Used Deckel Fp 4 At for sale (683)

Condition: new, Year of construction: 2026, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate Rcedpfjh R S Tcsx Airoh 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school! Technical data: >> Machine No. 1847 >> Swivel-tilting table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional cost, the machine can be equipped with a new digital display from K&C. Redpo Agn Inefx Airech

Condition: ready for operation (used), DECKEL FP 2LB, including a 3-axis digital display, from a university, in well-maintained original condition. Rodpfx Aozbi I Eeirjch - 3-axis digital display "ACURITE" - Travel distances X/Y/Z: 795x300x400mm - Automatic feeds (18 speeds) / rapid traverses in all 3 axes - Spindle speed range: 40 - 2000 RPM (18 speed levels) - Vertical/horizontal milling capability - Swiveling vertical head with drilling quill - ISO 40 tool holder - Table surface (angular table): 1000x440mm - Table clamping surface with additional table: 1000x770mm - Coolant system - Various tool holders - Machine light - Documentation Dimensions: L x W x H: 2.5 x 2.4 x 1.8 meters / Weight: 2200 kg Errors and omissions excepted.

Condition: ready for operation (used), Tool milling machine DECKEL FP 2 LB incl. 3-axis digital control (ACU-RITE) -Travel ranges X/Y/Z 795x300x400mm Rjdpfxszu Nhwo Airjch -Automatic longitudinal / transverse / planar feeds -Rapid traverse in all three axes -Spindle speeds 40 - 2000 rpm -Table clamping area 1000x440mm -Tilting table -Digital display, 3-axis (ACU-RITE) -Vertical - horizontal milling attachment -Vertical head with drilling quill -Tool holder ISO 40 -Coolant system -Machine lamp -Various tool holders -Machine documentation Dimensions: L x W x H 2.5 x 2.3 x 1.8 meters / Weight 2200 kg Errors and omissions excepted.

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Rsdpfxou Dm E Ho Airjch Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: used, Offered: Universal milling machine. Equipped with: Vertical milling head, overarm, machine table, manual adjustment and clamping elements and vertical machine guideway with bellows cover. Inspection possible by arrangement. Rcodpfxo Agwqzj Airoh

Condition: used, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, overall weight: 1,800 kg, DECKEL FP3 L MILLING MACHINE Rodpfx Aoz Ak Axsirech X-axis travel: 800 mm Y-axis travel: 300 mm Column travel: 200 mm Z-axis travel: 400 mm Spindle speed: 25 - 2,000 rpm Motor power: 4 kW Feed rate: 5 - 500 mm/min Rapid traverse rate: 1.5 m/min Work table: 1,000 x 700 mm Tool holder: SK40 Weight: 1.8 t Heidenhain optical scales

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Redpfxjy I Adhs Airsch

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer: Deckel Redpfx Aie Adz Tzjroch Type: FP3NC Year of manufacture: 1984 Condition: Defective MACHINE DETAILS Dimensions (L × W × H): 200 × 1,500 × 2,000 mm Weight: 1,000 kg

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Rcjdpfx As Agn Rxsirsh Accessories and equipment: >> Coolant system >> Brake motor About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been performed. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, Year of construction: 1990, TECHNICAL DETAILS Travel ranges X-axis: 800 mm Y-axis: 550 mm Z-axis: 500 mm Work table Table size: 1,000 × 630 mm Feed rate and rapid traverse Feed rate range: 0–10,000 mm/min Rapid traverse: 10 m/min Spindle and tool holder Tool holder: ISO 40 Speed range: 20–4,000 rpm Main drive: 10 kW Control system CNC control: Dialog 11 Performance data Total power consumption: 15 kW Machine weight: approx. 6,500 kg Dimensions Space requirement: approx. 3.0 × 2.5 × 2.0 m Overhaul and modernization Overhaul: 2010 by FPS Redpfx Aez S I D Deirech Modernization: 2010 by FPS EQUIPMENT Splash guard cabin Tool changer with 30 positions Dialog 11 control

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 33064, Year of manufacture approx. 1960, overhauled in 2012 Travel distances: X: 300 mm, Y: 150 mm, Z: 330 mm Table size: 600 x 210 mm Spindle mount: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power connection: 380 Volts, 50 Hz - Feed in the X and Y axes - Quill movement on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Adjacent control cabinet with cable plug connection Space required L x W x H: 1100 x 900 x 1600 mm Rcodpfodzp T Esx Airsh Weight: approx. 900 kg Good condition Machine was overhauled in 2012.

Condition: reconditioned (used), Tool milling machine: Deckel Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometrical overhaul in 2026 Technical data: Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 min-1 Feed rates: (18) 8 - 400 mm/min Head swiveling: 180° Rodpjzcdarsfx Airoch Equipment: - Geometry report - 3-axis digital display, new - Spindle protection device with limit switch, new - Machine light, new - Horizontal and vertical spindle - Fixed angle table - Coolant system - Chip tray

Year of construction: 1990, condition: good (used), Various collet chucks and holders, approximately 300 pieces. For DECKEL milling machines Rcodpshvz Iisfx Airsh FP1 - FP2 - FP3 - FP4 Individual sales upon request.

Condition: defective spare-parts repository (used), functionality: not functional, machine/vehicle number: 2823-3039, type of input current: three-phase, input voltage: 380 V, Universal tool milling machine Deckel FP 5 A with Deckel Dialog 11 control (DEFECTIVE) The machine is defective and is sold in its current condition. Type FP5A, No. 2823-3039, serial no. 27613. Rcjdpfx Aiez A Uh Asroh Connection: 3 x 380 V, 50/60 Hz, rated current 33 A, control voltage 42/48 V and 24 V, maximum fuse rating 50 A. Fully enclosed work area with sliding doors, T-slot table, vertical milling spindle, telescopic guards, coolant supply, electronic handwheel on the control panel. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; disassembly and loading by arrangement. All information without guarantee.

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Rcjdpoziny Iofx Airsh Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Rcsdpfx Ao Agbypjireh Technical data: >> Machine no. 1114 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal spindle - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be easily moved. All bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Rcodpfjq A Icqsx Airsh

Condition: good (used), functionality: fully functional, FP1 Milling Machine – Fully functional with extensive accessories For sale is an FP1 milling machine, fully functional and with a wide range of accessories. Rsdez Ingispfx Airsch The accessories include, among other things: Tool cabinet Dividing head Vise/Vises Various collets Various tools and other accessories The machine is sold including the accessories shown in the pictures or that are available. Condition: used, fully functional Inspection: possible by arrangement. Please feel free to contact us if you have any questions.

Condition: ready for operation (used), Tool milling machine DECKEL FP 1 incl. dividing head -Travel distances X/Y/Z: 245x150x340mm -Without vertical head / machine was only used for horizontal milling operations -Spindle speed range: 95 - 1900 rpm -Dividing head -Automatic feed in X & Y axis -Various collets / tool holders Rcjdoza Uf Tepfx Airsh -Documentation Dimensions: L x W x H: 1.1 x 0.9 x 1.6 meters / Weight: 600 kg Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual Rsdpfjx A Eddsx Airsch - used, as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Rcedpfx Aisx S Edljrjh Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: not inspected (used), Please see technical details on photo. Rodpshvzxzofx Airoch

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,335 h, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS TRAVEL RANGES X-axis: 1,040 mm Y-axis: 600 mm Z-axis: 500 mm WORK TABLE Table surface: 1,250 × 600 mm Table load: max. 600 kg SPINDLE AND TOOL HOLDER Tool holder: SK 40 Spindle speed: 1–8,000 min⁻¹ Spindle torque S1/S6: 140/200 Nm Spindle motor power at 100/40 % duty cycle: 13/19 kW FEEDS AND RAPID TRAVERSES Feed rate range: max. 40,000 mm/min Rapid traverse X- and Z-axis: max. 70 m/min Rapid traverse Y-axis: max. 40 m/min TOOL CHANGER Tool positions: 30 Tool diameter: max. 100 mm Tool diameter with free adjacent positions: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg COOLANT SUPPLY Internal coolant supply through the spindle: 20 bar OPERATING HOURS Power-on hours: 70,278 h Spindle hours: 23,335 h MACHINE DETAILS MACHINE DATA Machine type: Vertical machining center Manufacturer: Deckel-Maho DMG Type: DMC 104 V linear Year of manufacture: 2005 Control type: CNC Control: Heidenhain iTNC 530 Total power consumption: 39 kVA Machine weight: approx. 8,900 kg EQUIPMENT CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in the Y- and Z-axis Preparation for measuring probe 30-position tool changer Rotoclear Production package 2 Internal coolant supply through the spindle Coolant system with paper band filter Blow-through air through the spindle center, selectable via M-function Chip conveyor Machine bed flushing Rsdpfx Aezqcuceirech Linear drive in the X-axis Operating mode 4 for program testing with extended manual intervention Machine documentation

Condition: used, machine/vehicle number: 2806-0743, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Rsdpfx As Aa A Hnsirjch Travel distances X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Spindle quill travel: 80 mm Work table Table clamping area: 1,000 × 550 mm Spindle and tool holder Spindle speed: 0–5,000 rpm Tool holder: SK 40 Feed rate and rapid traverse Feed rate: 2–6,000 mm/min Rapid traverse: 6.0 m/min Performance data Total power consumption: 12 kW Machine weight: approx. 3.9 t Dimensions Length: 2,200 mm Width: 2,800 mm Height: 2,400 mm EQUIPMENT No information on accessories available.