Used Demag Ac 155 for sale (532)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Ijdex D Hnmepfx Amyeib Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/

Condition: used, Year of construction: 2000, Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing system Utilities: Compressed air, electrical supply Scope of Delivery Depalletizing crane system | DEMAG | Manual layer depalletizing with air-cushion gripping system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot fill Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Feed tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger based heating system Carton erecting system | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton forming unit Carton sealing system | BORTOLIN |  Hot melt carton sealing Glue system | Nordson | Series 3400 | Hot melt unit Conveyor systems | Various transport conveyors Iiedpfx Amsy Rmfbjyjb

Condition: used, Year of construction: 2002, Additional title: Slewing crane Maximum load: 2000 kg Iedpfx Amjxykvmoyeib Reach: 4 m Height: 4,61 m

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Iijdpfx Asy N D E Aemysb Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Iodpjx Ex R Esfx Amyeib

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Iodpfx Amsy N R U Roysib Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute 1x Euromap 12/67 conversion Iiodoy N R Uqjpfx Amyob 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190

Condition: used, Year of construction: 2014, (1) Injection molding machine, Handling: Sepro Robotique | Success 22 | 2016 Temperature control: GWK Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, 1x Conveyor Unit, manufacturer Somos FG 204; year of manufacture 2022 Technical details: Clamping force (kN): 2100 Tie bar distance (mm): 580 Injection unit: 430 Power supply: 3/400 V Frequency (Hz): 50 Current 1 (A): 175 Current 2 (A): 116 Current 3 (A): 59 Weight (t): 8.93 Pressure (bar): 190 Iiodey N R R Eopfx Amysb

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Wittmann | W621 | 2003 Temperature control: HB Therm | HB-100 Z1 | 2013 Miscellaneous: 1x Protective Enclosure 1x Conveyor belt 1x Hot Runner Controller, Mold Masters 1x Conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 189 Current 2 (A): 152 Current 3 (A): 37 Weight (t): 10.1 Pressure (bar): 190 Flow rate (l/min): 206 Iiodpsy N R Iqofx Amyob

Condition: good (used), Year of construction: 2008, clamping force: 500 kN, Demag Systec 50/370-120 (2008) Screw size: 18 mm tie bar distance: 370x370mm Iodey Eyq Hspfx Amyoib machine is in good working condition immediately available at our warehouse.

Condition: ready for operation (used), Year of construction: 2002, clamping force: 4,200 kN, screw diameter: 70 mm, Hydraulic injection moulding machine manufactured in 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mold height of 1530 mm. It has a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG 420/810 - 2300 machine we have for sale. Contact us for further details. • Tie bar spacing (W × H): 810 × 710 mm • Magnetic clamping: No • Min. platen size (W × H): 380 • Min. mold height: 820 mm • Max. mold height: 1530 mm • Max. distance between platens: 1530 • Max. weight of moving mold half: 2200 kg • Centering ring diameter/height: 160 × 15 • Sprue bushing radius: R19 • Ejector coupling thread diameter: M24 Iodpfsy Nyfljx Amyeib • Shot volume: 1090 cm³ • Hot runners: 8 • Cascades air (number): 6 • Cascades hydraulics (number): 6 • Hydraulic core pulls: 2 • Capacity oil fillings: 730 • Power supply: 217 A • Power input: 127.5 kW Additional equipment • Robot: Demag, year of manufacture 2002

Condition: used, Year of construction: 1978, arm length 5500 mm weight max. in kg 250 kg height 3800 mm Lifting height 3800 mm Crane number 1.30 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Iodeyqvlispfx Amyoib If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), DEMAG Chain Hoist Model PK 5 Load Capacity 1000 kg Lifting Height 4 meters Iisdjy I Ulkjpfx Amysb Lifting Speed 7.5 meters/min. Overall Length 700 mm 380 Volt 1.4 kW Year of Manufacture 1967 Condition is very good, only occasionally used. Can be tested on site. Transport Dimensions: Length 700 mm Width 400 mm Height 320 mm Weight 60 kg

