Used Demag Pk 2 Nf for sale (507)

Condition: good (used), Year of construction: 2012, clamping force: 2,800 kN, Equipment: documentation/manual, Demag Systec 280/630-600 (2012) Clamping force: 280 t Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Plate size: 950x950 mm Min tool height: 330 mm Max opening: 1385 (1505 mm) Shot volume: 323 cm3 Screw diameter: 45 mm Shot weight: 294 g Type: Horizontal Drive: Hydraulic Euromap 67 16 hotrunner zones 4 core pullers Cgjdpfx Aoxykw Rjbpon 2 air blow

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,646 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It features a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine includes a linear robot system and a 9-zone hot runner mold temperature control. Consider the opportunity to buy this DEMAG El Exis S250/630-2300 electrical injection moulding machine. Contact us for more information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 950 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Max daylight (open distance): 1505 mm • Opening stroke: 675 mm • Ejector: 200 mm stroke / 80 kN force • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar Codpfxeyftams Abpogn • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating power: 14.8 kW • Hybrid drive power consumption: • Total installed power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Valve gate control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9‑zone hot runner integrated • Interfaces: Printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle: 2.00 s • Noise level: 74 dB(A) • Note from owner • Describes a hybrid high-speed machine with a larger injection unit (Type 2300 vs Type 840) than the referenced inventory machine above. Additional equipment • Linear robot W633-961 (axes: X=900 mm / Y=1600 mm / Z=2500 mm)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN Cgodpfxeyfq Alj Abpen • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: good (used), Year of construction: 2008, clamping force: 1,700 kN, Equipment: documentation/manual, Demag Systec 170/520 – 600 CLAMPING UNIT Clamping force: 1700 kN Locking force: 1870 kN Max. opening stroke: 500 mm Min. mould height: 275 mm Max. mould height: 585 mm Max. daylight between platens: 1085 mm Platen size: 770 × 770 mm Distance between tie bars: 520 × 520 mm Max. mould weight: 1900 kg Max. mould weight on moving platen: 1300 kg EJECTOR Ejector stroke: 160 mm Ejector force: 59 kN Ejector return force: 29 kN INJECTION UNIT 600 L/D ratio: 20 Cedpfx Abjx Ury Eepjgn Screw Ø45 mm Injection pressure: 1914 bar Shot volume: 323 cm³ Shot weight (PS): 294 g Max. screw stroke: 203 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating power: Ø40 → 11.1 kW Ø45 → 11.3 kW Ø50 → 15.7 kW Material hopper capacity: 50 l GENERAL MACHINE DATA Oil tank capacity: 400 l Hydraulic unit: 22 kW Total installed power: 33.1 kW / 33.3 kW / 37.7 kW EUROMAP 6 dry cycle: 1.95–364 Machine weight (without oil): 6900 kg Machine dimensions (L × W × H): 5.3 × 1.6 × 2.0 m Noise level: 68 dB(A)

Condition: excellent (used), Year of construction: 2015, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Cjdpfxjx Tdwyj Abpjgn Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Codpfx Ajx Tdp Njbpsgn Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Codox D Nxzspfx Abpegn Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, clamping force: 4,200 kN, screw diameter: 70 mm, This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. • Witmann included Cedex D Hyvspfx Abpegn

Condition: used, Year of construction: 2007, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: 6260 x 1555 x 2219 mm (L x W x H), net weight 11,000 kg - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Designation: SGM Operating hours Cycle counter Codpfx Absw E N S Tspsgn Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Designation: SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 - Sumitomo Demag IntElect 150/520-610, year of manufacture 2007: 5348 x 1468 x 2400 mm (L x W x H), net weight 7,400 kg. Demag 150: Screw diameter Ø 45 mm

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler Cgjdpfx Asx D Rqrobpjn • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2012, clamping force: 2,500 kN, screw diameter: 50 mm, injection weight: 482 g, total height: 2,400 mm, overall weight: 14,900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. • Clamping unit size: 250 • Holding force: 2750 kN • Platen size (H x V): 930 x 930 mm • Distance between tie bars (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: Standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm3/s • Metering stroke: 270 mm • Nozzle stroke (max): 110 mm • Material hopper capacity: 110 L Cgedpjx D Nwqofx Abpsn • Electric metering drive: 13.1 kW • Cylinder heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Max drive overhang with nozzle contact: 184 mm • Max drive overhang with nozzle retraction: 1279 mm • The maximum injection weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine Depth 6600 mm

