Used Deckel Fp 4 A for sale (691)

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet Fodpfx Aajiy Ekvsbopn space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2783, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2783. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - Automatic central greasing - machine books Fodpfxop Sqyuo Aabepn Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways disambled, checked and are in excellent condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, Year of construction: 1980, x-travel 300 mm Fpodow A Ap Hepfx Aabsn y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, turning range C: 360°, spindle speed: 6300rpm, power: 12kW, tool positions: 40, tool holder: SK40, feed: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11, including chip conveyor and cooling lubricant system Knoll PF 50, year of manufacture: 1989. On-site inspection is possible. Fpsdpfx Aajwtg Ibobsn

Condition: good (used), DECKEL - FP2 with New Three-Axis Digital Display from Educational Institution -Well-maintained original condition -Traverse paths X/Y/Z 400x200x400mm -Digital display 3 axes "NEW" -Angle table - clamping surface 700x350mm -Speed range 40-2000 rpm -Automatic feed in all three axes -Rapid traverse in all three axes -Tool holder ISO 40 -Vertical - horizontal milling device -Vertical head swiveling with boring quill -Cooling unit -Spindle nut X-axis "NEW" -Machine feet -Machine vice "RÖHM" -Various tool holders Fpsdpfjwtbq Dsx Aabjn -Chip tray / machine base -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500Kg Errors and input mistakes excepted

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet Fpedpfx Aowwwr Esabon

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of construction: approx. 1967 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 2100 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed adjustment via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head 60 mm - Fixed angle table - Separate control cabinet beside the machine Fodpfxjghtvao Aabjpn Required space (L x W x H): 1100 x 1100 x 1600 mm Weight: 650 kg Good condition

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Fodpfx Asf E Ilzoabopn Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW Fpsdpfow A Apyjx Aabsn weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1600mm/675mm, max. table load: 2000kg, speed: 6300rpm, feed: 10m/min, rapid traverse X: 10m/min, quill stroke: 800mm, tool holder: SK40, spindle power: 12kW. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/2300mm, weight: approx. 7000kg, control: Deckel Dialog 11. The screen and the drive modules of the X and Y axes have been replaced. The rotary axis is disconnected and defective. Documentation available. On-site inspection is possible. Fsdpfewzbbljx Aabspn

Condition: good (used), Tool Milling Machine DECKEL FP 1 -Travel X/Y/Z 245x150x340 mm -Rigid angle table 600x210 mm -Tool holder MK 4 -Collet chuck, incl. collet set -Speed range 95-1900 rpm / 12 steps -Feeds X & Z axis -Horizontal / vertical milling attachment -Quill movement – vertical milling head approx. 60 mm -Vertical milling head swivels +/- 90 degrees -Machine feet Fpedpsw I Ty Ssfx Aabon -Various tools, see photos -Documentation Dimensions: LxWxH 1.1x0.9x1.7 meters / Weight 650 kg Errors and omissions excepted.

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: Fpjdpfx Aaorn I Rzeben x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base Fsdpfx Aasv R E Rdjbjpn - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: good (used), Friedrich Deckel FP 2 LB Toolroom Milling Machine The accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is characterized by its extremely stable base frame and is designed as a traveling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for the direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as those found in American V8 engines. The long travel of 800 mm is also advantageous in this application. Technical Specifications: Fpjdpfjgyw S Tox Aabjn Deckel Universal Milling Machine FP 2 LB Digital Display: 3-Axis Digital Display Heidenhain X-Axis Travel: 800 mm Y-Axis Travel: 300 mm Z-Axis Travel: 400 mm Tool Holder: SK 40, Drawbar Thread S 20 x 2 Milling Head Type: Vertical Milling Head Speed Range: 40 - 2000 rpm Number of Steps: 18 Table Type: Universal Swivel/Tilt Table (± 45° / ± 15°) Table Clamping Area: 1000 x 520 mm T-Slot Size: 16 mm Vise 160 mm Power Consumption: 9.5 kVA Weight: Approx. 1900 kg Dimensions: Approx. 1570 x 1675 x 1850 Other Items - New and Used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. Fpedpfx Aajhhuf Hebjn - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Year of construction: 2019, condition: ready for operation (used), A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Fedpfx Aaovf Iy Debjpn

Condition: good (used), Tool milling machines DECKEL FP1 - Travel paths X/Y/Z 245-150-340mm - Without vertical head / Machine was only used for horizontal milling work - Speed range 95-1900 rpm - Built-in rotary table - Automatic feeds X & Y axis - Various collets - Documentation Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight 650Kg Fpjdpfx Aaewpruxsben Mistakes / input errors excepted

Condition: excellent (used), Digital display Travel range X/Y/Z: 400 x 200 x 400 mm Table size 700 x 330 mm Tool holder ISO 40 Fpsdpfx Aewn Td Eeabon Hydraulic vice Completely overhauled in 2019

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 34338 Year of construction approx. 1965 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.0 and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gear stages - Feed in the X- and Z-axis - Coolant device with mechanical pump in the machine base - Pinol displacement on the vertical milling head 60 mm - Pivoting, rotating and tilting angled table - Adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Fedpfxeic R I Re Aabspn weight 690 kg good condition

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Fodpfxjpmrpxj Aabepn Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409

Condition: good (used), Year of construction: 1999, operating hours: 52,964 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain MillPlus, spindle speed (max.): 12,000 rpm, No reserve price - guaranteed sale at the highest bid! Fjdpfx Aaownbqgsbepn TECHNICAL DETAILS X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Control: Heidenhain MillPlus Table Table length: 1,100 mm Table width: 650 mm Table load: max. 800 kg Feed rate X-axis: 20,000 mm/min Y-axis: 20,000 mm/min Z-axis: 20,000 mm/min Spindle Spindle mount: 40 ISO / BT / MK Spindle power: 15 kW Speed: max. 12,000 rpm Tool changer Number of tools: 24 Number of controlled axes: 3 MACHINE DETAILS Length: 3,400 mm Width: 2,400 mm Height: 2,800 mm Weight: 8,700 kg EQUIPMENT - 4th axis - Chip conveyor - Coolant system - Control cabinet

Condition: reconditioned (used), Year of construction: 1987, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1987 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Fpsdpshtrd Iofx Aabsn Mach. no.: 2102-3429 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating instructions - Used as seen -

Condition: good (used), Tool Milling Machine DECKEL FP 1 with 3-Axis Active Digital Readout TNC 113 from educational institution - Travel X/Y/Z 300x160x340 mm - Speed range 40-2000 rpm - Infinitely variable feed on all three axes - Rapid traverse on all three axes - Vertical head adjustable by 100 mm Fsdew Rbxnopfx Aabepn - Vertical and horizontal milling setup - Tool holder ISO 40 - Drive power 1.5 / 1.9 kW - Fixed angle table - Chip tray - Coolant system - Work light - Documentation Dimensions: LxWxH 1.3x1.2x1.7 meters / Weight 900 kg Errors and omissions excepted.

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Fpjdpfx Aasdzp T Eoben Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Fpodpfxopn Rgvo Aabsn Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.