Used Demag Df 110 C for sale (506)

Condition: like new (used), screw diameter: 82 mm, Screw assembly (plasticizing unit) in 82mm Suitable for: DEMAG D430-2350 NC II + NC III machines DEMAG D400-2800 NC III DEMAG D500-2800 NC III Shot weight: 1390g = 1560ccm (D430-2350 NC II & NC III) Shot weight: 1490g = 1670ccm (D400/D500-2800 NC III) The mounting block (cooling flange) must be transferred from the old cylinder. The screw and barrel are as new (dimensions are OK) Dodpfsw A R H Tsx Afpoun Complete with RSP.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: TH20010018, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 3.2t - 3200KG, track 13300mm Outer dimensions with head carriage approx. 13500mm Crane with FU control and servo motors!!! 2x Demag DH rope hoist with floor and radio control RC-J for individual or tandem control of both hoists Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 2500mm Lifting height of rope hoist 6000mm Weight approx. 3200KG incl. 2x 25m guide rails HEB400 (400x300mm), incl. power rails!!! Beam lengths per side: 1x approx. 15m 1x approx. 10m Support spacing 10/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Very good used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Dujdpfxjv A Rr Dj Afpen Collection preferred

Year of construction: 1979, condition: used, machine/vehicle number: TH20009957, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 2.5t - 2500KG, track approx. 9000mm Outer dimensions with head carriage approx. 9200mm Demag DH rope hoist with floor control Height from top edge of crane to hook approx. 750mm Head carriage length with buffer approx. 1700mm Lifting height of rope hoist 6000mm Weight approx. 1500KG Optionally, 2x 25m guide rails HEB340 (340x300mm), including conductor rails, are also available. Beam lengths per side: Dusdpfx Afsv A Sg Nspon 1x approx. 10m 1x approx. 15m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Year of construction: 2013, condition: like new (used), machine/vehicle number: TH2000Messraum, DEMAG KBK crane canopy crane runway 9.3 x 5.3m (bridge travel distance approx. 5m) The crane is also available in other dimensions with raised chassis Payload / lifting capacity 500KG Technical data of the system: Crane runway made of Demag KBK2 rails with raised chassis - crane girder is between the two rails for maximum lifting height Duodpfsv Iai Njx Afpen with internal power supply!! System is delivered complete: KBK rails, rail connectors, undercarriages, end plates, cable carriers, holders/hangers etc. incl. Demag DK chain hoist 500KG (older) Crane is dismantled and immediately available Various cranes are available Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125KG - 1600KG Please enquire about your crane runway with load capacity and dimensions without obligation.

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Hersteller: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Dusdpfxjxhfuas Afpen Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 878 0730, clamping force: 2,500 kN, clearance between the columns: 630 mm, mold height (min.): 330 mm, ejector force: 69,000 N, ejector stroke: 200 mm, opening stroke: 675 mm, plate length: 950 mm, plate width: 950 mm, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,100 kg, heating capacity: 27 kW (36.71 HP), pressure: 190 bar, pump power: 4,500 W, power: 72 kW (97.89 HP), type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, input current: 167 A, Equipment: documentation/manual, Technical Specifications – Demag Ergotech 250/630–1450 Clamping force: 2,500 kN Tie bar spacing: 630 × 630 mm Maximum opening stroke: 675 mm Minimum mold height: 330 mm Maximum mold height (with WA): 710 / 830 mm Platen size (H×V): 950 × 950 mm Maximum mold weight: 3,300 kg Maximum weight of moving mold half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Injection volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater output (screw cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Pump unit: 37 / 45 kW Djdpfx Afew Hq Hhspoun Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Maximum current consumption: 167 A Dimensions & Weight Overall length: 6,500 mm Overall width: 1,900 mm Overall height: 2,300 mm Machine weight (net): 13,100 kg

Condition: good (used), Year of construction: 1998, Ref. no.: 17507 Hersteller: DEMAG Type: ERGOtech system 800-310 Dusdpfx Ajwm Iyfefpjn Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Duodpswm Iz Aofx Afpon Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! Djdpfx Afohwd E Njpjun International shipping costs on request!

