Used Demag Electric Motor for sale (510)

Condition: good (used), functionality: fully functional, power: 150.78 kW (205.00 HP), fuel type: diesel, fuel tank capacity: 300 l, overall weight: 53,523 kg, maximum load weight: 1,12,000 kg, Year of construction: 2006, machine/vehicle number: 506081, Equipment: cabin, crane, hydraulics, USED DEMAG CRANE FOR SALE DEMAG CRAWLER CRANE MODEL: A600 C YEAR OF MANUFACTURE: 2006 Good Working Condition Godpfx Aloumqy Eobouc Machine sold as its Condition For More details please Contact Vijay JPN Industrial Trading Pte Ltd, 13A, Pandan Crescent, Singapore-128478

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines Gujdpfx Aer E Ht Helbec - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Guedpfx Ashrkrtslbsc Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Gedpfx Aleptlblsbsuc Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 20020233 UG 1 Brücke, DEMAG KBK crane canopy crane runway with dimensions approx. 29 x 6m (6m bridge - double girder crane) Payload / lifting capacity 1000 KG - 1to Technical data of the system: Crane runway made of Demag KBK2 rails with internal current routing System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets/hangers etc. incl. Demag PK5 - 1000KG chain hoist - lifting height approx. 4m Crane is disassembled and immediately available Guodpfxsty Tdbs Albsc Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 2006, condition: good (used), machine/vehicle number: WIZ, Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails External dimensions of steel construction (space required) 13.2 x 5.5m Height of steel construction 4.85 m, UK steel construction 4.65 m UK runway crane 4.4m, UK bridge 4m, hook height 3.8m Support spacing 4 + 4 + 4.9m The system is delivered complete: KBK rails, rail connectors Undercarriages, end plates, drag cables, holders/hangers, etc + complete steel construction (HEA180) incl. Demag DC 500KG chain hoist Crane is dismantled and available immediately Item location is 75053 Gondelsheim Good condition, see pictures (contaminated by oil mist - can be easily cleaned) Dispatch by forwarding agent or pick-up only by appointment Gedjiwdaqspfx Albsuc Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD396, DEMAG KBK Crane Ceiling Crane Runway with dimensions approx. 19.5x7m (2x 7m bridge) Payload / Lifting Capacity: 2x 250 kg - 0.25 t Technical Data of the System: Guedpfsxdvn Ajx Albjc Runway made from Demag KBK2 rails, one side with KBKII-R rails featuring integrated power feed System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. including 2 bridges, each 250 kg including 2x 250 kg Demag DC chain hoists Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection only by appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems available. Load capacities from 125 kg to 1600 kg Please inquire about your crane runway with required capacity and dimensions, non-binding.

Condition: new, functionality: fully functional, Basic Drive Specifications (ACS800-DEMAG 04M-0170-3) Product Series: ACS800 (ABB Industrial Low-Voltage Drive) Application Software: DEMAG (Loaded with Demag's proprietary crane control program rather than standard ABB firmware). Construction Type: 04M (Drive module designed for cabinet installation with specialized mechanical configurations). Rating/Size: 0170 (Nominal current rating indicator; fits an R7 frame size).Normal Output Power: 132 kW Continuous Max Current: 248 A Heavy-Duty Power (Cranes): 110 kW (with 202 A continuous output) Voltage Rating: 3 (Three-phase input supply voltage of 380 V to 415 V AC). Hardware & Software Option Codes (+D150+E210+H355+H362+J400+L501+L502) The plus-codes define the factory-installed modifications and optional expansion modules: Code Component / Feature Description +D150 Brake Chopper Built-in dynamic braking control module. Essential for hoisting to safely dissipate energy generated during load lowering. +E210 EMC Filter Low electromagnetic emission filter conforming to standard European industrial standards (Category C3/Class A). Gjdpoy Udtkefx Albsuc +H355 Control Cabling Entry Specifies a specific bottom or standard orientation configuration for thick power/motor cables. +H362 Coated Circuit Boards Provides an extra layer of protective chemical coating on internal PCBs to prevent corrosion from dust, humidity, or aggressive industrial environments. +J400 Control Panel (CDP312R) Removable digital control panel with alphanumeric display mounted on the unit or cabinet door for programming and metrics tracking. +L501RDIO-01 Digital I/O First digital I/O extension module, giving extra programmable inputs/outputs for crane safety limits or interlocking. +L502RAIO-01 Analog I/O Analog I/O extension module, allowing precise master/joystick references or load cell signal reading. Brand new never used. Please check out our other listings as well.

Condition: used, Year of construction: 1986, operating hours: 2,000 h, functionality: fully functional, overall weight: 630 kg, motor manufacturer: Deutz, volume flow: 1.8 m³/h, Demag SC20DS construction compressor Year of manufacture: 1986 2,000 operating hours 630 kg Gsdpfjzavnvjx Albeuc 1.8 m³/min 2860 rpm 12.5 kV Deutz 1-cylinder engine: F1/2L 511/W

Condition: excellent (used), Control switch Make DEMAG Gedpfxef Ezbts Albsuc Type DSE 10 C/CS Documents available

Condition: excellent (used), DEMAG Chain Hoist Type Pk 2 N-F Lifting speeds: 10 and 2.5 m/min. 380 Volt 0.5 kW Travel drive: Gujdpfxey Sldlo Albsc 380 Volt 0.5 kW

Condition: used, Year of construction: 1994, volume capacity 5,63 m³/min Godpjtqql Rjfx Albsuc suction 1 bar pressure 8 bar turning speeds 3000 U/min engine output 37 kW weight of the machine ca. 660 kg dimensions of machine L x W x H 1,35 x 1,05 x 1,43 m

