Used Deep Frying Facility for sale (3,417)

Condition: new, functionality: fully functional, power: 245 kW (333.11 HP), fuel type: hybrid, color: other, Year of construction: 2025, Equipment: cabin, onboard computer, CONSTMACH Stationary-160 is a fully automatic concrete plant developed for high-volume and long-term ready-mix concrete production projects. With a production capacity of 160 m³/hour, this plant stands out for its robust construction, high efficiency, and suitability for continuous operation. Thanks to its twin-shaft mixer with a 4 m³ wet concrete capacity, it guarantees homogeneous mixing and high-strength concrete production. Manufactured in compliance with CE standards, the Stationary-160 offers users safe and high-quality production. Cement silos, which can be customized for specific projects, are available with capacities ranging from 100 tons to 500 tons. Furthermore, if cement is supplied in bags, the filling process is conveniently carried out with the integrated bursting bunker. The plant can be equipped with insulated panels and hot steam generators for cold climate regions, while in hot regions, it is supported by cooling systems to maintain concrete quality. Aggregate pre-feeding systems enable efficient material transfer without the need for a ramp. The advanced automation system is equipped with SIEMENS & SCHNEIDER electronic components, and the entire production process is fully automatically controlled via user-friendly software. Fixed-160 Fixed Concrete Plant Technical Specifications Production Capacity: 160 m³/h Weight: 66 tons (excluding silo) Total Motor Power: 260 kW Electrical Requirement: 350 kVA Mixer Type: Twin-Shaft Mixer Required Area: 800 m² Aggregate Storage Bunker: 4 x 40 m³ Aggregate Weighing Bunker: 6 m³ Aggregate Belts: 1,200 mm wide Mixer Volume: 4 m³ wet concrete Cement Weighing: 2,400 kg Water Weighing: 1,200 liters Additive Weighing: 100 liters Compressor: 1,000 liters, 11 kW Cement Silo: 100–500 tons Control Type: Fully Automatic Why Should You Choose the CONSTMACH SABIT-160 Concrete Batch Plant? CONSTMACH Fixed-160 is the most reliable solution for professional concrete producers with its durability, high production capacity, and advanced automation system. Thanks to its modular structure that can adapt to different climatic conditions, it offers optimal performance in all kinds of sites. Its long-lasting components, low maintenance cost, and easy operation advantage ensure you get the maximum return on your investment. Moreover, with spare parts supply, technical support, and engineering consultancy offered under the CONSTMACH guarantee, the Stationary-160 is not just a production facility but a long-term business partner. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Bedpfxexpglcj Abzsdi

Condition: used, Year of construction: 2017, functionality: unexamined, 🏭 YCM DCV4030B-5AF (Double Column Type) Technical Specifications Specification Description Model DCV4030B-5AF X-Axis Travel (mm) 4065 Y-Axis Travel (mm) 3500 Z-Axis Travel (mm) 1016 Spindle Speed (rpm) 10,000 Tool Magazine Capacity (optional) 40T (optional 60T / 120T) Table Load Capacity (kg) 20,000 Machine Weight (kg) 60,000 ⚙️ Standard Accessories and Features YCM-designed High-Performance / High-Speed 5-Axis Indexing Head HSK-A100 Spindle Taper – 10,000 rpm Spindle and Gearbox Cooling System (air conditioner + oil cooler) Spindle Motor Power: 43 kW (58 HP) High Torque: 188 Nm Head Indexing Angle: 5° (optional 1°) Head Swing / Rotation Range: Tilt ±110°, Rotation ±180° Bdjdjxcnk Tepfx Abzsi Spindle Air Curtain – prevents moisture and dust ingress Automatic Tool Changer (ATC): 40-tool arm type (optional 60T / 120T) Foot Pedal for Tool Unclamping Rapid Traverse Rates (X/Y/Z): 20 / 20 / 15 m/min Cutting Feedrate: 10,000 mm/min High-rigidity Meehanite Cast-Iron Structure, designed for heavy-duty and high-speed cutting X-Axis: 3 sets of IKO Roller Linear Guideways (each with 5 blocks) Y-Axis: 3 sets of angularly adjusted IKO Roller Guideways Z-Axis: Built-in Box-Type Guideway Hydraulic Counterbalance System for Z-axis Bridge and Column: One-piece casting design Table: Heavy-duty design for deep-cut machining 🧠 Control System Control: FANUC 200FB (Option 1 & Option 2 included) Display: 15.1” TFT LCD color screen High-speed machining block processing time: 0.5 ms Look-ahead function: 5000 blocks Option 1: 4-axis simultaneous machining + tool plane setting Option 2: 5-axis simultaneous machining + tool plane setting TCPM (Tool Center Point Management) DCM (Collision Detection / Prevention System) Kinematic Compensation: Automatic via Cycle 451 Kinematic Calibration Ball: Ø 20 mm Hard Disk: 32 GB + Ethernet connectivity Mouse Pad Function Mold Package (for die & mold applications) Smart NC: 3D graphic display and full graphical conversational programming Rigid Tapping (Tapping without Floating Holder) Helical Interpolation 🧰 Lubrication, Cooling & Safety Systems Piston-Type Automatic Centralized Lubrication System Anti-Crash Protection during Power Failure Wash-down Gun for cleaning chips and interior Air-Blow System for Cutting Tool Cooling MPG (Manual Pulse Generator) Handwheel Screw-Type Chip Conveyor Electrical Cabinet Cooling System Automatic Separation System for slideway oil and coolant

