Used Deep Hole for sale (4,293)

Condition: used, Year of construction: 2001, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: HZPUI-T2300, feed length X-axis: 10,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 30,000 mm, ram adjustment: 10,000 mm, installation height: 54,000 mm, total width: 80,000 mm, total length: 90,000 mm, drop-through hole in table: 32,000 mm, input voltage: 380 V, overall weight: 5,400 kg, DGUV certified until: 08/2026, control voltage: 380 V, product height (max.): 5,000 mm, year of last overhaul: 2025, sheet thickness steel (max.): 2,000 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 3,000 mm, Equipment: 4th hydraulic function, SchulerUsed German Schuler hydraulic press, model HZPUI-T-2300/1700, manufactured in 2001. Nominal force 23000kN (2300 ton), bolster size 4600×2500 mm, total weight 540 ton, power 1600kW, HLP46 hydraulic oil. Heavy duty for automotive panel, deep drawing. Cedpfx Afo Afapkozehd

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Container No. G0123024_1 – Manufacturer: Kögel. * Sliding roof tarpaulin * Double corner fittings * Insert strip (wood) * Outline marking, side/rear * Load certificate, Code-XL * Multi-hole strip Chedpe Agd Hwjfx Afzsd * Portal door with double rotating rod locks (inside) * Side sliding tarpaulin * Forklift drivable * Fixed support legs * Device for rail loading * Lashing options * Perforated pallet stop strip Roof tarpaulin used. Financing available upon request. Financing possible. Delivery time: IMMEDIATELY AVAILABLE. Multi-Lock outer frame. Tarpaulin used. Technically ready for use without further repairs. Substructure with signs of use. Valid UVV certification. UVV documents available. Exchangeable container with lettering (see photos). LASI CODE XL!!! Multiple units available! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 980 mm, 20 x lashing eyes per 6 t, 20 x lashing brackets per 6 t, 18 x lashing holes, 7 x stanchion pockets, centered, 14 x stanchion pockets in the outer frame, 2 pairs of container locks, surcharge for bulkhead approx. 1.600 mm high, pluggable Price: 1,500 ¤ , Surcharge for extendable drawbar Price: 1,500 ¤ , Surcharge for 4 x warning signs with lighting Price: 800 ¤ , , Also available in loading area length 9,000 mm or 10,500 mm! , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Cjdpe Agfn Nsfx Afzshd

Condition: used, empty load weight: 3,900 kg, maximum load weight: 8,000 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 47 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, At the front, it has portal doors for drive-through loading, at the rear, it also has portal doors, a 27 mm screen-printed floor, 5 rows of aluminum V-stringers, 7 pairs of lashing eyes on the loading platform, an outer frame with lashing holes, a loading height of approximately 1,050 mm, contour marking according to ECE R 048, and at the front, 2 geared winch supports with 2 gears. BPW axles. Cjdpfx Ao Agt Eysfzshd -- Subject to printing errors, errors and changes, sample images --. More data can be found at: ! More Details: !

Condition: used, Milling cutters for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Marked ‘MAN’ or ‘BG-Test’ for manual feed. Chjdj Afvbvepfx Afzod Technical data: - Blade: Various - Hole diameter: Various - Length: 123 mm - Material: Steel

Condition: used, mileage: 1,50,000 km, power: 132 kW (179.47 HP), first registration: 06/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 15 m³, loading space length: 4,080 mm, loading space width: 1,900 mm, loading space height: 1,950 mm, Equipment: air conditioning, central locking, soot filter, Equipment: Power steering * Partition wall * Central locking Air conditioning: Air conditioner Wheelbase: 3000 mm Trailer: BE Maxicargo Internal dimensions: L 4.08 m, W 1.90 m, H 1.95 m Payload: 1,540 kg Cooling system: Carrier Pulsor 400 deep-freeze unit CARRIER Pulsor 400 Chsdps Ahpkcefx Afzed * Bodywork by KLEGE * Air conditioner * Cruise control * Hi-Matic automatic transmission (8-speed) * Twin tires on rear axle (2nd axle) * AL-KO axles * Brake assist * 3 seats * Radio/CD/AUX/USB * Bluetooth hands-free system * Multifunction steering wheel * Rear-view camera * Acoustic reversing warning system * Work lights * Roof spoiler * Electric windows * Electrically adjustable and heated exterior mirrors * Wheelbase 3000 mm * Technical gross weight 7,000 kg Vehicle and trailer are in good condition!

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Csdpfx Afof Dlzuezehd Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 60 W, laser wavelength: 1,070 nm, type of cooling: air, warranty duration: 12 months, shaft length: 1,070 mm, Equipment: cabin, Laser engraving machine with 60-watt laser power (new) - 60-watt MOPA laser (enables color laser engraving on stainless steel) Cjdpfx Ajfkgq Nefzohd - incl. 4th axis (rotary unit) - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - very easy to operate - switch on and start - Fiber laser source with 60 watts for high-contrast and fast markings with extremely high resolution (see images) - Deep engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g., for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600mm (l x w x h) - Clamping surface with fastening threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approx. 180 x 180mm - expandable to approx. 300 x 300mm - incl. foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to commercial businesses. Delivery / Consulting / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. Chodpfx Asfz D Etofzod - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 2025, condition: new, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Cjdpfefz D E Nox Afzohd Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: new, Year of construction: 2025, Model 2025 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! Cjdpfx Afeg H Tn Ijzohd We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Chsdpfeiiyppjx Afzod Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: used, Stanzkraft: 550 kN (e.g. punches holes 30 mm in 16 mm material), with locating device via foot pedal to anchoring Cuts 350 x 13 mm or 230 mm on the flat bar shear Csdpfxjt Expre Afzshd Overhang: 305 mm Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on punching side Assortment of tools is included in the price

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), fuel type: diesel, empty load weight: 3,650 kg, Year of construction: 2015, operating hours: 5,180 h, Equipment: gripper hydraulics, Mini excavator TEREX TC 37 Codpfe Agu Emex Afzshd Year of manufacture: 2015 According to the meter: 5,180 hours 3,650 KG 22 kW Mitsubishi engine - POWERTILT - Quick coupler MS 03 - Used ditching bucket - New deep excavation bucket! - All hoses on the arm - NEW TRACKS!! - Cabin with heater - Work lights - Ready for immediate use! - Previous owner was a gardening and landscaping company Selling price: 21,900.00 EUR net Affordable delivery also possible!

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Chsdswkpxkjpfx Afzsd - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: excellent (used), overall weight: 75 kg, Anvil 75 kg Length 600 mm Width of hammer face 120 mm Length of hammer face 400 mm Height 260 mm Csdpfxj Agw Tvo Afzshd Width 250 mm Square hole diameter 24 mm

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Codpfo Agwvmjx Afzohd Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: good (used), functionality: fully functional, power: 17 kW (23.11 HP), fuel type: diesel, empty load weight: 2,920 kg, Year of construction: 2016, operating hours: 4,046 h, Equipment: cabin, gripper hydraulics, hammer hydraulics, Mini excavator TEREX TC 29 (identical to Schaeff) Year of manufacture: 2016 According to the meter: 4,046 hours 2,920 kg 17.5 kW - Quick coupler MS 03 - All hoses - Hydraulic ditching bucket - Deep excavation bucket - Cabin with heating - Work lights Cedpo Agwy Ujfx Afzehd - Immobilizer - Central lubrication system - Ready for immediate use - Good tracks - Well-maintained machine - Includes CE certificate and all other documents Selling price: €17,500 net Affordable delivery also possible!

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 17.980 mm Number of bays / shelf row: 06 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 07x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) Chsdpem Nchnofx Afzsd 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 36x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load 72x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x heavy duty dowel, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 14x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Chodpfxju Hf Rys Afzsd Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing Codpfx Afsup Skwszehd is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Condition: good (used), Year of construction: 2016, functionality: fully functional, turning length: 669 mm, turning diameter: 330 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 762 mm, bar passage: 75 mm, CNC control Sinumerik 828D 12-fold revolver Sauter VDI40 driven tools C-axis 3-jaw chuck and collet chuck device Tool Eye part catcher chip conveyor tail stock coolant device with high pressure pump bar loading device Iemca Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 600 mm max. Drehdurchmesser / max. turning diameter 330 mm max. Drehlänge / max. turning length 669 mm X-Weg / X-travel 260 mm Z-Weg / Z-travel 762 mm Drehzahl / spindle speed 3400 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes max. Stangendurchmesser / max. bar diameter 75 mm Eilgang X / rapid feed X 20 m/min Eilgang Z / rapid feed Z 24 m/min. Chodpfsyt Hp Dex Afzjd Gewicht der Maschine ca. / weight ca. 5700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Carbide teeth ✅ 420 ccm ✅ 230mm ✅ Shipping possible SCHORR STUMP GRINDER RR150BSF Clear your garden of unwanted tree stumps - quickly, efficiently and effortlessly with our powerful stump grinder. The simple and clean solution for a well-kept and beautiful property! -- 420cc petrol engine with 12.4 HP -- Precision milling head with 8 carbide teeth -- With parking brake -- With transport handles -- High user-friendliness -- Super compact design - easy to store -- Extremely robust and reliable EQUIPMENT / FEATURES PRECISE MILLING HEAD The RR150BSF stump grinder has 8 carbide cutting teeth, which are ideally suited for particularly demanding tasks. The cutter enables fast and precise work, even on hard or petrified stumps. Removing the tree stump with our cutter means no more tedious reworking. This saves both time and money on large and small projects. POWERFUL PERFORMANCE The efficient and powerful 420 cc four-stroke engine delivers 12.4 hp and provides enough power to effectively remove even large and deep tree stumps. The engine is particularly powerful and, in combination with the centrifugal clutch, offers constant power output. SIMPLE OPERATION With ergonomically designed controls and intuitive controls, the stump grinder is easy to operate, even for users without extensive experience. Thanks to the two tubeless main wheels and the transport handle on the mudguard, the stump grinder can be easily transported to its destination. The parking brake also makes it easier to operate the tiller during work. Cedjt Ivnwepfx Afzshd ENORMOUS TIME SAVING Compared to conventional removal methods (exposing the root, cutting the root, loosening the stump, removing the stump), using the cutter - and all with just a spade - saves you an enormous amount of time and energy. For a tree stump with a diameter of 30 cm, people with the appropriate experience and physical strength may need 4 to 8 hours; with the cutter, the work is easily done in 30 to 180 minutes. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR150BSF Number of cutting teeth: 8 (4 double teeth) Max. Milling depth / milling height: -2300mm / +2540mm Max. Max. rotation speed: 2500 rpm Own weight: 113kg Basic dimensions Overall length: 1710mm Overall width: 750mm Total height: 1160mm Cutting tooth dimensions L x W x H: 108mm x 71mm x 38mm motor Displacement: 420ccm Power max: 9,1kW / 12,4PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR BAUMSTUMPFFRÄSE RR150BSF. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a stump grinder too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us:

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, turning diameter: 330 mm, center width: 650 mm, 3-jaw chuck tool holder device tail stock Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Chedpfowtx A Dex Afzjd Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Year of construction: 2026, CORMAK Z5050 Floor Drill Press – Heavy-Duty Industrial Metal Drilling Machine The CORMAK Z5050 floor drill press is a robust and precise industrial metal drilling machine designed for professional applications requiring high performance, accuracy, and reliability. Thanks to its wide speed range, tapping capability, and four-stage automatic spindle feed, the machine is ideal for drilling large-diameter holes in structural materials. Its solid construction and optimized ergonomics make the CORMAK Z5050 an excellent investment for long-term productivity and safe operation. Main Advantages of the Machine High machining capacity – maximum drilling diameter of 50 mm and tapping capacity up to M22 in steel provide a wide range of applications. Drilling machine with tapping function – right/left spindle rotation and four spindle feed rates (0.1–0.4 mm/rev) ensure precise and stable thread machining. Automatic spindle feed – enables efficient drilling operations without continuous manual operator intervention. Very wide speed range – 18 spindle speeds from 55 to 1450 rpm allow precise adjustment of parameters according to the processed material. Rotary worktable – ±45° tilting range and a large 580 × 580 mm surface allow angled drilling without removing the workpiece. Cooling system and work light – provide comfort, accuracy, and reliable operation even during extended machining processes. Design and Technology The CORMAK Z5050 column drill press has been designed for maximum stability and high torque performance. The spindle is mounted in a Morse taper MK5 and features a large 210 mm quill travel, enabling deep drilling and tapping operations. The 190 mm diameter column and rigid cast iron base effectively reduce vibrations and ensure precise machining. A clear control layout, readable feed indicator, and intuitive speed adjustment system make machine operation quick, safe, and convenient. Precision and Working Efficiency Thanks to its optimized gear transmission system and powerful 2.2 / 3 kW motor (960 / 1440 rpm), the CORMAK Z5050 metal drilling machine provides efficient torque transfer to the spindle, allowing drilling in demanding and high-strength steel grades. The integrated cooling system with a dedicated 75 W pump helps maintain high surface quality, reduces tool wear, and extends the service life of cutting tools. Standard Equipment Drill chuck 1–13 mm Morse reduction sleeves – 3 pcs. (for MK5) Cooling system with pump Work light Technical Specifications Parameter Value Maximum drilling diameter 50 mm Tapping capacity (steel / cast iron) M22 / M24 Chsdpfx Asridynjfzed Spindle taper MK5 Spindle travel 210 mm Number of speeds 18 Spindle speed range 55–1450 rpm Number of spindle feed stages 4 Feed rates 0.1 / 0.2 / 0.3 / 0.4 mm/rev Column diameter 190 mm Spindle-to-column distance 370 mm Spindle-to-table distance 80–800 mm Spindle-to-base distance 1325 mm Table tilt angle ±45° Worktable dimensions 580 × 580 mm Base dimensions 860 × 580 mm T-slot width 2 × 18 mm Main motor power 2.2 / 3 kW Motor speed 960 / 1440 rpm Coolant pump power 75 W Overall dimensions 1050 × 590 × 2150 mm Net / gross weight 760 / 860 kg