Used Demag Kbk for sale (527)

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: GP188?, 1 Vetter wall-mounted slewing crane, 500 kg payload / lifting capacity Type PW5-5.0 Reach approx. 4m, 500 kg payload (0.5 tons) with chain hoist, 500 kg payload (2 lifting speeds) Total weight approx. 350 kg Year of manufacture 1996 Complete with wall bracket, jib, chain hoist, cable carrier, chassis, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition Ncedpfxsy Ugbwo Aqvot See pictures Shipping via freight forwarder or collection Please inquire about shipping costs based on your postal code.

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Nsdey N D E Aopfx Aqvect Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: GP189/K312.W7, 1 Vetter wall-mounted slewing crane, 500 KG payload / lifting capacity Nsdpoy Uflhjfx Aqvect Type PW5-5.0 Reach approx. 4m, 500KG - 0.5t payload with chain hoist, payload 500KG (2 lifting speeds) Total weight approx. 500 Kg Year of manufacture 1996 Complete with wall bracket, jib, chain hoist, cable carrier, undercarriage, and small parts Slewing range approx. 180° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Fully functional condition See pictures Shipping via freight forwarder or collection Please inquire about shipping costs based on postal code.

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Ncodpfx Asy N R U Rsqvet Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute Nedoy N R Uqjpfx Aqvsct 1x Euromap 12/67 conversion 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190

Condition: used, Year of construction: 2014, (1) Injection molding machine, Handling: Sepro Robotique | Success 22 | 2016 Temperature control: GWK Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, 1x Conveyor Unit, manufacturer Somos FG 204; year of manufacture 2022 Technical details: Clamping force (kN): 2100 Tie bar distance (mm): 580 Injection unit: 430 Power supply: 3/400 V Frequency (Hz): 50 Current 1 (A): 175 Current 2 (A): 116 Current 3 (A): 59 Weight (t): 8.93 Pressure (bar): 190 Ncodjy N R R Eopfx Aqvet

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Wittmann | W621 | 2003 Temperature control: HB Therm | HB-100 Z1 | 2013 Miscellaneous: 1x Protective Enclosure 1x Conveyor belt 1x Hot Runner Controller, Mold Masters 1x Conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 189 Current 2 (A): 152 Current 3 (A): 37 Weight (t): 10.1 Pressure (bar): 190 Flow rate (l/min): 206 Ncsdpfxjy N R Iqj Aqvst

Condition: good (used), Year of construction: 2008, clamping force: 500 kN, Demag Systec 50/370-120 (2008) Screw size: 18 mm Ncedpfxoy Eyq Hs Aqvjt tie bar distance: 370x370mm machine is in good working condition immediately available at our warehouse.

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Nedpfx Asx Ex R Esqvoct

Condition: ready for operation (used), Year of construction: 2002, clamping force: 4,200 kN, screw diameter: 70 mm, Hydraulic injection moulding machine manufactured in 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mold height of 1530 mm. It has a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG 420/810 - 2300 machine we have for sale. Contact us for further details. • Tie bar spacing (W × H): 810 × 710 mm • Magnetic clamping: No • Min. platen size (W × H): 380 • Min. mold height: 820 mm • Max. mold height: 1530 mm • Max. distance between platens: 1530 • Max. weight of moving mold half: 2200 kg • Centering ring diameter/height: 160 × 15 • Sprue bushing radius: R19 • Ejector coupling thread diameter: M24 • Shot volume: 1090 cm³ • Hot runners: 8 • Cascades air (number): 6 • Cascades hydraulics (number): 6 • Hydraulic core pulls: 2 • Capacity oil fillings: 730 Ncsdpfxsy Nyfle Aqvjt • Power supply: 217 A • Power input: 127.5 kW Additional equipment • Robot: Demag, year of manufacture 2002

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Ncedpfoy Tx Rbsx Aqvet

Year of construction: 2009, condition: ready for operation (used), Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed power: 112kW, continuous sound pressure level: 78dB(A), length: 6500mm, width: 2000mm, height: 2300mm, weight: 15.7t, operating hours according to PLC: 28,890h, barrel heating: 35,656h, pump: 27,922h, documentation available. An on-site inspection is possible. Nodpfx Aqjy Tx Rnevsct