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system Bdodpsxryafefx Abzoi • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, For customers only from the Baltic countries: Lithuania, Latvia, Estonia. The CIDAN RAPIDO guillotine is a fast and reliable metal cutting machine. Depending on the length of the processed metal, guillotines of different working lengths are offered: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Cutting thickness: 3.5 - 1.5 mm. The guillotine can perform up to 35 cuts per minute. The drive system with eccentrics, the lowering bars for holding the cut sheet and the system that presses the material during cutting are installed only 2.5 cm from the knives, which allows you to easily, quickly and conveniently cut narrow strips. RAPIDO guillotine shears have corner supports on both sides of the table, ensuring that the material is fed into the machine at a right angle, and LED cutting zone lighting, thanks to which you will clearly see the cutting line. Backrest and control system CUTLINK Bedpfxowd Ebzo Abzjdi CUTLINK is a fast, reliable and easy-to-use program that allows you to simultaneously enter up to 10 different operations. The backrest automatically adjusts itself according to the entered parameters. As standard, the guillotine is equipped with a 750 mm deep backrest, but if necessary, a 1000 mm backrest can be selected as an option. Sheet support and return To achieve maximum control, the back sheet support is pneumatically controlled. This allows you to adjust the sheet feed speed depending on the type of material being processed. After cutting, the sheet support lowers the material into the return carriage (forward return). If necessary, the sheet return function can also be selected as an option. If you have any further questions, we will always be happy to consult you by phone or invite you to inspect the machine live.

Condition: good (used), For sale: robust German industrial washing machine from the renowned brand Miele, model WS 5141 EL. This unit is designed for intensive use in commercial laundries, hotels, hospitals, or production facilities. It is equipped with an automatic detergent dosing system and a high-performance heating unit with a power output of 15 kW. - Technical specifications: • Model: Miele WS 5141 EL • Type: Industrial washing machine, freestanding • Power supply: 3N~ 380–415V / 50–60Hz • Heating power: 15 kW • Power consumption: 15.4 kW • Load capacity: up to 14 kg • Spin speed: up to 1000 rpm • Drum: Ø 590 mm x 512 mm • Weight: approx. 380 kg • Electronic controls with programmer and automatic dosing • Protection class: IP X4 • PC / programming interface - Technical condition: • Fully operational unit • Ready for connection – complete • Dosing system requires a refill for container no. 2 (message displayed on the screen) • Inspection valid until 2025 (Miele service sticker) • Recently decommissioned from an industrial line - Applications: Ideal for: • Commercial laundries • Industrial facilities • Care homes / hospitals • Hotels and guesthouses • Cleaning companies - Why is it worth it? Premium-class German-made machine – extremely durable construction, perfect for intensive operation. Instead of investing in a new one for PLN 20,000–25,000 net, save a substantial amount while maintaining Miele’s renowned quality and reliability. - Included: • Miele WS 5141 EL washing machine • Cabinet with dosing installation (as shown in the photos) • All connection hoses and cables Bdsdpfxjw Hhvmj Abzoi

