Used Demag Df 110 C for sale (506)

Year of construction: 1995, condition: used, Demag crane rail KBK II length 7000 mm with ceiling mounting + electric chain hoist 125 kg but there is also the possibility for 250 kg Duodjh Dwhrjpfx Afpon

Year of construction: 2007, condition: ready for operation (used), Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible. Some machines are partially dismantled and/or defective. Dusdpswkiicefx Afpsn

Condition: ready for operation (used), Year of construction: 1993, Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mold installation height min./max.: 225mm/not specified, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On-site inspection is possible. Individual sale possible. Duodpfxjx Hz Sbe Afpen

Condition: used, Year of construction: 2006, A Demag Ergotech injection molding machine including Wittmann robot and machine housing is available. 1) Injection molding machine Demag Ergotech 50/355-200, year of construction: 2006, tie bar distance X/Y: 355mm/355mm, min. installation height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, injection weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control: CDIAS. 2) Handling robot Wittmann W721, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Cage. Documentation available. On-site inspection is possible. Dusdpfx Afewvadnjpen

Year of construction: 1972, condition: ready for operation (used), Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible. Dusdpeuzx T Refx Afpon

Condition: excellent (used), Year of construction: 1991, load capacity: 2,000 kg, Overhead Crane DEMAG - M + PK10-N-F MACH-ID 9360 Make: DEMAG Type: M + PK10-N-F Year: 1991 Motorized swiveliing 0 - 27-0 Gr Lifting capacity 2000 Kg High speed 4000 mm/Min Dodpfx Asyfd N Sjfpoun Low speed 10000 mm/Min Books / Inspection books included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), For sale: professional pneumatic turbine GTV 1000 from the renowned brand Mannesmann Demag – original, fully functional, and in excellent condition. - Technical specifications: • Rotational speed: 100,000 rpm Dsdpfx Afow Rd I Ejpsun • Power supply: compressed air (approx. 6 bar) • Air consumption: approx. 318 l/min • Spindle diameter: 30 mm • Total length: approx. 120 mm • Weight: only 210 g • Collet: 3 mm • Oil-free version – clean operation without lubrication - Why choose this? • Extremely lightweight and compact – ideal for continuous operation • German quality – precise bearings, no vibration • Perfect for deburring, micro-milling, and robotics applications • Oil-free – cleaner operation and reduced material wear

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN Dodox D Nxzspfx Afpsun

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Dedjx Sqi Hspfx Afpjun Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: used, Electric chain hoist crane DEMAG Type PM 8 - Manulift Serial No. 5319450 Year of manufacture: 1979 Load capacity: 80 kg Hook travel: 2.9 meters Dedsxcbnlopfx Afpeun Distance from suspension to load hook: 700 mm Main lifting speed: 12 m/min Precise lifting speed: 2 m/min 1 fall = 80 kg Manulift hand control directly on the crane hook Mains connection: 380 Volt, 50 Hz Weight: 20 kg in good condition

Condition: excellent (used), Year of construction: 2012, radio controlled; 2 trolley, Max. Capacity 30t; Span 14.100mm; Trolley 1.600mm; Impeller Diameter 420mm; Trolley Diameter 280mm; Nr. of Wheels 4. including, steel pillar construction, crane runway(blue color metal parts). Dujdpfolz T Nksx Afpen

Year of construction: 1983, condition: excellent (used), machine/vehicle number: WR10, Technical data: 1x Demag KBK 1 pillar jib crane NL 250KG with Demag PK1 chain hoist Payload at full radius 250KG / 0.25 tonne payload Height: approx. 3.3m UK boom: approx. 2.8m Radiance: 2.7m Duodport R Hnofx Afpsn Hook height: approx. 2.4m Complete weight approx. 600KG incl. dowel plate 80x80cm with 250KG Demag chain hoist incl. bolt, cable carrier, chassis, end cap etc. Swivel range 300°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only after appointment

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, overall weight: 3,500 kg, total length: 19,770 mm, load capacity: 5,000 kg, working height: 10,000 mm, For Sale: DEMAG Overhead Crane 5t Technical Specifications: - Overhead crane DEMAG / Terex, year of manufacture 2016 - Single-girder bridge crane / Load capacity: 5,000 kg - Model EVKE 5t / Crane span (center-to-center): 19,770 mm - Design standard: DIN EN 13001 and DIN EN 15011 - Crane power supply: Vilma CA 64 system, with Demag radio remote control - Maximum hook travel: 10 m - Crane weight: approx. 3,500 kg Condition and Collection: The crane is in very good condition and fully operational. It was replaced by a 10t crane due to increased load requirements. The crane has been dismantled and is immediately available. Shipping by freight carrier or pick-up possible. Dsdpfx Afoyhbk Sspeun Location: 9314 Steinebrunn, Switzerland

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling Dujdpfx Aox D Rqrjfpon • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2012, clamping force: 2,500 kN, screw diameter: 50 mm, injection weight: 482 g, total height: 2,400 mm, overall weight: 14,900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. • Clamping unit size: 250 • Holding force: 2750 kN • Platen size (H x V): 930 x 930 mm • Distance between tie bars (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: Standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm3/s • Metering stroke: 270 mm • Nozzle stroke (max): 110 mm • Material hopper capacity: 110 L • Electric metering drive: 13.1 kW • Cylinder heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Max drive overhang with nozzle contact: 184 mm Duodex D Nwqopfx Afpen • Max drive overhang with nozzle retraction: 1279 mm • The maximum injection weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine Depth 6600 mm

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Dodpjw Ixz Usfx Afpeun Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: used, DEMAG . 20 Euro . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Duodpfx Afoh Hvgxepen +++++

Condition: used, Year of construction: 1988, arm length 2.200 mm height of hook 2.600 mm weight of the machine ca. 1,8 t weight max. in kg 1000 kg Djdog N Di Rjpfx Afpoun +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Duodpfx Aeygk Eiofpon

Condition: excellent (used), functionality: fully functional, 2 units DEMAG trolleys, 3.2 t, complete with hoist PLV168 Very good condition, ready for immediate use 1 unit for €3,300.00 net 2 units for €6,200.00 net DEMAG slip ring motor 36/24 S4 GÜ Fine gear FG36 19K or Fine gear 72 DFg refurbished Djdswafidepfx Afpoun or Hoisting motor 36/24 K6P 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse

Year of construction: 1999, condition: good (used), Demag KBK crane sky crane runway dimensions approx 20 x 6 m Payload / lifting load 1000 KG - 1,0to Technical data of the plant: Crane runway from Demag CRC2 rails Mounting height variable, chain length about 4 m Dujdpfx Aoct Dhyefpsn System comes complete: -KBK Rails, rail connectors -Fahrwerke, End plates, cable chain, holder / hanger etc incl. double bridge with Demag chain hoist 1to Conditioning is not like the pictures seen electrically driven - no travel drives! Picture shows the same facility with 12x6m Shipping preferred possible pickup by freight Demag KBK1 KBK2 and KBK3 rails are in stock! Shipping via forwarding Truck 450 euros net within about 350 Km please inquire Other measurements or shipping prices, we will be immediately and non-binding offer!

Condition: excellent (used), DEMAG wheel drive motor 36/24 K6P for electric wire rope hoist P2000 / P1600, optionally with clutch and brake disc. Type 36/24 K6P, motor completely overhauled, in very good condition. Armature / rotor / runner, bearing end shields, clutch, and brake also available separately. Dodpfx Aev Uai Aofpeun

Year of construction: 2022, condition: new, functionality: fully functional, lifting height: 12,000 mm, main lifting speed: 6,300 mm/min, i=79, new, 2x available, with bottom block, without electrics, without DMF KBH 140 B4 + KBA 80 B4 Dujdpfx Aoq R N T Hefpon Fine input gearbox F10 Various accessories on request

Operating hours: 800 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 8,000 mm/min, Demag monorail trolley, short design, ready for immediate use, incl. overload protection and electrics, trolley wheels must be replaced, 2x available, KBH140 B2/12 Djdpsq R Rf Aofx Afpoun

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures GDR3 H12 Dusdpfovylhbex Afpon Motor ZBR100 B4 B050