Used Demag Df 115 C for sale (507)

Condition: used, Year of construction: 2002, Additional title: Slewing crane Maximum load: 2000 kg Reach: 4 m Kodsxykvmopfx Aanofa Height: 4,61 m

Condition: ready for operation (used), functionality: fully functional, power: 27.21 kW (37.00 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 7,500 kg, axle configuration: 4x2, number of seats: 1, Year of construction: 1970, operating hours: 2,314 h, fuel: diesel, Equipment: additional headlights, cabin, cable winch, crane, hydraulics, DEMAG mobile crane V 42 from government ownership, little used, year of manufacture 1970, engine 3-cylinder air-cooled, max reach 5.95 m, max lifting capacity 4 tons. Sale only to businesses and with exclusion of any warranty. Kodpfxjw Ivlde Aanefa Loading possible.

Condition: good (used), good condition – the hook block cover is slightly damaged – 8t lifting gear according to factory, downgraded to 6.5t – for further information see type plate Kfedpfx Aaox Hhgrenea

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Ksdjx Hg R Aspfx Aanefa Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: excellent (used), Year of construction: 2006, screw diameter: 22 mm, displacement volume: 41 cm³, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4 Kjdpfox A E N Tjx Aanjfa

Condition: repair required (used), Year of construction: 1998, functionality: not functional, For sale: Demag 110 9 t machine, year 1998. The machine is not operational and requires refurbishment. Kfedpfex A Sptox Aanoa

Condition: excellent (used), Year of construction: 2005, Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420 x 420 Platen Size [mm]: 600 x 600 Mould Height min. [mm]: 200 Kfsdpfx Aotrzuqoanea Machine tested

Condition: ready for operation (used), Year of construction: 2017, Demag Overhead Crane Double-Girder Suspension Bridge Crane Inspection logbook available! Double-Girder Suspension Crane: Manufacturer: Liebl Kranbau GmbH Load capacity: 500 kg Year of manufacture: 2017 Crane track gauge: 4500 mm Length: approx. 6 m Width: approx. 5.13 m Chain Hoist: Manufacturer: Demag Model: DC-COM 5-500 Year of manufacture: 2017 Lifting capacity: 500 kg Kfsdpfxjx Eikyj Aanoa Fine lift speed: 1.1 m/min Main lift speed: 4.5 m/min Hook path: 4 m You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Technical data may deviate and errors in the item description can occur and are subject to change.

Condition: good (used), Load capacity: 500 kg Kfjdsg T Ib Hopfx Aansa Total length: 10m

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Kfodpfx Ajwk T Uijanja Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon Kfodpfxsxwup Es Aanja -Manufacturer: Demag, heavy-duty rail wagons -Platform: 3980 x 2500 mm -Load capacity: 40,000 kg -Roller spacing: 1505 mm -Overall dimensions: 4160/2500/H885 mm -Empty weight: 3360 kg

Condition: used, Demag plasticising unit IU mm Kedpfx Aajh Nv Itenofa - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Ksdpfxsva H Ame Aanefa Working hours: 46.511 Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2017, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Demag Systec 420/820-2300 (Servo) Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control system: NC5 Operating hours: 10,800 h Clamping unit type: 420/... Clamping force: 420 t Platen size (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mold height (min.–max.): 380 – 1050 mm (increased by 225 mm) Maximum distance between platens: 1050 mm Opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever mechanism with central oil lubrication Injection unit type: …/2300 Screw diameter: 70 mm Kfjdpfx Aexywd Doanoa Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, L:D standard) Additional equipment Rotary Servo Technology variable displacement pump (activeDrive) 5/2 pneumatic valve no. 1 for mold moving components (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle band heater (socket) 2 core pull circuits controlled by proportional valves, pressure-independent (programmable with unlockable check valves against core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position control, programmable independently of P/F+v, parallel to mold movement Ejector movement controlled by proportional valve, stepless adjustment Reinforced oil cooler (cooling water inlet up to 35 °C)

Condition: good (used), functionality: fully functional, Year of construction: 2008, type of input current: three-phase, For sale is a DEMAG mobile crane, year of manufacture 2008. Technical specifications: Kedpfx Aasxmg Dyenefa - Outreach: 2 meters - Lifting capacity: 125 kg The crane is fully functional and can be inspected on site.

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, General information Field of application: Construction Serial number: 82609 Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Kfedowk Aw Hjpfx Aanja Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, DEMAG DH525 H12, 5 t. Overhaul (technical and visual) possible by us. Without electrics KBH 140 B 2/12 Additional hoisting units, motors KBH / KBF / KBV / K-Motor, spare parts, rope guides, running wheels, brakes, and much more available on request. Kfedpfx Asx Ap R Uoanoa Please contact us by phone or email for questions or quote requests.

Condition: good (used), Pillar jib crane, Demag / J.D. Neuhaus, 125 kg with pneumatic chain hoist – used - : Ex works price: now only €950 instead of €1,500 (net)! Manufacturer: Demag Chain hoist manufacturer: J.D. Neuhaus Model: unknown or to be advised Year of manufacture: unknown or to be advised Load capacity: 125 kg Column height and jib length to be provided Condition: good Available: approx. from mid-January to mid-February 2025 Location: Munich. Later warehouse Frankenberg Kjdpfxevn Ri Hj Aansfa

Year of construction: 2024, condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Ksdpfeqvuigjx Aansfa

Condition: used, Year of construction: 2005, functionality: fully functional, clamping force: 2,000 kN, Details on request. Ksdpfx Ajxz D Ixsanefa

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH373-27, 1 Vetter / Demag wall-mounted slewing crane, 250 KG capacity / lifting load Type UW2.5-6.0 Slewing radius approx. 6m, 250KG / 0.25t capacity With chain hoist, 250KG lifting capacity (2 lifting speeds) Kodpexz Tqpsfx Aanofa Total weight approx. 250 kg Year of manufacture 2004, with inspection logbook Complete with wall bracket, jib arm, chain hoist, cable festoon, trolley, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim Unit is fully dismantled and immediately available See pictures Shipping by freight or pick-up Please request shipping costs according to postal code

Year of construction: 2024, condition: new, Demag NC3 panel new never used width- 30cm height- 5cm length- 50 cm Kfsdpfx Aoqvuinjanja

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: NOH372-43 // 374-48, 1 Vetter / Demag Wall-Mounted Slewing Crane 250 kg Payload Crane available 2x!!! Model PW2,5-6.0 Jib length approx. 6m, 250 kg/0.25 t payload With chain hoist, 250 kg lifting capacity (2 lifting speeds) Total weight approx. 250 kg Year of manufacture 2006, with inspection logbook Supplied complete with wall bracket, jib, chain hoist, cable trolley, travel mechanism, and small parts Slewing range approx. 180° Location: 75053 Gondelsheim Installation is completely dismantled and available immediately Kfedexz Tmkopfx Aanja See pictures Shipping via freight forwarder or collection Please inquire about shipping costs according to ZIP code

Year of construction: 2024, condition: new, NEW , NEVER USED Demag Panel NC3 MAde in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Kfjdpfeuz Uq Eox Aansa

Condition: good (used), Year of construction: 2005, functionality: fully functional, Robot Demag W710 axis) (Wittmann) Number of axis: 3 Kedpfx Aajxp Nu Tjnefa X- 600 mm Y- 800 mm Z- 1500 mm