Condition: like new (used), machine/vehicle number: DCMS, Year of construction: 2007, Demag manulift chain hoist lifting capacity : 125 kg Lifting height : 2.8m Dusdeg Stp Hepfx Afpen reeving : 1/1 lifting speed : stepless 0.15 - 30m/min version: equipped with suspension eye used in very good condition (fully checked) (new price € 3353,-) multiple DCMS hoists available

Condition: ready for operation (used), functionality: fully functional, overall weight: 5,000 kg, total length: 7,860 mm, total width: 2,900 mm, load capacity: 5,000 kg, main lifting speed: 5,000 mm/min, TECHNICAL DETAILS Hoist designation: P 35 Lifting speed: 5 m/min FEM group: 1Cm Load capacity: 5 t Rope/chain: 16 mm Y/W dimension 1: 111 mm MACHINE DETAILS Dusdpeyf Av Djfx Afpen Dimensions & weight Dimensions (L x W x H): 7,860 x 2,900 x 1,000 mm Net weight: 5,000 kg EQUIPMENT Wireless remote control Test book available Note: Crane runways are not included in the scope of delivery or sale.

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Drive: Hydraulic Dujdpfx Afjva Ht Sepen

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 5 kg X=420mm Y=1200mm Z=1500mm Duodpfx Afsyfhw Hopjn

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 5 t span width: 21000 mm stroke speed: 8,0 precise lift: 0,8 m/min rope diameter: 14 mm connected load: 10,2 kW SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 100 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 71 A2, travel speed 2,5 m/min. Size of travel wheels Ø 170mm (16 pieces) Trolley main hoist EKDH 525 H12 KV3-2/1 F10; type KBV 71 B8/2; travel speed 20,0 / 5,0 m/min.; size of travel wheels Ø 125mm (4 pieces) Hoisting gear: type KBH 125 B4; lifting height 12.000 mm; braked with displacement runner; lifting speed (main stroke 8,0 m/min. and fine stroke 0,8 m/min.) single hook size 2,5 rope Ø 14mm; rope length 28.3 m; power unit group FEM 1 AM Operation via pushbutton pendant control with DST Special feature: traversing piece with interlock and stitch tracks + infrared Dujdpfx Aou Nvg Dofpjn There are more bridge cranes with a 21-meter span for sale. *

Condition: used, Year of construction: 1978, Technical details: lifting capacity: 0,25 t height lower edge cantilever arm: 3450 mm cantilever arm length from center column: 3000 mm column diameter: 194 mm rotation: ca. 100 ° There are 3 column-mounted slewing cranes available for sale from Leipzig. ( price per piece) 2 column-mounted slewing jib cranes (No. 3 and No. 4) refurbished and 1 column-mounted slewing jib crane (No. 5) as is/is, without refurbishment. Demag-PK2 N-F hoist, 250kg lifting speed 10 m/min; fine lift 2.5 m/min. Load chain single chain; see type plate; control via pendant control, mobile manual Duodpeu Szhpjfx Afpon at column base no. 3 and no. 5 is foot plate with 580 x 580 x 20 mm and at no. 4 foot plate 400 x 400 mm beam Column i.D. *

Condition: good (used), Total height: 2960mm Lifting range: 1100-2400mm Boom length: 900mm Dsdsik E S Djpfx Afpsun

Condition: good (used), Load capacity: 500 kg Dujdpfog T Ib Hex Afpon Total length: 10m