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Bsdpfxoxqyumj Abzsdi Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: new, functionality: fully functional, power: 205 kW (278.72 HP), color: other, Year of construction: 2025, Equipment: cabin, CONSTMACH Stationary-120 concrete plant is a fully automated production facility specially developed for high-volume and long-term concrete production projects. With a production capacity of 120 m³ per hour, this system can produce all types of concrete with high precision. Its durable structure, minimal maintenance requirements, and trouble-free performance make it one of the most preferred stationary concrete plant models among professional users. Thanks to its twin-shaft mixer with a 3 m³ wet concrete capacity, homogeneous mix quality is guaranteed. The Stationary-120 model can be adapted to project requirements with different cement silo options ranging from 100 tons to 500 tons. When using bagged cement, it is easily loaded into the cement silos thanks to the integrated blasting bunker. Equipped with heating systems for cold climates and cooling units for hot regions, this plant delivers maximum performance in all geographical conditions. Furthermore, it simplifies site layout by eliminating the need for a feed ramp with its aggregate pre-feeding systems. It is equipped with advanced SIEMENS & SCHNEIDER brand electronic components, a powerful PLC automation system, and user-friendly control software. This allows operators to safely and efficiently manage the entire production process from a single screen. Stationary-120 - Stationary Concrete Plant Technical Specifications Production Capacity: 120 m³/h Weight: 58 tons (excluding cement silo) Total Motor Power: 205 kW Electric Generator Requirement: 300 kVA Mixer Type: Twin-Shaft Mixer Working Area: 700 m² Aggregate Storage Bunker: 4 x 30 m³ Aggregate Weighing Bunker: 4.5 m³ Aggregate Transfer Belt: 1,000 x 26,500 mm Mixer Wet Concrete Volume: 3 m³ Cement Weighing Bunker: 1,800 kg Water Weighing Bin: 1,000 liters Bdsdpfx Absxpgb Dezsi Additive Weighing Bin: 100 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: 100 – 500 tons Control Type: Fully Automatic Why Should You Choose the Fixed 120 | Fixed Concrete Plant? CONSTMACH Fixed 120 is one of the most reliable solutions in the industry with its high production capacity, durable structure, and advanced automation technology. It shortens your investment payback period thanks to its long-lasting components, low energy consumption, and quick maintenance advantage. Its design suitable for all weather conditions, world-standard components, and after-sales technical support guarantee ensure your projects run smoothly. The FIXED 120 concrete plant, manufactured with the CONSTMACH difference, is the right choice for professionals seeking maximum efficiency and quality. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 2023, condition: new, CAT988 Marble Fork, Bucket and Quick Coupler Bedpfspa Rb Isx Abzodi Loader marble attachments are specialized tools designed to fit on loaders to handle, lift, and transport marble blocks safely and efficiently. These attachments are optimized to comfortably carry buckets, forks and quick coupler according to marble's weight. Their design ensures minimal damage to the marble while providing stability during transport and operations. These attachments are essential in quarries and processing facilities where large marble blocks are frequently moved.

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Bsdpfx Aexlngaobzjdi Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: excellent (used), Overhead travelling crane + STAHL ST2010 hoist • Lifting capacity 2000 kg • Length 10.42 m For sale: a complete and fully functional overhead travelling crane with a high-quality STAHL ST2010 chain hoist, offering a lifting capacity of up to 2000 kg. The set is pre-owned but in very good technical condition. ✅ Technical specifications: * Type: Single-girder overhead travelling crane * Beam length: 1042 cm (10.42 m) Bsdswcq Epopfx Abzsdi * Lifting capacity: 2000 kg * Hoist: STAHL ST2010 – proven, reputable unit * Power supply and cable management along the entire runway * Stable steel construction – ideal for production facilities or industrial workshops

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Bdsdpfx Aoxqyt Ajbzoi Price: Upon request

Year of construction: 2023, condition: new, A scrap magnet for excavator is an electromagnet that is specially designed with very deep magnetic field for sorting out and transporting metal scraps in a junkyard. There is no need to install any extra generator and hydraulic installation on the machine. So you can get rid of the extra hoses and can move the excavator easily Explore the GALEN's new magnet system for detailed information please contact us Bodpfjphnygox Abzedi

Condition: used, Separation wall 2000 x 2200 with 3 levels of filtration, filtration area 2000 x 1000. Working area 1 meter deep with recessed lighting IP65, and a table for storage. Fan NEXT 211 1.1 kW ATEX explosion-proof, max 4500 m3/h mounted on top of the wall. Starter start/stop, and duct connection unit with shock absorber to the outside. Stand is good. Can be viewed in Vilnius. If you have more questions, we will be happy to answer. Bsdpfjvuqg Ssx Abzedi

Condition: excellent (used), Year of construction: 2008, Arburg 470S 1100-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping Unit: Clamping force: 110 t Tie bar distance: 470x470 mm Platen size: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Euromap 67 Robot interface 2 x air valve 1 x hydraulic core pull Control system with 8 hot runner zones Hardened injection unit – Bimetallic Proportional valve on injection unit – precise injection Conveyor belt integrated with machine control Built-in sorting flap Screw diameter can be changed Bdsdpfjxqyqnox Abzei Wittmann W711 robot Year of manufacture: 2008 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; C axis – pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel Robot with adapter Robot purchase available at extra cost Dimensions: Weight: 5200 kg Length/Width/Height: 4.56x1.52x2.13 m All machines offered will be started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 2023, condition: new, Attachment suited for: Hoisting equipment Selling price: € 15.500, US$ 16.480 Bdodpfoph Rk Tjx Abzji A scrap magnet for excavator is an electromagnet that is specially designed with very deep magnetic field for sorting out and transporting metal scraps in a junkyard. There is no need to install any extra generator and hydraulic installation on the machine. So you can get rid of the extra hoses and can move the excavator easily Explore the GALEN's new magnet system for detailed information please contact us

