Used Demag Kbk for sale (496)

Condition: good (used), Year of construction: 1965, weight max. 250 kg throat 2.500 mm height 3000 mm Base plate 600 x 600 Column-mounted slewing jib crane from DEMAG Load capacity 250kg Gusdpfsvylh Iox Aabeh Outreach: 2,500 mm Floor operation Console fixing plate 600 x 600 mm

Condition: new, functionality: fully functional, power: 10 kW (13.60 HP), rotational speed (max.): 2,800 rpm, Demag motor GCH140 D2 Condition: new, price on request ED 100% 10.00 kW Gusdpfoxgg S Dox Aabjh 31.5 A 2800 rpm 380V 50 Hz Brake: 19 Nm

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Gjdpfxsxc Inxo Aabeuh Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: excellent (used), functionality: fully functional, Year of construction: 1979, DEMAG fine travel drive, consisting of: DEMAG motor KBA 140 B 4, 8.8 kW, 1,440 rpm; DEMAG motor KBA 80 B 4, 1.4 kW, 1,340 rpm; DEMAG gearbox EGO 8 B 3 I = 9.9 Gsdew Ulirspfx Aabouh

Condition: excellent (used), For sale: professional pneumatic turbine GTV 1000 from the renowned brand Mannesmann Demag – original, fully functional, and in excellent condition. - Technical specifications: • Rotational speed: 100,000 rpm • Power supply: compressed air (approx. 6 bar) • Air consumption: approx. 318 l/min • Spindle diameter: 30 mm • Total length: approx. 120 mm • Weight: only 210 g • Collet: 3 mm • Oil-free version – clean operation without lubrication - Why choose this? • Extremely lightweight and compact – ideal for continuous operation Gjdjw Rd I Eopfx Aabeuh • German quality – precise bearings, no vibration • Perfect for deburring, micro-milling, and robotics applications • Oil-free – cleaner operation and reduced material wear

Condition: good (used), Year of construction: 1987, machine/vehicle number: 38, Offer 25014 Technical data (approx.): - Load capacity 250 kg - Outreach 6.0 m - Hook height approx. approx. 5.0 m - Wall mounting flange height approx. 820 mm - Flange width approx. 400 mm - Hole pattern / hole spacing approx. 720 x 325 mm - Slewing radius approx. 180° Hoist Guedpfexfri Sex Aabsh Brand: DEMAG Type: PK 2 L Machine no.: 5692073 Year of manufacture: 1986 Technical data: - Load capacity 250 kg - Lifting speed 14 m/min - Drive 400 V / 0.7 kW - Chain hoist operated via handheld remote control - Manual slewing of the jib arm - Total weight approx. 300 kg - Transport length 6.5 m

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available Gsdjw Uy Uispfx Aabjuh -Dimensions: 220/97/H160 mm -Weight: 8.5 kg

Year of construction: 1991, condition: used, machine/vehicle number: 149125/95, max. operating pressure: 8 bar Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Space requirement: 820 x 950 x 1200 mm high Weight: 360 kg Air vessel, make KAESER, year of construction 1999 Capacity: 1000 l max. operating pressure: 11 bar Guodpfxoby Hpbj Aaboh Space requirement: 800 Ø x 2300 mm high

Condition: excellent (used), Year of construction: 2009, operating hours: 25,500 h, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580 mm, displacement volume: 442 cm³, injection pressure: 2,100 bar, injection weight: 393 g, overall weight: 11,000 kg, General Data Year of manufacture: 2009 Weight: 11,000 kg Gedsxc Ifwepfx Aabouh Dimensions (L × W × H): 6.7 × 1.7 × 2.2 m Control system: NC5 Operating hours: 25,500 h Clamping Unit Clamping system: 210/... Clamping force: 210 t Platen dimensions (H × V): 855 × 860 mm Tie bar spacing (H × V): 580 × 580 mm Mold height (min.–max.): 340 – 690 mm (max. increased) Opening stroke: 575 mm Maximum daylight: 1265 mm Ejector stroke: 165 mm Ejector force: 60 kN Ejector coupling: mechanical (automatic engagement, manual disengagement) Injection Unit Injection unit type: …/1000 Screw diameter: 50 mm Screw L/D ratio: 20 Injection volume: 442 cm³ Shot weight: 393 g Specific injection pressure: 2,100 bar Wear-resistant screw; bimetallic cylinder; standard L:D Check valve (RSP), 3-piece, ring type Additional Equipment Extended maximum mold height (min. unchanged, max. increased) Mold opening and ejector function only with safety guard closed Programmable injection pressure before screw (multi-point curve – 6 support points) Injection, hold pressure, pre-injection pressure, dosing – adjustable Manual pressure relief for 2 hydraulic core circuits on the moving platen (shared valve)