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / All-Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 25 mm Shot weight: 39 g Injection pressure: 1580 bar Dosage volume: 44 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping system: toggle lever Control system: NC5 - touchscreen Additional equipment: All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface 4x air valve Hot runner control Hardened injection unit – bimetallic Dusdpfxoycqyxe Afpsn Central lubrication Screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 1995, operating hours: 1,22,158 h, clamping force: 3,300 kN, screw diameter: 60 mm, This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Locking force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mold weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Stroke volume: 763 ccm • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Max dosing stroke: 270 mm • Plasticizing flow: 41 g/s • Configuration/controls: • Armored (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (Yes/Yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement performed in 2017 Additional equipment Dujdpfeyg Nkwex Afpsn • Wittmann W322-121 CNC linear robot/removal device (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Dusdsyguk Ajpfx Afpjn Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7826-1082, Plastic Injection Moulding Machine | DEMAG Ergotech Extra 35-80 (350 - 80) Clamping force [kN]: 350 Dodpfeygh Rvox Afpeun Number of components: 1 Clamping plate width [mm]: 390 Clamping plate height [mm]: 390 Clear tie bar spacing horizontal [mm]: 280 Clear tie bar spacing vertical [mm]: 280 Centric ring diameter [mm]: 110 Min. mould installation height [mm]: 180 Max. mould installation height [mm]: 350 Max. opening stroke [mm]: 350 Max. ejector stroke [mm]: 100 Thread [M]: 16 Max. mould weight [kg]: 310 Max. mould weight moving platen [kg]: 150 Screw diameter [mm]: EE1:18 Max. shot weight [g] PS: EE1:20 Injection unit orientation: EE1: horizontal Equipment: 2-core pull, without robot Inspection possible any time by appointment. Free loaded on truck (Butzbach). #Tags: DEMAG | Extra35 | Extra3580

Condition: good (used), Year of construction: 2008, clamping force: 2,000 kN, screw diameter: 50 mm, Equipment: documentation/manual, Clamping Unit Clamping force: 200 tons Locking force: 220 tons Maximum opening stroke: 575 mm Minimum mould height: 340 mm Maximum mould height: 690 (790 with WA) mm Maximum daylight between platens: 1265 (1365 with WA) mm Platen size (h × v) : 860 × 860 mm Tie-bar spacing (h × v) : 580 × 580 mm Dodpfx Afoyark Tepjun Maximum mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg Hydraulic Ejector Ejector stroke: 180 mm Ejector force: 69 kN Ejector return force: 31 kN Screw diameter 50 mm L/D ratio 20 – Injection pressure (at 400 °C): 1646 bar Shot volume: 442 cm³ Shot weight (PS): 400 g Maximum screw stroke: 225 mm Maximum injection stroke: 400 mm Installed barrel heating power: 14.8 kW Hopper capacity: 70 l Type: Horizontal Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,646 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It features a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine includes a linear robot system and a 9-zone hot runner mold temperature control. Consider the opportunity to buy this DEMAG El Exis S250/630-2300 electrical injection moulding machine. Contact us for more information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 950 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Max daylight (open distance): 1505 mm • Opening stroke: 675 mm • Ejector: 200 mm stroke / 80 kN force • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ Djdpfsyftamex Afpjun • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating power: 14.8 kW • Hybrid drive power consumption: • Total installed power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Valve gate control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9‑zone hot runner integrated • Interfaces: Printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle: 2.00 s • Noise level: 74 dB(A) • Note from owner • Describes a hybrid high-speed machine with a larger injection unit (Type 2300 vs Type 840) than the referenced inventory machine above. Additional equipment • Linear robot W633-961 (axes: X=900 mm / Y=1600 mm / Z=2500 mm)

Condition: good (used), Year of construction: 1975, Crane trolley DEMAG Type:PL 168 NF Year 1975 lifting capacity 3200 KG lifting height 4 m with operating bottle in good condition. Djdpoubbr Tofx Afpoun

Year of construction: 1979, condition: good (used), Overhead Crane DEMAG Type: EKKE Year 1979 Lifting capacity 7500Kg. span width : 7500mm Hook height : 5500mm Complete with traction motors and hoisting gear from DEMAG Dsdpfjh Uqbfox Afpoun Crane documentation and test book reports, plans available with 20 meter power rail included.