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Iijdpfxsyz Sd De Amyeb Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: excellent (used), functionality: fully functional, lifting height: 2,000 mm, load capacity: 1,500 kg, For sale: Demag slewing crane with chain hoist, column height 286 cm, jib length from slewing pin 320 cm. Ijdpfjymv T Ssx Amyeib

Condition: ready for operation (used), Year of construction: 2001, clamping force: 3,000 kN, overall weight: 13,900 kg, This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details. Iiodpfx Aey Iciksmyob • Max. Hydraulic Pressure: 190 bar • Max. Flow Rate: 164 l/min • Total Amperage: 181 A • Heating Amperage: 102 A • Drive Amperage: 79 A • Control Amperage: 67 A • Operation Voltage: 400 V • Frequency: 50 Hz • Certification: CE

Condition: excellent (used), For sale: Professional lifting set: DEMAG chain hoist + VETTER travelling beam – complete kit High-quality German-made equipment, designed for industrial use. TECHNICAL DATA: Lifting capacity: 2000 kg (2 tons) Beam length: approx. 242 cm Hoist manufacturer: DEMAG Beam manufacturer: VETTER Fördertechnik Power supply: 400V, 3 phases, 50 Hz Year of manufacture: 1997 Lifting speeds: 2-speed (slow + fast) Control: pendant remote (up/down + STOP) Chain: original, in good condition Trolley: manual (moves along the beam) DEMAG hoists are known for their industrial durability and reliability. SET INCLUDES: ✔ DEMAG chain hoist ✔ VETTER travelling beam (approx. 2.4 m) ✔ Manual trolley Iiodpfjy A Tgcex Amyob ✔ Control pendant (remote) ✔ Wiring ✔ Safety hook TECHNICAL CONDITION: unit in working order normal signs of use ready for operation without additional investment APPLICATIONS: workshops warehouses production halls service stations assembly work

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons Distance between tie bars: 475 x 475 mm 2 x core pullers on movable platten \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004) Ijdpexd Sz Eefx Amyoib

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7143-1001, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 1,995 bar, injection weight: 94 g, opening stroke: 400 mm, installation height: 210 mm, total length: 4,000 mm, total width: 1,400 mm, total height: 2,100 mm, overall weight: 3,400 kg, pump power: 15 W, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. Iiodpox Spw Asfx Amysb The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type PK 2 N Serial No: 2033985 Year of manufacture: 1973 Iisdpfx Amjy E T Dmoyjb Load capacity: 500 kg Hook travel: 15 meters Lifting speed: 5 m/min - 2 fall lines Good condition

Condition: good (used), 1. DEMAG drum brake Type: TH806/60 - RT315 TH806 1 piece available. 2. ELDRO electrohydraulic lifting device Ed 1250/60 Iedpsu Uvmfjfx Amyjib

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Type: Multicomponent (2K injection) Drive: Hydraulic Iodpfoyz Tmyjx Amyeib 2x hydraulic valve

Condition: used, Wall-mounted slewing crane DEMAG type KBK 2 Demag boom no.: KBK-982 040 44 Demag wall bracket no.: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Iedpfx Amstqwrvjyeib Jib length: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height lower edge of boom to upper edge of wall bracket: 1000 mm Flange plate of wall bracket to centre of pin: 270 mm Total length from flange plate of wall bracket to tip of jib: 4330 mm - Jib profile: DEMAG KBK 2 C-profile rail - Trolley for DEMAG KBK 2 C-profile rail - Original yellow paint Net weight: 170 kg Very good condition Price without chain hoist – chain hoist or crane can also be found in our shop.

Condition: excellent (used), Column-mounted slewing crane, manufacturer Demag Lifting capacity: 500 kg Jib length: 3500 mm Lifting height: 2250 mm Overall height: 3100 mm Chain hoist Demag PK 2 N Lifting speed: 5 m/min 380 Volt Weight: 515 kg Iiodpfoy Hfycex Amyeb

Condition: excellent (used), Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: 628 626 44 RIW -Dimensions: see photos Iiodpfsxc Eupox Amyob -Dimensions: Ø 310 x 40 mm -Weight: 0.9 kg