Condition: used, mileage: 2,21,291 km, Year of construction: 2009, operating hours: 15,356 h, Drivetrain Drive: Wheel Cedpfx Abowwqbyopsgn Weights Empty weight: 22.000 kg Functional Lifting capacity: 30.000 kg Identification Serial number: 86584 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.3x2.4x3.45 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Cjdpjwk Aw Hefx Abpsgn Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Cgjdpfsx Uqb Iex Abpen Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: excellent (used), DEMAG wheel drive motor 36/24 K6P for electric wire rope hoist P2000 / P1600, optionally with clutch and brake disc. Type 36/24 K6P, motor completely overhauled, in very good condition. Armature / rotor / runner, bearing end shields, clutch, and brake also available separately. Cedjv Uai Ajpfx Abpjgn

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 Codpsxxrr Tjfx Abpegn General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 5 t span width: 21000 mm stroke speed: 8,0 precise lift: 0,8 m/min Cgsdeu Nvg Depfx Abpon rope diameter: 14 mm connected load: 10,2 kW SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 100 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 71 A2, travel speed 2,5 m/min. Size of travel wheels Ø 170mm (16 pieces) Trolley main hoist EKDH 525 H12 KV3-2/1 F10; type KBV 71 B8/2; travel speed 20,0 / 5,0 m/min.; size of travel wheels Ø 125mm (4 pieces) Hoisting gear: type KBH 125 B4; lifting height 12.000 mm; braked with displacement runner; lifting speed (main stroke 8,0 m/min. and fine stroke 0,8 m/min.) single hook size 2,5 rope Ø 14mm; rope length 28.3 m; power unit group FEM 1 AM Operation via pushbutton pendant control with DST Special feature: traversing piece with interlock and stitch tracks + infrared There are more bridge cranes with a 21-meter span for sale. *

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 10 t span width: 21000 mm stroke speed: 6,3 m/min. precise lift: 1,0 m/min rope diameter: 14 mm connected load: 15,5 kW SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 112 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 80 A4, travel speed 2,5 m/min. Size of travel wheels Ø 200mm (16 pieces) trolley main hoist EKDH 525 H20 KV3-4/1 F6; type KBF 80 A8/2; speed 20,0 / 5,0 m/min.; size of travel wheels Ø 160mm (4 pieces) Cjdsv N Ib Nepfx Abpsgn Hoisting gear: type KBH 160 B2/12; lifting height 10.000 mm; braked with sliding runner; lifting speed (main stroke 6,3 m/min. and fine stroke 1,0 m/min.) Single hook size 5.0 rope Ø 14mm; rope length 46m; drive group FEM 1 Am Operation via pushbutton pendant control with DST Special feature: crossover piece with interlock and stitch tracks Es stehen weitere Brückenkrane mit der Spannweite 21 Meter zum Verkauf. *

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Cedpfxsvbh Rhs Abpogn Wireless remote control and conventional control *

Condition: used, Year of construction: 1978, Technical details: lifting capacity: 0,25 t height lower edge cantilever arm: 3450 mm cantilever arm length from center column: 3000 mm column diameter: 194 mm rotation: ca. 100 ° There are 3 column-mounted slewing cranes available for sale from Leipzig. ( price per piece) 2 column-mounted slewing jib cranes (No. 3 and No. 4) refurbished and 1 column-mounted slewing jib crane (No. 5) as is/is, without refurbishment. Demag-PK2 N-F hoist, 250kg lifting speed 10 m/min; fine lift 2.5 m/min. Load chain single chain; see type plate; control via pendant control, mobile manual at column base no. 3 and no. 5 is foot plate with 580 x 580 x 20 mm and at no. 4 foot plate 400 x 400 mm beam Cgedou Szhpopfx Abpen Column i.D. *

Condition: used, Friction wheel, impeller, bridge crane, indoor crane, assembly crane, workstation crane -Friction wheel drive for: Demag crane -with: pantograph Csdpfx Abjc Rwcxjpegn -with: control switch -Dimensions: 660/330/H340 mm -Weight: 41 kg

Condition: used, Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 Cgedpfx Abecb E Trepsn -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Condition: good (used), indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total Cgodpfju Inr Aox Abpon

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 Cgedpfx Abon Hbc Ijpsn -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: good (used), CNC control, control panel, control desk, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit board, analog distribution card, distribution print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card Cedjn H Etfepfx Abpogn -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Power supply: Type E220 G5/15WRGD -Adapter capsule: Type 6ES5 491-0LB11 5 pieces -Interface modules: 6ES5 306-7LA11 -Subrack: 6ES5 700-2LA11 -Individual components: see photos -Price/Sale: complete -Dimensions total: 485/220/H305 mm -Weight: 12.3 kg