Condition: good (used), Features: Used roller conveyor transfer unit from the manufacturer Mannesmann Demag. feet to be ordered separately Condition: Fully functional with traces of use Ideal for fast material transport Professionally disassembled and packed 5 pieces in stock Price per piece Transfer unit Transfer units with chains or belts gently lift the material to be conveyed and gently set it down on the target line. For this purpose, both lines must stop briefly during pick-up and set-down. Gedpjdtdt Hjfx Aabjuh Technical data: Mass of the roller conveyor total length: 935mm Total width: 920mm Details of the roller clamping length: 430mm Approx. diameter: 50mm Material: steel, galvanized Frame data Height frame: 135mm Width frame: 30mm Material: steel Customized solutions for your intralogistics For roller conveyors, belt conveyors, scraper conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be pleased to make you an individual offer or to advise you on conception or assembly questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Year of construction: 1963, condition: used, machine/vehicle number: WR15, Technical data: 1x Zasche Demag column-mounted slewing jib crane NL 250KG with Demag chain hoist Payload at full radius 250KG / 0.25to payload TYPE Zasche 250/3,5-3 Height: approx. 4m Lower boom: approx. 3.8m Outreach: 3m Hook height: approx. 3.3m Weight complete approx. 700KG incl. dowel plate 80x80m with 250KG Demag chain hoist incl. bolts, cable drag, trolley, end cap etc. Swivel range 360°, connection to 400V 16A Godsrt R H Sepfx Aabouh Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: good (used), Year of construction: 1987, machine/vehicle number: 37, Offer 25013 Technical data approx.: - Load capacity: 250 kg - Outreach: 6.0 m - Hook height approx.: 5.0 m Godpfxsxfrhbe Aabjuh - Wall mounting flange height approx.: 820 mm - Flange width approx.: 400 mm - Hole pattern / hole distances approx.: 720 x 325 mm - Slewing radius approx.: 180° Hoist Manufacturer: DEMAG Type: PK 2 L Machine no.: 5692044 Year of manufacture: 1986 Technical data: - Load capacity: 250 kg - Lifting speed: 14 m/min - Drive: 400 V / 0.7 kW - Chain hoist operated by remote hand control - Jib arm slewed manually - Total weight approx.: 300 kg - Transport length: 6.5 m

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system Gusdpfx Ajw Uxt Roabsh -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 48 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.5 kg/piece

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Gedpfxsw T S T Uo Aabouh Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: excellent (used), Year of construction: 2017, operating hours: 10,800 h, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, overall weight: 21,000 kg, Demag Systec 420/820-2300 (Servo) General Information Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control: NC5 Operating hours: 10,800 RbH Clamping Unit Clamping system: 420/... Clamping force: 420 t Platen dimensions (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Gujdpfx Aoxc Idtoaboh Mould height (min.–max.): 380 – 1050 mm (extended by 225 mm) Maximum daylight between platens: 1050 mm Mould opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever design with central oil lubrication Injection Unit Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, standard L:D) Additional Equipment Servo rotary adjustable pump Technology (activeDrive) Pneumatic valve 5/2 No. 1 for movable mould parts (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle heating band (socket) 2 core pull circuits controlled by proportional valves, independent of pressure (programmable, equipped with unlockable check valves to prevent core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position adjustment, freely programmable independent of P/F+v, parallel to mould movement Ejector motion controlled by proportional valve, infinitely adjustable Reinforced oil cooler (cooling water inlet up to 35°C)

Condition: good (used), Load capacity: 500 kg Total length: 10m Gjdpfx Aeg T Ib Hsabsuh

Year of construction: 2024, condition: new, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250Kg) / KD63 motor / DRF200 friction drive Replacement fan cover / fan cover - not an original part! OEM part number 12481133 Larger quantities are also available - please inquire. NEW, unused Guedsq U Iitjpfx Aabeh Item location is 75053 Gondelsheim See pictures

Condition: good (used), Year of construction: 1987, machine/vehicle number: 36, Offer 25011 Technical data approx.: - Load capacity 250 kg - Outreach 6.0 m - Hook height approx. approx. 5.0 m - Wall mounting flange height approx. approx. 820 mm - Flange width approx. approx. 400 mm - Hole pattern / hole spacing approx. 720 x 325 mm - Slew radius approx. approx. 180° Hoist Brand: DEMAG Type: PK 2 L Serial no: 5710318 Year: 1986 Technical data: Guodoxfirkjpfx Aabeh - Load capacity 250 kg - Lifting speed 14 m/min - Drive 400 V 0.7 kW - Chain hoist operated via pendant control - Jib arm slewing by hand - Total weight approx. 300 kg - Transport length approx. 6.5 m