Condition: used, functionality: fully functional, lifting height: 12,000 mm, load capacity: 25,000 kg, DEMAG Hoist DH1063 H24 Gusdpfxsyyvczo Alboc 25 t 4/1 Main lift motor KBH200 B6 Main gearbox DH1000 i= 50 Micro-travel FG10 Hoist in used, good condition, functionality tested

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 1,39,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L Gujdsy T Hz Ispfx Albjc MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

Condition: used, Year of construction: 2000, Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing system Utilities: Compressed air, electrical supply Scope of Delivery Depalletizing crane system | DEMAG | Manual layer depalletizing with air-cushion gripping system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot fill Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Feed tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger based heating system Carton erecting system | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton forming unit Carton sealing system | BORTOLIN |  Hot melt carton sealing Glue system | Nordson | Series 3400 | Hot melt unit Conveyor systems | Various transport conveyors Guodpfxey Rmfbj Albsc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Heating power: 97 kW MACHINE DETAILS Gjdpfx Aey T Hy Dslbouc Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

Condition: good (used), Features: Used roller conveyor transfer unit from the manufacturer Mannesmann Demag. feet to be ordered separately Condition: Fully functional with traces of use Ideal for fast material transport Professionally disassembled and packed 5 pieces in stock Price per piece Transfer unit Transfer units with chains or belts gently lift the material to be conveyed and gently set it down on the target line. For this purpose, both lines must stop briefly during pick-up and set-down. Technical data: Gusdpfx Asdtdt Hslboc Mass of the roller conveyor total length: 935mm Total width: 920mm Details of the roller clamping length: 430mm Approx. diameter: 50mm Material: steel, galvanized Frame data Height frame: 135mm Width frame: 30mm Material: steel Customized solutions for your intralogistics For roller conveyors, belt conveyors, scraper conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be pleased to make you an individual offer or to advise you on conception or assembly questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Year of construction: 1988, condition: used, machine/vehicle number: MBMA13+25, Technical data: 1x Demag KBK 100 column slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Height: approx. 3m UK boom: approx. 2.65m Projection: 3m Hook height: approx. 2.15m Guedpfx Alsrhzh Ssbjc Weight completely approx. 350KG with 125KG Demag DK chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: new, DEMAG Spare Parts: 1. Transmitter / Circuit Board DRC - DR D3 2. Load Measuring Pin DMR 20 3. CAN Safety Transceiver 4. Brake Ring / Conical KB 160 B - 2 pieces 5. Brake Ring / Conical KB 100 B - 2 pieces 6. Clutch Set 7. Brake Disc 13KF - 3 pieces 8. Swivel Eye DK 20 - 2 pieces 9. Torque Support Set MA 125-1 - 2 pieces 10. Magnet Body for Brake B140 - 1 piece + B050 - 2 pieces Guodpfx Aljwug Nuebsc 11. Wire Rope Diameter 16 mm - 35 meters 12. Wire Rope Diameter 10 mm - 62.8 meters 13. Gear Limit Switch DGS 3

Condition: new, DEMAG brake ring / brake pad / conical brake pad - 50 pieces (new). 1. Type: KB 160 - 2 pieces. 2. Type: KB 100 - 2 pieces. 3. Type: KB 200 - 2 pieces. 4. Type: KB 140 - 2 pieces. 5. Type: KB 125 - 5 pieces. Gujdsyy Takspfx Albsc 6. Type: KB 112 - 1 piece. 7. Type: KB 90 - 2 pieces. 8. Type: KB 80 - 11 pieces. 9. Type: No. 405 - 1 piece. 10. Type: No. 616 654 - 5 pieces. 11. Type: No. 620 606 - 7 pieces. 12. Type: No. 612 648 44 - 6 pieces. 13. Type: No. 628 626 44 - 2 pieces. DEMAG brake cover / brake lid - 38 pieces. Various sizes (new / used).

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Gujdpfx Aljy Tvvnobjc Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: good (used), Year of construction: 2008, clamping force: 500 kN, Demag Systec 50/370-120 (2008) Screw size: 18 mm Gsdpfx Asy Eyq Holbsuc tie bar distance: 370x370mm machine is in good working condition immediately available at our warehouse.

Condition: used, Year of construction: 2001, clamping force: 4,200 kN, opening stroke: 710 mm, total length: 7,900 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, number of injections: 2, power: 68 kW (92.45 HP), Demag Ergotech 420/800 2300 with embossing function and Wittmann DR 633/CNC 6-316 robot Prices and further inventory can be found at inventar-verkauf.de/id/alesco. Godpfx Aey U Nkbolbeuc In addition, 2 injection molding units are included, one of which was used exclusively for clear glass. Details: Clamping force: 4200 KN Tie bar distance: 800 x 710 mm Mold opening: 710 mm Control system: Ergocontrol NC 4 Connected power: 68 KW Overall dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Wittmann DR 633/CNC 6 - 316 robot (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-cavity core pull 2 E/A (electrical/pneumatic) Embossing function retrofitted 2 x Injection molding unit: Injection molding unit 1 Shot volume: 891 cm³ Shot weight: 800 g (polystyrene) Screw diameter: 60 mm Injection pressure: 2420 bar Injection molding unit 2 Shot volume: 1212 cm³ Shot weight: 1090 g (polystyrene) Screw diameter: 70 mm Injection pressure: 1877 bar WITHOUT KOCH NOZZLE and PLASTICIZER. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN Gjdpfxewvkgms Albouc

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS Gjdswvkggopfx Albsuc closing pressure: 100 kN