Used Deckel Fp 3 Nc for sale (691)

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, 3-axis active digital display (Heidenhain TNC113) Spindle mount: SK40 (S20x2) Travel paths: X 300 / Y 160 / Z 340mm Speed: 40 - 2000 rpm. (2 gear levels) Feed continuously adjustable The machine is in a well-maintained condition and can be inspected on site, with power on. Isdpfx Asvnrz Rjdwsht Includes extensive accessories. - Machine vice - Operating instructions / electrical circuit diagram / spare parts list - Collet set (S20x2) including SK40 collet insert - Other accessories on request.

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. The machine can be viewed under power. The machine is bought as is. No warranty. Ijdpfx Aowqdtpedwoht

Condition: good (used), For sale are various Deckel FP3 milling machines, which are all in good condition. The special feature of this machine is the clamped table, which would be swiveling, rotating or even movable. A purchase of the machine with a "normal" milling table is also possible. The machine has been cleaned and tested by us. If desired, safety devices can also be mounted for an additional charge. L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital display: 3 - axes - digital display Ihedpfxsiz T Exe Adwet travels: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual feeds & rapid traverses: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid feeds: approx. 1.5 m/min Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, functionality: fully functional, Deckel FP5CC Milling Machine Iodjrzu Stopfx Adweht Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Heidenhain Digital Display and Infinitely Variable Feed – Excellent Condition Technical Data: >> Year of manufacture: 1982 Machine No.: 2201-5598 >> Rotary-swivel tilting table (newly planed) >> Spindle speed: 25 – 2,500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head on spindle carrier adjustable by 200 mm >> Vertically and horizontally extendable quill – SK40 >> Drawbar system M16 >> Weight approx. 1,500 kg Equipment & Accessories: Ijdpfxex Ig Dxs Adweht >> 3-axis active Heidenhain TNC113 digital readout >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP3 universal milling machine in excellent condition. The machine has minimal backlash on the handwheels and all spindles move smoothly. On this newer FP3 model, the feed is infinitely variable on all three axes, and it features rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can input dimensions which the machine automatically moves to. Oil has been changed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site. The machine is available immediately.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, total length: 800 mm, table width: 460 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, warranty duration: 3 months, Equipment: documentation/manual, We are offering this fully overhauled Deckel FP4 M milling machine, year of manufacture 1985. Ihodpex Sllpsfx Adwot Manufacturer: Deckel Model: FP4 M Year: 1985 Condition: overhauled Control: TNC113 Aktiv control Optional: universal table with a clamping surface of 800mm x 370mm If you have any questions or require further information, please send us a message or give us a call.

Condition: ready for operation (used), Deckel Maho 27073757 / a Touch Panel for Deckel Maho CNC 432 control, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Isdpfx Aei D Upcsdweht

Condition: reconditioned (used), functionality: fully functional, Dear Sir or Madam, Ihsdpfx Asx Rvlqsdwet We hereby offer a Deckel FP1 milling machine, 3-axis active, retrofitted with safety features. These later-generation machines are equipped with, among other things, central lubrication, an electric coolant pump, and a brake motor. Additionally, thanks to Harting connectors, the control cabinet can be quickly and easily disconnected from the machine. The safety components are also connected to the control cabinet via these connectors, ensuring ease of handling is maintained. We provide a 12-month warranty on the retrofitted safety features, which we offer for all machine types! *The electronic spindle guard can be adjusted on multiple axes and is designed to prevent access to the working spindle as well as hazards caused by flying chips, coolant, etc.* *The electronic spindle safety cover is intended to prevent contact with the rotating stub shaft and tool clamping mechanism.* Delivery time: On request Year of manufacture: 1989-1992 Machine number: 2102-xxxx Table: Fixed angle table Travel paths: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: including 3-axis digital display with Heidenhain Active Control, coolant system, central lubrication, machine mounts, technical documentation, electronic spindle guard, electronic spindle safety cover Our service promise to you: - We are a certified master craftsman business specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we will fully or partially overhaul the selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation

Condition: good (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, For sale is a conventional milling machine of the brand Deckel and type FP1 The small size of the machine makes it ideal for fast work with a small footprint The machine is fully functional Technical data: x-path 300 mm y-path 160 mm z-path 340 mm Tool holder SK40 Speed 40-2000 rpm Conventional control Table size: 600 x 210 mm Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. 1200x1100x1600 mm Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Ihjdpfxjugv Hvo Adwot For further information or contact options, please visit our website

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines Ihsdohvz Iispfx Adwet FP1 -FP2-FP3-FP4 Single sale demand inquiries.

Condition: excellent (used), Year of construction: 1975, O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following available ex-stock: DECKEL Universal Tool Milling Machine Model: FP 2 Year of manufacture: approx. 1975 _____ Table travel: - Longitudinal (motor/manual): 390 / 400 mm - Vertical (motor/manual): 390 / 400 mm Cross slide travel (motor/manual): 190 / 200 mm Fixed angle table: 250 x 700 mm Distance from spindle to table: 400 mm Spindle overhang: approx. 165–465 mm Spindle taper: SK 40 18 spindle speeds: 40–2,000 rpm Infinitely variable feed range: 5–400 mm/min Rapid traverse: 1,200 mm/min Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 1,000 kg Accessories / Special equipment: • DECKEL universal swivel angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with independent drive • Large original DECKEL tool cabinet for storage of the above accessories and various arbors, approx. 30 collets, various milling tools, additional arbors, etc., as well as operation tools, separate electrical cabinet, coolant system Iedpfsxzk Irsx Adwsht Condition: Very good – demonstration ready, ideal for training workshops/apprenticeship use Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We always have further DECKEL FP 1 / FP 2 / FP 4 milling machines in stock, as well as accessories such as spiral milling attachments, etc.

Condition: refurbished (used), Year of construction: 1968, travel distance X-axis: 800 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill travel distance: 80 mm, total length: 1,000 mm, table width: 520 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 2,500 kg, input voltage: 400 V, workpiece weight (max.): 2,000 kg, We are offering this refurbished DECKEL FP2LB milling machine, year of manufacture 1968. Ijdpfx Asx Sdxzsdwsht Manufacturer: DECKEL Model: FP2LB Year of manufacture: 1968 Condition: refurbished Machine type: milling machine If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Deckel Maho 5100027000 Touch Panel for Deckel Maho CNC 432 control, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Ijdpfxei D Upgs Adwjht

Condition: used, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, total height: 3,200 mm, total width: 3,600 mm, total length: 4,900 mm, overall weight: 3,300 kg, Accessories: tool changer for tools coolant system coolant & oil tank hydr. Tool clamping for quick and easy tool change - horizontal / vertical sliding head for changing the active tool in the program during processing Spindle 40 SK RPMs 18-6300 rpm Volt 380 V Ihsdpfox Ni Hfox Adwot Hertz 50 Hz

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 360 mm, For sale is a Deckel FP1 with 3-axis active control system Ijdpfx Adsr H E Uijweht The machine is fully functional and will be checked, cleaned and put into stock in our incoming goods department. Technical data: Digital display 3-axis active digital readout HEIDENHAIN X-axis travel 300 mm Y-axis travel 160 mm Z-axis travel 340 mm Tool holder: SK 40 Milling head type. Vertical milling head Speed range: 40 - 2000 mm/rev Number of steps: 16 Feed X-axis 290 mm Y-axis feed 150 mm Feed Z-axis 330 mm Machine weight 650 kg Machine dimensions 1200 x 1100 x 1800 mm Accessories - Active function in X-, Y- and Z-axis - Coolant device The offer refers only to the machine without tools, this can be negotiated additionally On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 1972, Deckel FP1 tool milling machine, swiveling angular table, MK 4 spindle taper. Accessories: tailstock support, various collets. The machine is in operational condition and can be demonstrated under power by arrangement. Iodpfex Nclnex Adwoht

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Ijdpfx Aexgdr Isdwjht

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, Machine is in good condition! Ihjdpfsilg H Esx Adwjt Tool holder: SK 40 travels X/Y/Z: 500 / 200 / 400 mm speed range: (18 steps) 40 - 2000 rpm spindle stroke vertical: 60 mm spindle stroke horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 300 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg space requirement LxWxH, approx.: 1200 x 1250 x 1670 mm head swivels: 90° / 90 Equipment: - 3-axis digital display - Coolant device We would be pleased to demonstrate the machine under power on site. All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, Equipment: documentation/manual, Dear Sir or Madam, We are pleased to offer you a partially refurbished milling machine, type Deckel FP4M (K) aktiv. Thanks to its extensive features, this model stands out as a true highlight among conventional machine tools. The Deckel FP4MK has been thoroughly partially overhauled in our workshop, so it is in absolute top condition, both technically and visually, and is almost indistinguishable from a new machine in terms of geometry. We look forward to your inquiry! Delivery time: on request Spindle speed: 50 - 2,500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1,300 mm/min Drive power: 3.7 kW / 4.4 kW Travel paths X/Y/Z: 500/400/400 mm Tool holder: SK40 Clamping system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1,600 kg Table version: Fixed angle table or rotary-swivel-tilt table Additional features and accessories include: 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, machine levelling feet, technical documentation, and much more on request. Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected Ihedox Irwdspfx Adwot - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can carry out a partial or complete overhaul of the selected machine - You are free to choose the paint colour of your machine - You can optionally order additional accessories such as tooling, etc. directly - On request, we can install further accessories such as safety equipment, etc. - We are happy to take care of shipping and/or machine installation

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout AXESTA and 2 Accessory Cabinets from University Ownership, Excellent Condition Technical Data: >> Machine No.: 0494 >> 3-axis digital readout AXESTA >> Swiveling, tilting, and rotating table >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Drawbar system S20x2 >> Weight approx. 1,300 kg Accessories and Equipment: >> 3-axis digital readout AXESTA >> Coolant system >> Central lubrication system 2 accessory cabinets with tooling: collets, horizontal and vertical tool holders, clamping tools, dividing head with 3-jaw chuck, vise, tailstock, faceplate, additional small swiveling, tilting and rotating table, rotary table, tailstock, vise, and much more About the Machine: Ihsdexxzl Nspfx Adwst Offered here is a Deckel FP3 universal milling machine in excellent condition. All spindles move easily. The machine comes with 2 tool cabinets filled with accessories. Previously owned by a university. An oil change has been carried out. Mechanically and electrically tested. The digital display makes operation easier and even more precise. Take the opportunity to view and test the Deckel FP3 under power on site.

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Ihjdjihf Etopfx Adwjt Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), feed length X-axis: 400 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, For sale is a conventional milling machine of the brand Deckel and type FP2 The machine is in very good condition, has been overhauled by the Harich company (date unknown) and is ready for immediate use Technical data Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Vice and tools are NOT included in the offer, but can be offered. Ihodpfxou Ti Ako Adwjt On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,500 rpm, For sale is a Deckel Maho machining center, type DMU 50 M with path control and manual rotation axes The machine is in very good condition, fully functional and ready for immediate use. Particularly noteworthy is the possibility of working in an open cabin Technical data: Ijdpfx Adju Unh Iewoht Year of construction: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed speed: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360 ° (mechanical) Swivel range: +90/ - 15 ° (mechanical) Max. load: 200 kg Space requirement: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request Transport and loading can be organized on request, at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), For sale is a Deckel FP2 with high-speed milling head (V-belt drive with gear ratio) The machine was only used for copper & graphite processing, so it is not subjected to heavy use The machine is ready for use and fully functional A digital display can be retrofitted for an additional charge. The machine can also be sold without a milling head. Partial device NOT included Accessories available for an additional charge Tool holder: SK 40 Iedpfx Ajlz R Iwedwsht Travel paths X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Iedjuuh Sujpfx Adwjht Height: 25 cm