm, table dimensions X/Y: 600mm/250mm, max. table load: 150kg, tool interface: SK40, speed: 2000rpm, feed rate: 1200mm/min, machine dimensions X/Y/Z: approx. 1200mm/1100mm/1500mm, weight: approx. 700kg. On-site inspection is possible. Ihodpfxjygmcws Abcjw

Condition: ready for operation (used), Year of construction: 2019, A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Ihodpfxsvf Iy Ds Abcow

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Iodpex S Edlofx Abcehw Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm Ihsdpfju Nc Twsx Abcjw table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. *

Condition: used, Year of construction: 1985, Technical details: Ihsdpeu Ndcmefx Abcew x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: good (used), Year of construction: 1987, Tool milling machine DECKEL FP 4NC, No. 2810-0564, year of manufacture 1987, table size 700 x 430 mm, travels XYZ = 500 x 500 x 600 mm, control GRUNDIG Dialog 4 Ihodjyhqtvjpfx Abcsw

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Isdporn I Rzsfx Abcjhw Technical data: x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: defective spare-parts repository (used), Defective engraving machine Deckel Ijdpfx Abow H Rdtecohw

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes Ihedex It Rxjpfx Abcew - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Year of construction: 1994, condition: excellent (used), Cover milling machine FP 2A with control Dialog 12 + vice Ihedpfefgmbdox Abcew

Condition: good (used), Year of construction: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control System, Year of Manufacture 1990, Completely Overhauled in 2014, Excellent Condition, CE Compliant! This machine comes from the training workshop of Continental. Technical Data: Year of Manufacture: 1990 Completely Overhauled: 2014 Digital Readout: Ihjdpfoyalcpox Abcew 3-axis active digital readout HEIDENHAIN TNC 113 X-Axis Travel: 500 mm Y-Axis Travel: 400 mm Z-Axis Travel: 400 mm Tool Holder: SK 40 hydraulic tool clamping DIN 2080 Milling Head Type: Vertical milling head Speed Range: 50 - 2,500 rpm, 18 steps Table Type: Swivel table Clamping Surface Table: 800 x 490 mm T-slot Size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: Heidenhain TNC 113 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, control manual, and programming examples Hand wheels Coolant system About the machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control unit. This universal milling machine is in excellent original condition, having only been used for training purposes in a facility. The control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is straightforward thanks to the tilting vertical head. The guides are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Deckel under power on-site. You will find more milling machines from renowned manufacturers on our website.

Condition: used, x-travel 500 mm y-travel 200 mm z-travel 400 mm table surface area 700 x 300 mm tool taper SK 40 - S20 feed 8 - 400 mm/ min rapid traverse in X und Z 1200 mm / min turning speeds 40 - 2000 U/min Ihedpfex Hay Dsx Abcew total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display Ihedpschfyfefx Abcew HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -