Used Hole Puncher for sale (3,334)

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons Pedpfx Aijium Stjrsrc - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Podpfoy E Twaox Airsrc Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Prodpfx Aiozf Nk Torjc Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, Year of construction: 2007, puncher 55 t square edge steel 40 mm Prsdpfx Aez St Risiroc round bar steel 40 mm L-beam 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.) Ø 40 x 10 mm shear: flat material 300 x 15 mm throat 250 mm work stroke 60 mm work height max. 1085 mm total power requirement 4,0 kW weight 1300 kg range L-W-H 2000 x 900 x 1800 mm Equipment: - Electro-hydraulic structural steel shears with 4 workstations * Flat steel shears * Structural steel shears * Punch press * Notching station - Driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at the hole-punching

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC Prodpfx Aijztyxdsroc CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Prjdpfx Aiox Ehg Torjc

Condition: used, Year of construction: 1975, Number of spindles: 20 Predpfxey E Hfkj Airoc Drill spacing: 32 mm Power consumption: 1.8 kW

Condition: new, Year of construction: 2025, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 196130, resolution (max.): 2,400 dpi, paper weight (min.): 52 g/m², paper weight (max.): 350 g/m², Equipment: auto duplex, For sale: Fujifilm Apeos Pro C650 We are offering a new and fully functional Fujifilm Apeos Pro C650. Included with the machine: Fujifilm Apeos Pro C650 Finisher with 2/4-hole puncher PostScript 3 kit Transport unit Power cable Key specifications: Print speed: up to 65 pages per minute Resolution: exceptionally sharp 2,400 × 2,400 dpi thanks to Fujifilm’s LED printhead technology Paper weight: supports a wide range of media from 52 to 350 gsm Paper capacity: up to 7,360 sheets Prodpjzxy H Eofx Airoc Serial number Apeos Pro C650: 196130 The machine can be picked up at our location in the Netherlands. Please feel free to contact us for more information or to place a bid.

Condition: excellent (used), Year of construction: 2015, total height: 2,500 mm, total length: 2,300 mm, total width: 2,600 mm, overall weight: 4,000 kg, ARKU EdgeRacer ER 1500 D – Double-Sided Deburring and Edge Rounding Machine The ARKU EdgeRacer ER 1500 D is a high-performance industrial machine designed for automatic deburring and edge rounding of sheet metal components. The machine processes both the upper and lower sides of metal parts simultaneously in a single pass, significantly reducing production time and manual finishing work. What is this machine used for? Removing sharp edges and burrs from laser-cut, plasma-cut and punched metal parts. Rounding internal and external edges for improved safety and surface quality. Preparing sheet metal components for painting, powder coating and further processing. Improving edge quality for welding and assembly. Processing steel, stainless steel and aluminium components. Finishing complex sheet metal parts with holes, slots and internal contours. Who is this machine interesting for? Laser cutting companies – Finishing laser-cut sheet metal parts quickly and efficiently. Sheet metal fabrication companies – Automatic deburring and edge rounding in production. Steel service centres – Processing large quantities of cut metal components. Stainless steel manufacturers – Producing smooth, safe edges on stainless steel parts. Automotive suppliers – Finishing precision sheet metal components. Machine builders – Preparing metal parts for assembly, welding and coating. Electrical cabinet manufacturers – Removing sharp edges from panels and enclosures. Subcontractors – Providing professional deburring services to industrial customers. Main advantages The major advantage of the EdgeRacer ER 1500 D is its double-sided processing technology. Unlike conventional deburring machines, which often require components to be turned over and processed twice, the EdgeRacer finishes both sides in one operation. With a working width of 1,500 mm, the machine is particularly interesting for companies processing medium to large sheet metal components. Typical industries: Sheet metal fabrication, laser cutting, automotive, machinery manufacturing, metal construction, stainless steel processing and industrial subcontracting. Pedpfxo Agvlao Airsrc Conclusion: The ARKU EdgeRacer ER 1500 D is especially attractive for professional sheet metal manufacturers looking to reduce manual labour, increase production capacity and achieve consistent, high-quality edge rounding on both sides of their components. Length:2300mm Width:2600mm Height:2500mm Weight:4000kg

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Prodpfx Ajz Nkuteiroc Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T Predsy Udrmjpfx Airsc If you have any further questions, please do not hesitate to ask.

Condition: excellent (used), Year of construction: 1996, completely overhauled in 2005 Number of spindles: 2 Drilling capacity/spindle, steel: 1-6 mm Prsdpfxsy Eykge Airsc Drilling depth: max. 350 mm Z-axis travel: 350 mm X-axis travel: 350 mm Drive power/spindle - 100% duty cycle 3.7 kW - 50% duty cycle 5.5 kW Spindle speed: 3,000 - 27,000 rpm Spindle shank: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow: 48 l/min Coolant capacity: 1,000 l Compact band filter High-pressure pump Accessories included: - 29 drill bushes - Drill bush holder - Clamping cone holders - Clamping cones - Drill chuck Optional accessories - €3,500 - 137 drills - List available in PDF

Condition: good (used), travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 200 kg, table width: 300 mm, overall weight: 800 kg, type of input current: three-phase, table length: 600 mm, workpiece length (max.): 400 mm, Fast-Hole EDM Brand: Tecnosystem Model: D3-DM FAGOR 3-Axis NV 300E Coordinate Display Travel: - X-axis: 350mm - Y-axis: 250mm - Z-axis: 350mm Electrode rotation speed: 200 rpm Head travel: 200mm Prjdpfoz Dt Ukjx Airec Table dimensions: 600x300mm Maximum workpiece weight: 200kg Dielectric fluid capacity: 200L Drilling capacity: Drill/electrode diameters from 0.3mm to 6.3mm. Maximum electrode length: 400mm Weight: 800kg The Tecnosystem D3-CM is a fast-hole EDM machine (or EDM drilling machine/super-drilling machine). In machining workshops, it is commonly used as auxiliary equipment for wire cutting to create the initial holes through which the cutting wire is subsequently passed. Function: Fast drilling using an electric arc on conductive materials (hardened steels, etc.) using rotating tubular electrodes made of brass or copper. Key applications: Drilling threading holes for EDM wire, extracting broken taps, and creating small cooling or ejection holes in molds and dies. System: High-pressure injection of dielectric fluid through the tubular electrode.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand finishing machine, the “Canon Multifunction Pro Puncher B1” Item for sale: 1 x Canon Multifunction Pro Puncher B1 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. Prsdpfez Aqy Rex Airec For further information, please feel free to contact us directly.

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Defective – PLC controller missing. Podpfx Aozmxf Aoirjrc

Condition: good (used), Year of construction: 1987, machine/vehicle number: 287, Offer 26239 Technical data: - Pressing force: 250 kN - Max. sheet thickness: 10 mm Pjdpoz R Siisfx Airjrc - Max. punch size / punching diameter: 105 mm - Stroke, continuously adjustable: 0 - 40 mm - Overhang: 750 mm - Highest stroke rate: 150 strokes/min - Installation height: 200 mm - Drive: 400 V / 8.2 kVA - Space requirement: approx. W 4200 x H 1700 x D 1700 mm - Weight: approx. 3200 kg - Including: - Stop table, left and right, each with X-axis travel of 2000 mm - Y-axis travel: 500 mm - Quick-change tool system for punches - Foot pedal; emergency stop button - Extensive range of accessories, various tool holders - Punches and dies

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Pjdpfx Ajz H Dwnsirjrc Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 350 mm, type of input current: three-phase, Sarix SX200HPM with integrated divider. Prodoz I R Tfspfx Airsc

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Podpfxjz Il Rrs Airerc Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: used, Year of construction: 1983, machine/vehicle number: 508323, 21-spindle, pitch 32 mm Tool holder M 10 external thread Spindle spacing max. 640 mm Portal clearance max. 1056 mm Stop length 2500 mm with 4 pivoting stops Drilling unit with 2.2 kW motor Drilling head swiveling, drilling from below Height adjustment max. 80 mm Drilling depth max. 80 mm Pjdodardxjpfx Airorc Ex works, from Seevetal location, as inspected Subject to prior sale

Year of construction: 2026, operating hours: 36 h, condition: used, functionality: fully functional, Product weight 2-500g, power220V/1P/50HZ, 0.6KW, Speed50-150pcs/min, machinesize: L1240*W535*H1130mm, SUS304,Weight 95kg The equipment can accurately divide the dough/pastry into evenly sized small dosages, which is suitable for the productionof variouspasta, and the divided dosage will be automatically beaten into the required shape, which has high production speed and high production efficiency. Hopper Material: 304 stainless steel 1. Food standard 2. The hopper is suitable for many kinds of fillings like dry filling, scattered filling and other fillings with poor liquidity. It is more anti-corrosion and stable. Enjoy a long life. Cutter and safety cover Features: 1. Easy to take apart and control product length. 2. Does not stick dough. 3. All the material which can touch food we also use healthy materials. 4. Can make different shapes by changing nozzles. 5. High-quality nozzle material. Used, in good condition, still under 1-year warranty from the manufacturer. Selling due to the factory closure. More videos & photos on request. Pedpfezx D Dbjx Airorc

Condition: good (used), Year of construction: 1983, Pitch 32 mm Prjdpjzfqk Ijfx Airoc Motor output 1,8 kW Weight 240 kg Number of boring spindles 21 St.

Year of construction: 1980, condition: ready for operation (used), Ayen Type DB 1000 K 23 Year of manufacture 1980 Prsdopgkqpjpfx Airoc GS-tested number of spindles 23 pieces number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic Hole line drilling device

Condition: used, Year of construction: 1984, Used Machine Year of Manufacture: 1984 Features and Technical Specifications: Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gear motor: 2.2 kW with 21 spindles Spindle pitch: 32 mm Podpfx Aezk Nuveirorc with built-in oil damping Height adjustment: 80 mm Drilling depth: 80 mm Dimensions: 140x88x160 Weight: 420 kg

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges The machine has been comprehensively overhauled and modernized. Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Z1: 500 mm A-axis: +/- 20° Pedpfx Aijz Ntr Ierorc Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Spindle drive power at 60%: 20.5 kW Express travel X/Y/Z: 15.000 mm/min Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg