Used Demag Df 115 C for sale (503)

Condition: used, Dear Sirs, We offer you modular systems of small crane systems of the companies "DEMAG" and "ABUS" used, partly as good as new, at favourable conditions. The systems are tailored to your needs. In case of inquiries, please tell us whether you want to carry out a linear or area-wide transport. Furthermore, we need your information on the load capacity, crane girder and track lengths, suspension distances, roof pitches and type of ceiling construction. Please tell us your lifting problems. Ledpfx Aop Dhbeabeah Furthermore, we can offer you the electric chain hoists at favorable conditions.

Condition: excellent (used), Year of construction: 2017, operating hours: 10,800 h, clamping force: 4,200 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) General Information Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control: NC5 Operating hours: 10,800 RbH Clamping Unit Clamping system: 420/... Clamping force: 420 t Platen dimensions (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mould height (min.–max.): 380 – 1050 mm (extended by 225 mm) Maximum daylight between platens: 1050 mm Ledpfx Ajxpuvcjabjah Mould opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever design with central oil lubrication Injection Unit Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, standard L:D) Additional Equipment Servo rotary adjustable pump Technology (activeDrive) Pneumatic valve 5/2 No. 1 for movable mould parts (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle heating band (socket) 2 core pull circuits controlled by proportional valves, independent of pressure (programmable, equipped with unlockable check valves to prevent core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position adjustment, freely programmable independent of P/F+v, parallel to mould movement Ejector motion controlled by proportional valve, infinitely adjustable Reinforced oil cooler (cooling water inlet up to 35°C)

Condition: good (used), Year of construction: 2005, Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420 x 420 Platen Size [mm]: 600 x 600 Mould Height min. [mm]: 200 Laodpfx Aastrzuqobsh Machine tested

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Laedpfoxmbv Dsx Aabjh Injection Moulding

Condition: ready for operation (used), hart-op-hart afstand: 22.900 mm Laodpfjxpgd Ejx Aabeh 2 Demag DH-takels van 3,2 ton (kunnen onafhankelijk of gecombineerd worden verplaatst) Wielhoogte: 550 mm Wiellengte 4600 mm hijshoogte: 8000 mm radiografisch bestuurbaar

Condition: used, Year of construction: 2010, clamping force: 500 kN, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, overall weight: 24,500 kg, load hours: 15,000 h, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Lajdpjxluk Eefx Aabsh

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm Ljdpjxmi R Asfx Aaboah -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Condition: used, Wall-mounted slewing jib crane DEMAG type KBK 2 Demag no. jib: KBK- 982 040 44 Demag no. wall bracket : 85104044 Year of construction 2000 Lifting capacity: 500 kg Outreach: 4000 mm Swivel range 270° Wall mounting plate: 1170 x 440 mm Height of lower boom to upper wall bracket: 1000 mm Flange plate wall bracket to center of bolt: 270 mm Total length of wall bracket flange plate to jib tip: 4330 mm: - Cantilever profile C-profile scissor lift DEMAG KBK 2 - Carriage for DEMAG KBK 2 C-profile trolley - Original paint yellow dead weight 170 kg Laodpfx Astqwrvoabeh very good condition Price without chain hoist - chain hoist or crane can also be found in the store.

Condition: good (used), Year of construction: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Lasdpfx Ajrgw Exeabeh Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: ready for operation (used), Year of construction: 1998, Clamping Unit Clamping force 4200 Kn This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Ledjxl H D Rspfx Aabeah Injection Moulding

Condition: used, Demag 3.2T Overhead Travelling Gantry Crane, Span Approx 14m Wide, Remote Pendant Operated. S/No. 51087901CE - No CE Mark, Terms & Conditions Apply Please Note: Dismantling and Loading will be carried out by our own supplier. Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described. Lasdpfx Aexp H A Usabeh Please Note: Dismantling and Loading will be carried out by our own supplier. More information to follow...

Condition: used, Year of construction: 2017, clamping force: 480 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,500 kg, load hours: 12,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Laodpfx Aaexlukxsbeh

Condition: good (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 315 kg -Base plate: 380 x 380 mm -Thrust: 2,500 mm -Total height: 2,530 mm Lasdpfx Aaoxmi Arebsh -Hook height: 1,325 mm -Chain hoist: DEMAG type DC-Pro 5 315 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 1.9 m/min -Transport dimensions: 800/2810/H750 mm -Own weight: 306 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Lsdsxn N H Tjpfx Aaboah Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: ready for operation (used), functionality: fully functional, power: 27.21 kW (37.00 HP), overall weight: 7,500 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, Year of construction: 1970, operating hours: 2,314 h, Equipment: additional headlights, cable winch, hydraulics, DEMAG mobile crane V 42 from government ownership, little used, year of manufacture 1970, engine 3-cylinder air-cooled, max reach 5.95 m, max lifting capacity 4 tons. Sale only to businesses and with exclusion of any warranty. Lajdpfsw Ivldsx Aaboh Loading possible.

Condition: ready for operation (used), Year of construction: 2005, Clamping Unit Clamping force 4200 Kn This DEMAG Ergotech 420/810-2300 was manufactured in 2005. It is a hydraulic injection moulding machine featuring a clamping force of 4200Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 420/810-2300 hydraulic injection moulding machine. Contact us for more information. Lasdsxl H Dwopfx Aabeh Application Types Injection Moulding

Condition: good (used), 25 HP, 10 bar, 2570 l/min Lodoxliv Ajpfx Aabjah

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons 2 x core pullers on movable platten Lajdpfxjxd Sz Ej Aaboh \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm Lsdpfx Astpkv Aoabeah -Weight: 600 kg/total

Condition: good (used), Year of construction: 1986, Mannesmann Demag single electric chain hoist load capacity 1000 kg + load capacity 2000 kg with trolley electric or manual trolley We have 10 cranes in stock. Lodporgrp Sefx Aaboah

Condition: used, DEMAG 3.2t / 9.3m Lajdpfjxg Agwox Aabsh

Condition: used, Year of construction: 2009, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: Description SGM Operating hours Cycle counter Cylinder heating Electric drives Lsdjxpufdepfx Aabeah Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Demag 210: Screw diameter Ø 50 mm

Condition: good (used), functionality: fully functional, -KOM 3161- Offered here is a load crane from Demag. The crane can lift up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, which consists of the chain and hook block. The dimensions can be found in the last image. Unfortunately, the type plate on the drive unit is no longer present. Ledpfx Aasxcnvpeboah

Condition: used, Column-Mounted Crane DEMAG type PK1 N-F Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Lasdpfx Aoxpubxeabeh Height under arm: 2700 mm With electric hoist Chain exit: length 2100 mm In good condition Voltage: 380 V Weight: approx 250 kg

Condition: used, Year of construction: 2007, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 Designation: SGM Operating hours: 29,125 Cycle counter: 26,530 Total cycles: 3,562,329 Cylinder heating, electric drives Sumitomo Demag IntElect 150/520-610 Demag 150: Screw diameter Ø 45 mm Lodpfxjxpudms Aabsah