Tool Room Milling Machine - Universal

DECKEL FP 1

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Deckel Type: FP1 Machine number: 54.099/08 Machine type: Tool milling machine SPINDLE Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 Blsdpfx Aj Adulqjpaop WORK TABLE Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL X-axis: approx. 300 mm Y-axis: approx. 300 mm Z-axis: approx. 300 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 1,500 mm Weight: 700 kg EQUIPMENT 2-axis digital display

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm Bodju Ngrqjpfx Apaslp voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine approx.LxWxH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS TRAVEL X-axis: 400 mm Y-axis: 300 mm Z-axis: 300 mm WORK TABLE Table dimensions: 600 × 210 mm Number of T-slots: 4 T-slot width: 12 mm SPINDLE AND FEED Spindle speed: up to 2,000 rpm Feed range: 10–500 mm/min Bedpfxj Adui Ae Apajlp MACHINE DETAILS Manufacturer: Deckel Type: FP1 Machine type: Tool milling machine Dimensions (L × W × H): 1,000 × 800 × 1,500 mm Weight: 700 kg EQUIPMENT Workshop cabinet Matching accessories for the machine

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 WORK TABLE Bjdpfe Aduhlsx Apaolp Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL RANGES Travel in X-axis: approx. 300 mm Travel in Y-axis: approx. 300 mm Travel in Z-axis: approx. 300 mm MACHINE DETAILS Machine type: Tool milling machine Manufacturer: Deckel Model: FP1 Machine dimensions length: 1,000 mm Machine dimensions width: 800 mm Machine dimensions height: 1,500 mm Machine weight: 700 kg

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min Bjdpeqpl Uusfx Apaelp spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Technical data: Blsdpfxo Ahq Eke Apaop >> Machine no. 57752/08 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed for 2 axes >> Drive power: 1 / 1.5 kW >> Travel ranges X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill – SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The Deckel has very little backlash and all spindles can be moved easily. The machine has a brake motor; the control cabinet was modified by the previous owner. The BGR inspection is no longer valid. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on site while it is powered on. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Technical data: >> Machine no. 51434/08 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash, and all spindles move easily. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display. Bljdpfe Ahq A Eex Apaep

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Bledpfx Ajhakfaepajp Year: 2003 Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, This DECKEL FP1 universal tool milling machine will be auctioned off online in our industrial auction / machine auction – large warehouse clearance – tools, machines, workshop equipment, and metalworking accessories. Bjdpfxe Af Ir Ro Apajlp You can find this and many other items on our platform.

Condition: good (used), functionality: fully functional, FOR SALE: DECKEL FP1 Milling Machine Technical specifications: • Model: FP1 (Serial number: 54212/08) • Machining travels: X = 300 mm | Y = 150 mm | Z = 340 mm • Spindle: SK 40 taper • Speeds: Mechanical adjustment via a circular selector on the front panel • Power supply: 400 V / Three-phase • Weight: Approximately 750 kg Included equipment: • VISOMAT 3-axis digital display on an articulated arm • Circular rotary dividing table mounted on the table • Articulated work lamp Bljdpfxo Af Au Ns Apaop • Protective bellows for the slides, in excellent condition • Chip collection tray integrated into the machine frame Very clean used machine, slides in good condition, and ready for use.

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Bedpfx Aeyi Amwspajlp Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site. Blodpfxou Nvwve Apajp

Condition: used, Year of construction: 1984, x-travel 300 mm y-travel 160 mm z-travel 340 mm digital readout 3 Achsen HEIDENHAIN Bodezz S Duepfx Apajlp spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min quill stroke 60 mm table-size 600 x 210 mm feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min power capacity 1,6 - 2,0 kW table load 200 kg voltage 400 V weight of the machine ca. 800 kg dimensions of the machine ca. 1,15 x 1,15 x 1,65 m electric cabinet 0,60 x 0,35 x 0,90 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serialä-No.: 2102-2445 - 3-axis active digital display HEIDENHAIN TNC 116 - Rapid traverse - Machine light

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Blodpfjx Uw S Hex Apajp Spindle mount: D1-8 Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) with thread cutting function

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Ladies and Gentlemen, We hereby offer a Deckel FP1 3-axis active milling machine with retrofitted safety devices. These machines of the newer version have, among other things, central lubrication, an electric coolant pump and a brake motor. In addition, the control cabinet can be disconnected from the machine in no time at all thanks to the Harting plug. This type of connector is also used to connect the safety components to the control cabinet, so that handling is not compromised in any way. The retrofitted safety devices, which we can offer for every machine type, come with a 12-month guarantee! The electronic spindle guard can be adjusted in several axes and is designed to prevent interference with the working spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cap is designed to prevent interference with the rotating stub shaft and tool clamping. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: rigid angular table Travel: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1,9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min Equipment and accessories: Coolant device, central lubrication, manual, machine feet, electronic spindle protection, electronic spindle protection cap Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation Bledpfxjuw Uu Ne Apaep