Condition: used, functionality: fully functional, Year of construction: 2012, For sale: Electric Overhead Travelling Crane 10 T (AT-101, 2012) Condition: Very good, well-maintained, and technically sound. Reliable electric overhead travelling crane (Electric Hoist Type AT-101) designed for lifting and transporting heavy loads in manufacturing and storage facilities. Technical specifications: Model: Electric Hoist Type AT-101 Lifting capacity: 10 tons Lifting height: 12 m Lifting speed: 8 m/min Travel speed: 20 m/min Bsdoxm Tr Dspfx Abzodi Power supply: 380 V Duty cycle: 25% ED (short-term periodic duty) Year of manufacture: 2012 Application: Electric overhead travelling crane designed for lifting, transporting, and positioning heavy loads, equipment, or metal blanks. Suitable for use in: - manufacturing workshops, - mechanical repair shops, - warehouses and logistics centers, - metal processing lines. If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Bdjdsxqymijpfx Abzoi Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 2022, condition: new, Attachment suited for: Construction machines VERACHTERT 600L poliepgrijper orange peel grapple MATERIAL HANDLING EQUIPMENT ORANGE PEEL GRAPPLE / all types 0.3m3 to7m3 Robust design, lifting capacity and efficiency put GALEN Orange Peel Grapples on top of the pile in scrap handling and recycling. The grapple's four hydraulic tines penetrate deep into scrap piles and grab tight to move the maximum possible material in every pass. This grapple provides superior productivity and efficiency for material handling operators. Bodpfjn Tm Dxjx Abzjdi 0.3m3 to 7m3 all types we manufacture The model on the picture is Hitachi ZX380 Capacity: 0.6m^3

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Bedpfx Absxqylxjzjdi Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: used, Field of application: Construction Bodpfephqrpjx Abzedi CAT988 Marble Fork, Bucket and Quick Coupler Loader marble attachments are specialized tools designed to fit on loaders to handle, lift, and transport marble blocks safely and efficiently. These attachments are optimized to comfortably carry buckets, forks and quick coupler according to marble's weight. Their design ensures minimal damage to the marble while providing stability during transport and operations. These attachments are essential in quarries and processing facilities where large marble blocks are frequently moved.

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX PolySet Year of manufacture: 2010 Injection unit: Screw diameter: 40 mm Injection weight: 228 g Injection pressure: 2500 bar Dosing volume: 251 cc Clamping unit: Clamping force: 130 t Type distance: 470 x 470 mm Clamping platen size: 745 x 770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core puller x 1 Air core puller x 6 Control system with hot runners x 18 Injection unit hardened - bimetal Proportional valve on the injection unit for precise injection Dimensions: Weight: 9000 kg Bdodoxqylfepfx Abzsi Length/Width/Height: 4.90 x 1.60 x 2.10 m All machines offered are tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Bodpfx Abexqyflszodi Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Arburg 370H 600-100 / Hybrid Machine Year of manufacture: November 2011 Injection unit: Screw diameter: 20 mm Injection weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 cc Clamping unit: Clamping force: 60 t Type distance: 370 x 370 mm Clamping platen size: 510 x 510 mm Ejector: electric Clamping unit: toggle-type Bedpfx Asxqyb Hebzjdi Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 1 Control system with hot runners x 12 Hardened injection unit - bimetal Main machine motor - servo motor driven by an inverter - energy saving The injection unit is driven by the servo motor Driven by an inverter Machine with cylinder/battery with compressed nitrogen (additional charging for fast work) Central lubrication Dimensions: Weight: 3190 kg Length/Width/Height: 3.68 x 1.45 x 2.04 m All offered machines are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface 2x air valves 1x hydraulic core pull Bdsdpfjxqx Thsx Abzoi Hot runner control Injection unit hardened - bimetallic Proportional valve on the injection unit – precise injection Screw diameter change possible Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Engel Victory 500/80 Tech / Production Line with Engel Viper 12 Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 45 mm Shot weight: approx. 295 g Injection pressure: 1,598 bar Dosage volume: 318 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface 3x hydraulic core pull Injection unit hardened - bimetallic Robot Engel Viper 12 Year of manufacture: 2014 5-axis robot: 4 axes driven by servo motors (electric); Axis A - pneumatic Touch control panel Bjdpfoxqx Ncsx Abzsdi Robot with adapter and protective housing with part separator Robot available for purchase at additional cost Dimensions: Weight: 5,300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pump/motor: 15 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request