Used Demag Pk 2 Nf for sale (567)

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-617, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel ST chain hoist 125Kg Payload at full radius 125KG / 0.125to payload Outreach: approx. 2m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Rsdpfxjty Swto Airoch Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair End carriage DRS315 Hoist unit EZ DR20 Rsdjw H S Avopfx Airjch Trolley gauge 2240 mm Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Complete with documentation and HBC Spectrum radio remote control. All motions with frequency inverter! Modifications can be offered separately.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: CR-Lack DK solo, Demag chain hoist crane lifting mechanism 1x 2500 kg, DKUN20-1250 K V1F4 Payload: 1x 2500 kg / 2.5 tons, lifting capacity - 2-strand 5 chain hoists available!!! With articulated trolley drive, undercarriage prepared for mounting on approximately HEA/HEB/HEM profiles (flange width 300 mm) With 2 lifting speeds, lifting height 7 m!!! With floor control Length of the lifting mechanism approximately 1.25 m Total weight approximately 250 kg, connection to 400V 50Hz Very good condition, fully functional Rodpfx Aiezv H Htersch Item location is 75053 Gondelsheim See pictures.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 1434441, overall weight: 3,375 kg, total height: 940 mm, total length: 13,650 mm, total width: 2,566 mm, load capacity: 10,000 kg, working height: 6,000 mm, Equipment: documentation/manual, DEMAG 10,000 KG double-girder overhead crane. 2 units available. Rcsdpo Agnw Tsfx Aireh - Span: 13,650 mm - Lifting capacity: 10,000 KG - Lifting height: 6 m - Year of construction: 1992 - Additional information: Equipped with wired controls; rail profile 50x30 mm, rail head width 50 mm, wheel set spacing 2000 mm; Delivery, customization, installation, inspection, and commissioning are all possible upon request. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all of our inventory is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and jib cranes - Chain hoists - Demag KBK rails and accessories - Vahle conductor rails Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: good (used), functionality: fully functional, 3 DEMAG single-rail traveling hoists, complete, all identical in design with DEMAG hoisting unit, type DH316 H12 with hoisting motor KBH140 B2/12 Gear ratio i=85 Hook travel 6m Main lifting speed 6.3 m/min Fine lifting speed 1 m/min Load capacity 6.3 tons Reeving 4/1 Rcjdpfxev Uvu Ue Aireh very good used condition, price per unit 3 units for €13,900.00 net numerous hoisting units in stock Info: we have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Also, check out my other offers from my stock!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, total height: 1,000 mm, total length: 9,600 mm, total width: 2,340 mm, load capacity: 2,000 kg, working height: 4,000 mm, lifting height: 4,000 mm, Equipment: documentation/manual, Demag overhead crane – Type: single-girder – Capacity: 2,000 kg – Lifting height: min. 4 m – Year of manufacture: 1990 – Hoist type: chain hoist Rodpfx As Aarltsirsch Dimensions – Span: 9,400 mm centre-to-centre – Installation height: 330 mm – Width of wheel set including buffers: 2,340 mm – Wheelbase: 2,000 mm – Suitable for crane rail: 50×30 mm Speed – Hoisting: 4/1 m/min (2 speeds) Features – Control: wired push-button control box – Crane manual available: yes, recently updated – Last service: 10/2025 – Condition: in good working order, serviced annually – Dismantled: yes, available immediately

Condition: used, functionality: fully functional, machine/vehicle number: 001662U, load capacity: 10,000 kg, For sale Used Demag single-girder overhead crane, approximately 23,900 mm span x 2 x 5,000 kg capacity. Ref. 001662U * Stored indoors * Technically 100% functional and inspected All our new and used cranes, which we supply and install, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height, and optional repainting * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection Rsdpfxozilfhs Airsch You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, jib crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH373-27, 1 Vetter / Demag wall-mounted slewing crane, 250 KG capacity / lifting load Type UW2.5-6.0 Slewing radius approx. 6m, 250KG / 0.25t capacity With chain hoist, 250KG lifting capacity (2 lifting speeds) Rjdoxz Tqpepfx Airjch Total weight approx. 250 kg Year of manufacture 2004, with inspection logbook Complete with wall bracket, jib arm, chain hoist, cable festoon, trolley, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim Unit is fully dismantled and immediately available See pictures Shipping by freight or pick-up Please request shipping costs according to postal code

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,000 h, clamping force: 1,200 kN, screw diameter: 40 mm, Hydraulic injection moulding machine manufactured in 2013. This SUMITOMO SHI DEMAG Systec 120/470-430 features a clamping force of 120 t and a screw diameter of 40 mm. It offers a maximum metering volume of 231 cm³ and a distance between tie bars of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 120/470-430 machine we have for sale. Contact us for further details. Rodoz Eq Svepfx Airech - Max. Specific Injection Pressure: 2025 bar- Max. Metering/Dosing Volume: 231 cm³- Mold Height Min./Max.: 250 / 850 mm- Distance Between Tie Bars: 470 x 470 mm- Centering Ring Diameter (Ejector/Nozzle): 125 mm- Core Pull: 1 circuit via switching valve on movable mold platen (Q-independent)- Operating Hours: Drives 23,000 hrs- Pump Drive Power: 22.0 kW- Power Supply: 400 V +-10% / 50 Hz, 3 Ph + N + PE- Oil Cooler Max Water Temp: 25°C

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 1,39,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Screw length: 20 l/d Redpfx Ajy T Hz Isirech Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Redpfx Asz D Ttgoirjch Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN NJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 30 kW (38 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1830 / 1900 per hour Dry cycles without nozzle retraction: 2200 / 2300 per hour Net weight (without oil): 6200 kg Dimensions (L x W x H): 5.1 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A) Rcedpfsz D Uv Njx Airjh Demag Ergotech 150-840 NC4 INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 45 kW (53 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1700 / 1870 per hour Dry cycles without nozzle retraction: 2000 / 2200 per hour Net weight (without oil): 7700 kg Dimensions (L x W x H): 5.4 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A)

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm Rcjdowvkgmopfx Airoh injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN

Condition: used, Electric chain hoist crane DEMAG type PK1N-F Serial No. 1498030 Rcedpfx Aeyy Df Rjireh Load capacity: 125 kg Hook travel: 4 meters Distance from suspension to load hook: 410 mm Lifting speed: 8 m/min Fine lifting speed: 2 m/min Pendant cable length: approx. 1.1 meters Power supply: 380 Volt, 50 Hz 1 chain fall = 125 kg - Emergency stop Weight: 20 kg Good condition

Condition: good (used), Year of construction: 1996, Motor for light-duty overhead cranes. Hook travel: 3 m Load capacity: 0.4 t Width: approx. 500 mm Height: approx. 300 mm Depth: approx. 300 mm Weight: approx. 25 kg Rsdjy Urlnspfx Airech Condition: good, second-hand

Condition: used, Year of construction: 1993, machine/vehicle number: HZ668, DEMAG KBK 2 – Overhead Crane System, Bridge Crane, Hall Crane The images show an example overhead crane system with the components listed below. These components are also available individually! Rjdpfjy Ufddjx Airjch Please request a quote for your overhead crane system, tailored to your specific dimensions. Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg. KBK 2-R left-hand switch (with collector line) KBK 2-R swivel disc, 2000 mm (with collector line and electric swivel function) 71515146 KBK 2-R curved rails 15, 30, 45, 60, 90 degrees (with collector line) KBK 2-R rails (with collector line) The system can be delivered completely according to your requirements. Rails, rail connectors, trolleys, end plates, cable carriers, supports/hangers, and accessories are available. Chain hoists available upon request. Very good, used condition. Shipping via freight forwarder is possible. Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ZBA112 A4 / A70D, power: 4 kW (5.44 HP), rotational speed (max.): 1,440 rpm, Demag motor ZBA112 A-4 Gearbox A70D H-1-44.1) 4 units in stock Condition: Used, in very good condition. ED=100% 4.0 kW 1440 rpm Brake 47.0 Nm B140 Redeywi Edepfx Airoch 400V 50Hz Price on request

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Rcodpfxjrft Nze Airjh Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim See pictures

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 Rsdpfxjptlbls Airoch with impeller for crane rail 2 pieces available, price per piece

Condition: new, DEMAG hoist motors / crane motors / travel motors / drive motors: 1. Hoist motor type - MBV 132 C 12/2 - 1 piece (new). 2. Hoist motor type - MBV 100 A 12/2 - 1 piece (new). 3. Hoist motor type - ZNK 100 A 8/2 - 10 pieces (new). 4. Hoist motor type - ZNK 80 A 8/2 - 1 piece (new). 5. Travel motor type - ZBF 90 B 8/2 - 2 pieces (new). Rcodpfxeu U Uzns Airsh 6. Travel motor type - ZBS 80 b 12 - 8 pieces (new). 7. Travel motor type - ZBA 132 AL B050 - 1 piece 8. Travel motor type - KBA 80 B4 - 1 piece (new). 9. Traction motor type - KBA 90 B4 - 2 pieces 10. Traction motor type - ZBA 80 A4 - 2 pieces 11. Lifting motor type - 24/14 K4 P - 1 piece 12. Lifting motor type - 13/6 KF2 - 1 piece 13. Lifting motor type - 13/6 L4 - 1 piece 14. Traction motor type - 13/6 KF 8-2 - 2 pieces

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0365, DEMAG KBK overhead crane, span approximately 4x4m – expandable upon request! Rsdpfx Ajztutvsiroch Load capacity / lifting capacity: 500 KG - 0.5 tons Technical data of the system: Overhead crane track made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Includes Dalmec manipulator PFS 120KG NL Articulating boom, rotatable 360 degrees, with approximately 3m reach The crane is disassembled and immediately available Very good condition, see pictures The item is located in 75053 Gondelsheim Shipping via freight forwarder or collection only by prior appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please inquire about your overhead crane with the required load capacity and dimensions.

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg Rsdpfxsxmi R Ae Airech -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: TD2002/2360, DEMAG KBK overhead crane system with approximate dimensions of 3x4m (4m span) This crane is available in multiple units! Other sizes are also available – please inquire! Load capacity / lifting capacity: 800 kg - 0.8 tons Technical data of the system: Crane system with Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. The crane has internal power supply Includes 800 kg Demag DKES chain hoist (infinitely variable) - lifting height approx. 3m The crane is disassembled and immediately available Very good condition, see pictures The item is located in 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Rodjztut Nopfx Airjch Other KBK systems are also available. Load capacity 125 kg - 1600 kg Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Rodpfx Aijw Ixz Usrsch Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: used, CNC CONTROL Controller: C-Dias CLAMPING UNIT Clamping force kN: 4.200 Tie-bar clearance (H x V) mm: 820 INJECTION UNIT Injection unit size (Euromap): 2300 Screw diameter mm: 70 Max. shot weight (PS) g: 1.100 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 4 Hot runner control zones: 40 Handling robot (model / year): Wittmann DR 832 (2015) Robot strokes X / Y / Z mm: 900 / 1.600 / 2.500 Robot rotary axes (B / C): C servo 180° / B servo 270° DRIVE Rcjdpfsz Alptox Airsh Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 187 + 114