Used Demag Pk 2 for sale (505)

Condition: ready for operation (used), Year of construction: 1998, Clamping Unit Clamping force 4200 Kn This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Ledexl H D Ropfx Aabohn Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg Lhjdpoxmi R Aofx Aabjn -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Condition: good (used), Year of construction: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Ljdorgw Exepfx Aabshn Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 26,500 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 Bh Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar distance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1,180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm Screw L/D ratio: 20 Lhjdoxn N H Tjpfx Aabjn Shot volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2,050 bar Wear-resistant screw; bimetallic barrel, standard L:D Check valve (RSP), 3-piece, ring type Increased injection speed: 300 mm/s Additional Equipment Increased mould installation height (min. unchanged, max. increased) Electrical/hydraulic interface for connecting 2 hydraulic cores on the moving mould platen via a separate hydraulic unit Offer valid for the injection moulding machine only

Condition: used, Demag 3.2T Overhead Travelling Gantry Crane, Span Approx 14m Wide, Remote Pendant Operated. S/No. 51087901CE - No CE Mark, Terms & Conditions Apply Lsdpfxexp H A Uo Aabshn Please Note: Dismantling and Loading will be carried out by our own supplier. Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described. Please Note: Dismantling and Loading will be carried out by our own supplier. More information to follow...

Condition: good (used), 25 HP, 10 bar, 2570 l/min Lhodpfjxliv Asx Aaben

Condition: ready for operation (used), Year of construction: 2005, Clamping Unit Clamping force 4200 Kn This DEMAG Ergotech 420/810-2300 was manufactured in 2005. It is a hydraulic injection moulding machine featuring a clamping force of 4200Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 420/810-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Ljdpfxoxl H Dwe Aabohn Injection Moulding

Condition: good (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 315 kg -Base plate: 380 x 380 mm -Thrust: 2,500 mm -Total height: 2,530 mm Ledpfx Aoxmi Areabohn -Hook height: 1,325 mm -Chain hoist: DEMAG type DC-Pro 5 315 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 1.9 m/min -Transport dimensions: 800/2810/H750 mm -Own weight: 306 kg

Condition: ready for operation (used), functionality: fully functional, power: 27.21 kW (37.00 HP), overall weight: 7,500 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, Year of construction: 1970, operating hours: 2,314 h, Equipment: additional headlights, cable winch, hydraulics, DEMAG mobile crane V 42 from government ownership, little used, year of manufacture 1970, engine 3-cylinder air-cooled, max reach 5.95 m, max lifting capacity 4 tons. Sale only to businesses and with exclusion of any warranty. Lhodpfow Ivldsx Aabjn Loading possible.

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons 2 x core pullers on movable platten Ljdpfoxd Sz Ejx Aabjhn \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)

Condition: used, DEMAG 3.2t / 9.3m Lodpfxsxg Agwj Aabohn

Condition: used, Year of construction: 2009, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: Description SGM Operating hours Cycle counter Lhodpfx Aajxpufdsbjn Cylinder heating Electric drives Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Demag 210: Screw diameter Ø 50 mm

Condition: good (used), functionality: fully functional, -KOM 3161- Offered here is a load crane from Demag. The crane can lift up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, which consists of the chain and hook block. The dimensions can be found in the last image. Unfortunately, the type plate on the drive unit is no longer present. Lhjdpfx Aoxcnvpsabjn

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane Lsdjtpkv Aopfx Aabohn -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: new, DEMAG hoist motors / crane motors / travel motors / drive motors: 1. Hoist motor type - MBV 132 C 12/2 - 1 piece (new). 2. Hoist motor type - MBV 100 A 12/2 - 1 piece (new). 3. Hoist motor type - ZNK 100 A 8/2 - 10 pieces (new). 4. Hoist motor type - ZNK 80 A 8/2 - 1 piece (new). 5. Travel motor type - ZBF 90 B 8/2 - 2 pieces (new). 6. Travel motor type - ZBS 80 b 12 - 8 pieces (new). 7. Travel motor type - ZBA 132 AL B050 - 1 piece 8. Travel motor type - KBA 80 B4 - 1 piece (new). 9. Traction motor type - KBA 90 B4 - 2 pieces 10. Traction motor type - ZBA 80 A4 - 2 pieces 11. Lifting motor type - 24/14 K4 P - 1 piece Lhjdpfxeu U Uzns Aabsn 12. Lifting motor type - 13/6 KF2 - 1 piece 13. Lifting motor type - 13/6 L4 - 1 piece 14. Traction motor type - 13/6 KF 8-2 - 2 pieces

Condition: good (used), Total height: 2960mm Lhedpfx Ajik E S Dsabon Lifting range: 1100-2400mm Boom length: 900mm

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 106 cm³, injection pressure: 2,750 bar, overall weight: 5,000 kg, screw conveyor diameter: 30 mm, electric dosing: 15 kW electrc clamping: 9,8 kW You can find all technical data on our homepage! Payment: 100% prior to delivery Manufacturer: Demag Type: Ergotech EL EXIS S 6 Condition: technisch überarbeitet CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 350 mm Mould installation height min.: 160 mm Mould installation height max.: - Tie bar distance (h x v): 370 x 370 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: - Ljdpfxeh Nvnws Aabjhn Screw diameter: 30 mm Injection weight in polystyrol: 100 g Stroke volume: 106 cm³ Einspritzdruck: 2.750 bar CONTROL: NC4 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: - Pump drive power: 5,5 kW Total installed power: Motor + Heizung Total weight: 5.000 kg Total size L x B x H: 4,6 x 1,5 x 2,0 m

Condition: used, Year of construction: 2007, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 Designation: SGM Operating hours: 29,125 Cycle counter: 26,530 Total cycles: 3,562,329 Lodexpudmopfx Aabohn Cylinder heating, electric drives Sumitomo Demag IntElect 150/520-610 Demag 150: Screw diameter Ø 45 mm

Condition: like new (used), DEMAG chain hoist DKUN 10 - 2.5 tons. Lhedpfxjxpw N Sj Aabjn

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Ledpfowz R Iuox Aabehn Freight basis: ex-works

Condition: used, DEMAG hoist motor / crane motor - 4 units. Lodpfx Asxpw Iueabohn Hoist motor type - KBH 125 B4 - 1 unit Hoist motor type - KBH 112 B4 - 1 unit (new) Hoist motor type - KBH 100 B 8/2 - 2 units

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar Lodpfsh Nv Itsx Aabshn - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Ledpfewlkcajx Aabohn Payment terms: 100% before takeover of the machine, net

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine Lhodpfx Aasrr Ehmobon - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, Year of construction: 2008, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, load hours: 35,000 h, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Ledpfswlkb Nox Aabjhn Payment terms: 100% before takeover of the machine, net