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system Godpfx Aaew Uw Tcobeuh -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 60 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 2x wheel block available -Price: per piece -Dimensions: 220/97/H160 mm -Weight: 8.7 kg/piece

Condition: good (used), Year of construction: 1991, machine/vehicle number: 73, Offer 25004 Technical data approx.: - Load capacity: 250 kg - Outreach: 6.0 m - Hook height approx.: 5.0 m - Wall mounting flange height approx.: 820 mm - Flange width approx.: 400 mm - Hole pattern / hole spacing approx.: 720 x 325 mm - Slewing radius approx.: 180° Gjdpfxexfik Tj Aabeuh Hoist Manufacturer: DEMAG Type: PK 2 L Machine no.: 5321200 Year of manufacture: 1991 Technical data: - Load capacity: 250 kg - Lifting speed: 14 m/min - Drive: 400 V 0.7 kW - Chain hoist operated via pendant control - Jib arm slewing by hand - Total weight approx.: 300 kg - Transport length approx.: 6.5 m

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation Gjdpow Uvv Aefx Aabjuh -Wheel: Rail width intermediate dimension 52 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1 piece available -Dimensions: 220/123/H160 mm -Weight: 9 kg

Year of construction: 2007, condition: used, Offer 22111 Technical specifications: - HADEF Type CH 2 hoist, built in 2007, load capacity 500 kg - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min - Manual trolley - Clearance between the traveling columns approx. 2750 mm - Clearance height at the bottom edge of the portal beam approx. 2900 mm - Mobile beam approx. 1500 mm - 4 swivel casters Guedov S Du Repfx Aabsh - Total width approx. 3050 mm - Total depth approx. 1500 mm - Total height approx. 3050 mm - 400 V drive - Total weight – crane + hoist approx. 250 kg

Condition: used, Year of construction: 1987, machine/vehicle number: 34, Ref. No. 25008 Technical specifications (approx.): Godpfjw Ddaiex Aabeuh - Load capacity: 250 kg - Outreach: 6.0 m - Hook height (approx.): 5.0 m - Wall flange height: approx. 820 mm - Flange width: approx. 400 mm - Hole pattern / hole spacing: approx. 720 x 325 mm - Slewing radius: approx. 180° Hoisting unit Manufacturer: DEMAG Type: PK 2 L Machine No.: 5710311 Year of manufacture: 1986 Technical specifications: - Load capacity: 250 kg - Lifting speed: 14 m/min - Drive: 400 V, 0.7 kW - Chain hoist operation via remote hand control - Manual slewing of the jib arm - Total weight: approx. 300 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 75, Offer 25002 Technical Data (approximate): - Load capacity: 250 kg - Outreach: 5.2 m - Hook height (approx.): 5.0 m - Wall flange height (approx.): 820 mm - Flange width (approx.): 400 mm - Bolt pattern / Hole spacing (approx.): 720 x 325 mm - Slewing radius (approx.): 180° Hoisting unit Brand: DEMAG Model: PK 2 L Serial No.: 5710314 Year of manufacture: 1986 Technical Data: Gedew I Sw Aopfx Aabjuh - Load capacity: 250 kg - Lifting speed: 14 m/min - Drive: 400 V, 0.7 kW - Chain hoist operation via pendant control - Jib slewing by hand - Total weight: approx. 300 kg - Transport length: approx. 5.8 m

Condition: good (used), Year of construction: 1987, machine/vehicle number: 33, Offer 25003 Technical specifications (approx.): - Load capacity: 250 kg - Outreach: 6.0 m - Hook height (approx.): 5.0 m - Wall bracket height (approx.): 820 mm - Flange width (approx.): 400 mm - Hole pattern / hole spacing (approx.): 720 x 325 mm - Slewing radius (approx.): 180° Hoist Manufacturer: DEMAG Type: PK 2 L Machine No.: 5710310 Year: 1986 Technical data: - Load capacity: 250 kg - Lifting speed: 14 m/min Godpsw I S Hksfx Aabouh - Drive: 400 V, 0.7 kW - Chain hoist operated via handheld remote control - Jib arm slewed manually - Total weight (approx.): 300 kg - Transport length (approx.): 6.5 m