Condition: good (used), Year of construction: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Additional information & extras Core pull: 1 pcs Nodjy Ub D Tepfx Aqvoct Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Ncodpey Ub D Hsfx Aqvjt Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18620 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability Nedpfx Aqoy Ub Dysvoct * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18619 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Ncedpfx Aey Ub Dtoqvet Further information: Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden. Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität. Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten. Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen. Die wichtigsten Vorteile der IntElect Serie: * Vollelektrische Direct-Drive Servo-Technologie * Sehr geringer Energieverbrauch * Hohe Präzision und Prozesswiederholgenauigkeit * Geräuscharmer und vibrationsarmer Betrieb * Hohe dynamische Servo-Performance * Geringer Wartungsaufwand * Saubere Produktionsumgebung * Ideale Lösung für technische und Präzisionsteile * Geeignet für schnelle Serienproduktionen Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.

Condition: good (used), Year of construction: 2012, Ref. no.: 18610 Manufacturer: DEMAG Type: IntElect 160/520-340 NC5 Njdpfoy Ub Dmox Aqvect Year of construction: 2012 Clamping unit Clamping force: 160 ton Opening stroke: 495 mm Distance between tie bars: 520 x 520 mm Mould height min.: 275 mm Mould height max.: 585 mm Platen size (h x v): 760 x 785 mm Injection unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight: 139 g Injection pressure: 2180 bar Measurements and weight Dimensions: 5,4 x 1,5 x 2,1 m Machine weight: 7600 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: excellent (used), DEMAG Chain Hoist Model PK 5 Load Capacity 1000 kg Lifting Height 4 meters Lifting Speed 7.5 meters/min. Overall Length 700 mm 380 Volt 1.4 kW Year of Manufacture 1967 Condition is very good, only occasionally used. Can be tested on site. Transport Dimensions: Njdsy I Ulkspfx Aqvsct Length 700 mm Width 400 mm Height 320 mm Weight 60 kg

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, Sumitomo DEMAG Systec 120/470-600 NC 5 Year of manufacture: 2007 Control system: NC 5 Screw diameter: 45mm Injection volume: 323ccm / 294g Clamping force: 1200KN Tie-bar spacing: 470mm x 470mm Minimum mould height: 150mm Maximum plate spacing: 850mm (900 / 950 with WA) Opening stroke: 800mm Ejector stroke: 180mm Nodpfx Aoy Tcu Djqvoct The machine is currently being overhauled and tested for functionality.

Condition: used, Year of construction: 1978, arm length 5500 mm weight max. in kg 250 kg height 3800 mm Lifting height 3800 mm Crane number 1.30 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Ncjdpfx Aeyqvlijqvet About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), functionality: fully functional, power: 150.78 kW (205.00 HP), fuel type: diesel, fuel tank capacity: 300 l, overall weight: 53,523 kg, maximum load weight: 1,12,000 kg, Year of construction: 2006, machine/vehicle number: 506081, Equipment: cabin, crane, hydraulics, USED DEMAG CRANE FOR SALE DEMAG CRAWLER CRANE MODEL: A600 C YEAR OF MANUFACTURE: 2006 Good Working Condition Machine sold as its Condition For More details please Contact Vijay JPN Industrial Trading Pte Ltd, Nedsumqy Espfx Aqvsct 13A, Pandan Crescent, Singapore-128478

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Ncsdpfoxhfuasx Aqvet Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: ready for operation (used), Year of construction: 2001, clamping force: 3,000 kN, overall weight: 13,900 kg, This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details. • Max. Hydraulic Pressure: 190 bar • Max. Flow Rate: 164 l/min • Total Amperage: 181 A • Heating Amperage: 102 A • Drive Amperage: 79 A Ncodsy Icikjpfx Aqvjt • Control Amperage: 67 A • Operation Voltage: 400 V • Frequency: 50 Hz • Certification: CE

Condition: excellent (used), functionality: fully functional, lifting height: 2,000 mm, load capacity: 1,500 kg, For sale: Demag slewing crane with chain hoist, column height 286 cm, jib length from slewing pin 320 cm. Ncsdpeymv T Sefx Aqvjt

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons Distance between tie bars: 475 x 475 mm Nedpexd Sz Esfx Aqvoct 2 x core pullers on movable platten \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)